null

Dog Tumor necrosis factor (TNF) ELISA Kit (CNEB0043)

SKU:
CNEB0043
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P51742
Range:
12.5-800 pg/mL
ELISA Type:
Sandwich
Synonyms:
TNFalpha, Tumor Necrosis Factor Alpha, TNF-alpha, DIF, TNF-alpha, TNFA, TNFSF2
Reactivity:
Canine
$599

Description

system_update_altDatasheetsystem_update_altMSDS

Dog Tumor necrosis factor (TNF) ELISA Kit

The Dog Tumor Necrosis Factor (TNF) ELISA Kit is specifically designed for the precise measurement of TNF levels in dog samples such as serum, plasma, and tissue lysates. This kit offers exceptional sensitivity and specificity, delivering consistent and accurate results for a variety of research purposes.TNF is a key inflammatory cytokine that plays a critical role in immune response, inflammation, and the regulation of cell death. Dysregulation of TNF levels has been implicated in various diseases, including cancer, autoimmune disorders, and infectious diseases.

By detecting and quantifying TNF levels, researchers can gain valuable insights into disease mechanisms and potential therapeutic targets in dogs.Overall, the Dog Tumor Necrosis Factor (TNF) ELISA Kit is an invaluable tool for studying immunological responses and inflammatory processes in dogs, with the potential to contribute to the development of new diagnostic and therapeutic strategies for canine diseases.

Product Name:Dog Tumor necrosis factor (TNF) ELISA Kit
SKU:CNEB0043
Size:96T
Target:Dog Tumor necrosis factor (TNF)
Synonyms:Cachectin, TNF-alpha, Tumor necrosis factor ligand superfamily member 2, TNF-a, TNFA, TNFSF2
Assay Type:Sandwich
Detection Method:ELISA
Reactivity:Dog
Detection Range:12.5-800pg/mL
Sensitivity:6.25pg/mL
Intra CV:Provided with the Kit
Inter CV:Provided with the Kit
Linearity:
Sample1:21:41:81:16
Serum(N=5)80-90%86-96%108-116%88-100%
EDTA Plasma(N=5)95-106%109-120%102-112%104-113%
Heparin Plasma(N=5)111-120%101-114%100-109%107-115%
Recovery:Provided with the Kit
Function:Cytokine that binds to TNFRSF1A/TNFR1 and TNFRSF1B/TNFBR. It is mainly secreted by macrophages and can induce cell death of certain tumor cell lines. It is potent pyrogen causing fever by direct action or by stimulation of interleukin-1 secretion and is implicated in the induction of cachexia, Under certain conditions it can stimulate cell proliferation and induce cell differentiation.
Uniprot:P51742
Sample Type:Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids
Specificity:Natural and recombinant dog Tumor necrosis factor
Sub Unit:Homotrimer.
Research Area:Neurosciences
Subcellular Location:Tumor necrosis factor, soluble form Secreted
Storage:Please see kit components below for exact storage details
Note:For research use only
UniProt Protein Function:Cytokine that binds to TNFRSF1A/TNFR1 and TNFRSF1B/TNFBR. It is mainly secreted by macrophages and can induce cell death of certain tumor cell lines. It is potent pyrogen causing fever by direct action or by stimulation of interleukin-1 secretion and is implicated in the induction of cachexia, Under certain conditions it can stimulate cell proliferation and induce cell differentiation.The TNF intracellular domain (ICD) form induces IL12 production in dendritic cells.
UniProt Code:P51742
NCBI GenInfo Identifier:1729984
NCBI Gene ID:403922
NCBI Accession:P51742.1
UniProt Secondary Accession:P51742,Q006K5, Q28339,
UniProt Related Accession:P51742
Molecular Weight:25,447 Da
NCBI Full Name:Tumor necrosis factor
NCBI Synonym Full Names:tumor necrosis factor
NCBI Official Symbol:TNF
NCBI Official Synonym Symbols:TNFA; cTNF; TNLG1F
NCBI Protein Information:tumor necrosis factor
UniProt Protein Name:Tumor necrosis factor
UniProt Synonym Protein Names:Cachectin; TNF-alpha; Tumor necrosis factor ligand superfamily member 2; TNF-a
Protein Family:Tumor necrosis factor
UniProt Gene Name:TNF
Component Quantity (96 Assays) Storage
ELISA Microplate (Dismountable) 8×12 strips -20°C
Lyophilized Standard 2 -20°C
Sample Diluent 20ml -20°C
Assay Diluent A 10mL -20°C
Assay Diluent B 10mL -20°C
Detection Reagent A 120µL -20°C
Detection Reagent B 120µL -20°C
Wash Buffer 30mL 4°C
Substrate 10mL 4°C
Stop Solution 10mL 4°C
Plate Sealer 5 -

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir

*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.

Step
1. Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C.
2. Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform.
3. Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper.
4. Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C.
5. Repeat the wash process for five times as conducted in step 3.
6. Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction.
7. Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
8. Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters.
9. After experiment, store all reagents according to the specified storage temperature respectively until their expiry.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products