null

Mouse SNAP25 / Synaptosomal-associated protein 25 ELISA Kit

SKU:
MOFI00454
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P60879
Sensitivity:
0.188ng/ml
Range:
0.313-20ng/ml
ELISA Type:
Sandwich
Synonyms:
Snap25, Synaptosomal-associated protein 25, SNAP-25, Super protein, SUP, Synaptosomal-associated 25 kDa protein, SNAP, RIC4, SEC9, SNAP, RIC-4, SNAP-25
Reactivity:
Mouse
€649
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Mouse SNAP25/Synaptosomal-associated protein 25 ELISA Kit

The Mouse SNAP25 (Synaptosomal-Associated Protein 25) ELISA Kit is specifically engineered for the precise and sensitive measurement of SNAP25 levels in mouse serum, plasma, and cell culture supernatants. This cutting-edge kit is designed with high accuracy and reliability in mind, ensuring dependable and consistent results for a variety of scientific investigations.SNAP25 is a crucial protein involved in synaptic vesicle fusion and neurotransmitter release, playing a vital role in neuronal communication and overall brain function.

Dysregulation of SNAP25 has been implicated in various neurological disorders, including epilepsy, schizophrenia, and Alzheimer's disease, highlighting its importance as a biomarker for studying these conditions and developing potential therapeutic interventions.With its advanced technology and user-friendly design, the Mouse SNAP25 ELISA Kit is a valuable tool for researchers seeking to deepen their understanding of synaptic transmission and explore novel treatment strategies for neurological disorders.

Product Name:Mouse SNAP25 / Synaptosomal-associated protein 25 ELISA Kit
Product Code:MOFI00454
Size:96 Assays
Alias:Snap25, Synaptosomal-associated protein 25, SNAP-25, Super protein, SUP, Synaptosomal-associated 25 kDa protein, SNAP, RIC4, SEC9, SNAP, RIC-4, SNAP-25
Detection Method:Sandwich ELISA
Application:This immunoassay kit allows for the in vitro quantitative determination of Mouse Snap25 concentrations in serum plasma and other biological fluids.
Sensitivity:0.188ng/ml
Range:0.313-20ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery: Matrices listed below were spiked with certain level of Mouse Snap25 and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse Snap25 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)85-10294
EDTA plasma(n=5)90-10497
UFH plasma(n=5)86-10593
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse Snap25 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)89-99%85-94%92-105%
EDTA plasma(n=5)88-101%87-98%82-97%
UFH plasma(n=5)80-96%87-99%84-100%
Intra Assay:CV <8%
Inter Assay:CV <10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8-12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotP60879
UniProt Protein Function:SNAP-25: a presynaptic plasma membrane protein involved in the regulation of neurotransmitter release. May play an important role in the synaptic function of specific neuronal systems. Part of the SNARE core complex containing SNAP25, VAMP2 and syntaxin 1A. Associates with proteins involved in vesicle docking and membrane fusion. Two alternatively spliced isoforms have been described.
UniProt Protein Details:

Protein type:Vesicle

Cellular Component: actin cytoskeleton; axon; cell junction; cell soma; cytoplasm; cytosol; endosome; filopodium; growth cone; intracellular organelle; lamellipodium; lipid raft; membrane; myelin sheath; neuron projection; perinuclear region of cytoplasm; plasma membrane; SNARE complex; synapse; terminal button; trans-Golgi network; vesicle; voltage-gated potassium channel complex

Molecular Function:calcium-dependent protein binding; myosin binding; protein binding; protein domain specific binding; protein N-terminus binding; SNAP receptor activity; SNARE binding; syntaxin-1 binding; voltage-gated potassium channel activity

Biological Process: associative learning; calcium ion-dependent exocytosis of neurotransmitter; endosome transport; locomotory behavior; long-term memory; neurotransmitter secretion; positive regulation of hormone secretion; sleep; synaptic vesicle fusion to presynaptic membrane; synaptic vesicle priming

UniProt Code:P60879
NCBI GenInfo Identifier:46397725
NCBI Gene ID:20614
NCBI Accession:P60879.1
UniProt Secondary Accession:P60879,P13795, P36974, P70557, P70558, Q8IXK3, Q96FM2 Q9BR45, A2AIC2, A2AIC3,
UniProt Related Accession:P60879
Molecular Weight:23,336 Da
NCBI Full Name:Synaptosomal-associated protein 25
NCBI Synonym Full Names:synaptosomal-associated protein 25
NCBI Official Symbol:Snap25  
NCBI Official Synonym Symbols:sp; Bdr; SUP; GENA70; SNAP-25  
NCBI Protein Information:synaptosomal-associated protein 25
UniProt Protein Name:Synaptosomal-associated protein 25
UniProt Synonym Protein Names:Super protein; SUP; Synaptosomal-associated 25 kDa protein
UniProt Gene Name:Snap25  
UniProt Entry Name:SNP25_MOUSE

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

Plasma:

Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 - g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.

Urine & Cerebrospinal Fluid:

Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.

Cell culture supernatant:

Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.

Cell lysates:

Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.

Tissue homogenates:

The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.

Tissue lysates:

Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.

Breast Milk:

Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products