PSMB10 (Proteasome subunit beta type-10) ELISA Kit (HUFI07016)
- SKU:
- HUFI07016
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P40306
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- beta2i, LMP10, Low molecular mass protein 10, Macropain subunit MECl 1, MECL1, Proteasome MECl 1, Proteasome subunit beta 2i, PSMB10
- Reactivity:
- Human
Description
PSMB10 (Proteasome subunit beta type-10) ELISA Kit (HUFI07016)
The PSMB10 (Proteasome Subunit Beta Type 10) ELISA Kit is a reliable and accurate tool for detecting levels of PSMB10 in various biological samples such as serum, plasma, and cell culture supernatants. With its high sensitivity and specificity, this kit ensures precise and reproducible results, making it suitable for a wide range of research applications.PSMB10 is a key component of the proteasome complex, playing a critical role in protein degradation and regulation of cellular processes.
Dysregulation of PSMB10 has been linked to various diseases including cancer, autoimmune disorders, and neurodegenerative conditions, underscoring its importance as a potential biomarker for disease progression and therapeutic development.By utilizing the PSMB10 ELISA Kit, researchers can gain valuable insights into the role of PSMB10 in health and disease, paving the way for innovative research and therapeutic strategies.
| Product Name: | PSMB10 (Proteasome subunit beta type-10) ELISA Kit |
| Product Code: | HUFI07016 |
| Size: | 96 Assays |
| Alias: | beta2i ELISA Kit, LMP10 ELISA Kit, Low molecular mass protein 10 ELISA Kit, Macropain subunit MECl 1 ELISA Kit, MECL1 ELISA Kit, Proteasome MECl 1 ELISA Kit, Proteasome subunit beta 2i ELISA Kit, PSMB10 ELISA Kit |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of PSMB10 (Proteasome subunit beta type-10) concentrations in serum plasma and other biological fluids. |
| Sensitivity: | < 0.094ng/ml |
| Range: | 0.156-10ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of PSMB10 (Proteasome subunit beta type-10) and the recovery rates were calculated by comparing the measured value to the expected amount of PSMB10 (Proteasome subunit beta type-10) in samples. Enquire for more information. |
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of PSMB10 (Proteasome subunit beta type-10) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. Enquire for more information. |
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| UniProt Protein Function: | PSMB10: The proteasome is a multicatalytic proteinase complex which is characterized by its ability to cleave peptides with Arg, Phe, Tyr, Leu, and Glu adjacent to the leaving group at neutral or slightly basic pH. The proteasome has an ATP-dependent proteolytic activity. This subunit is involved in antigen processing to generate class I binding peptides. Belongs to the peptidase T1B family. |
| UniProt Protein Details: | Protein type:EC 3.4.25.1; Protease; Proteasome complex Chromosomal Location of Human Ortholog: 16q22.1 Cellular Component: proteasome complex; nucleoplasm; proteasome core complex; cytosol Molecular Function:threonine endopeptidase activity Biological Process: positive regulation of ubiquitin-protein ligase activity during mitotic cell cycle; negative regulation of ubiquitin-protein ligase activity during mitotic cell cycle; protein polyubiquitination; viral reproduction; apoptosis; cell morphogenesis; antigen processing and presentation of exogenous peptide antigen via MHC class I, TAP-dependent; DNA damage response, signal transduction by p53 class mediator resulting in cell cycle arrest; humoral immune response; T cell proliferation; regulation of apoptosis; antigen processing and presentation of peptide antigen via MHC class I; regulation of ubiquitin-protein ligase activity during mitotic cell cycle; anaphase-promoting complex-dependent proteasomal ubiquitin-dependent protein catabolic process; antigen processing and presentation of exogenous peptide antigen via MHC class I; gene expression; mitotic cell cycle; regulation of amino acid metabolic process; G1/S transition of mitotic cell cycle; negative regulation of apoptosis |
| NCBI Summary: | The proteasome is a multicatalytic proteinase complex with a highly ordered ring-shaped 20S core structure. The core structure is composed of 4 rings of 28 non-identical subunits; 2 rings are composed of 7 alpha subunits and 2 rings are composed of 7 beta subunits. Proteasomes are distributed throughout eukaryotic cells at a high concentration and cleave peptides in an ATP/ubiquitin-dependent process in a non-lysosomal pathway. An essential function of a modified proteasome, the immunoproteasome, is the processing of class I MHC peptides. This gene encodes a member of the proteasome B-type family, also known as the T1B family, that is a 20S core beta subunit. Proteolytic processing is required to generate a mature subunit. Expression of this gene is induced by gamma interferon, and this gene product replaces catalytic subunit 2 (proteasome beta 7 subunit) in the immunoproteasome. [provided by RefSeq, Jul 2008] |
| UniProt Code: | P40306 |
| NCBI GenInfo Identifier: | 730376 |
| NCBI Gene ID: | 5699 |
| NCBI Accession: | P40306.1 |
| UniProt Secondary Accession: | P40306,Q5U098, B2R5J4, |
| UniProt Related Accession: | P40306 |
| Molecular Weight: | 273 |
| NCBI Full Name: | Proteasome subunit beta type-10 |
| NCBI Synonym Full Names: | proteasome (prosome, macropain) subunit, beta type, 10 |
| NCBI Official Symbol: | PSMB10 |
| NCBI Official Synonym Symbols: | LMP10; MECL1; beta2i |
| NCBI Protein Information: | proteasome subunit beta type-10; proteasome MECl-1; macropain subunit MECl-1; proteasome subunit MECL1; proteasome subunit beta 7i; proteasome subunit beta-2i; low molecular mass protein 10; proteasome catalytic subunit 2i; multicatalytic endopeptidase complex subunit MECl-1 |
| UniProt Protein Name: | Proteasome subunit beta type-10 |
| UniProt Synonym Protein Names: | Low molecular mass protein 10; Macropain subunit MECl-1; Multicatalytic endopeptidase complex subunit MECl-1; Proteasome MECl-1; Proteasome subunit beta-2i |
| Protein Family: | Proteasome |
| UniProt Gene Name: | PSMB10 |
| UniProt Entry Name: | PSB10_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37 °C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37 °C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37 °C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37 °C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human Proteasome Subunit Beta Type 6 (PSMb6) ELISA Kit
Human PSMB9 / Proteasome subunit beta type-9 ELISA Kit
Human Proteasome subunit beta type-8 (PSMB8) ELISA Kit (HUEB1217)
Mouse Proteasome subunit beta type-9 (Psmb9) ELISA Kit (MOEB0976)
Human Proteasome subunit beta type-9 (PSMB9) ELISA Kit (HUEB1213)
Dog Proteasome subunit beta type-8 (PSMB8) ELISA Kit (CNEB0219)
Bovine Proteasome subunit beta type-9 (PSMB9) ELISA Kit (BOEB0524)
