Human Interferon regulatory factor 3 (IRF3) ELISA Kit (HUEB1604)
- SKU:
- HUEB1604
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- Q14653
- Range:
- 0.312-20 ng/mL
- ELISA Type:
- Sandwich
- Synonyms:
- IRF3, Interferon regulatory factor 3, IRF-3
- Reactivity:
- Human
Description
Human Interferon regulatory factor 3 (IRF3) ELISA Kit
The Human Interferon Regulatory Factor 3 (IRF3) ELISA Kit is a powerful tool for accurately measuring levels of IRF3 in human samples such as serum, plasma, and cell culture supernatants. This kit boasts high sensitivity and specificity, guaranteeing precise and consistent results, making it perfect for a wide variety of research studies.IRF3 is a key transcription factor that plays a critical role in the immune response by regulating the expression of interferons in response to viral infections.
It is also involved in inflammatory pathways and autoimmune diseases. Understanding the levels of IRF3 in different conditions can provide valuable insights into the immune system and may offer potential targets for therapeutic interventions.Overall, the Human IRF3 ELISA Kit is an essential tool for researchers studying immune responses, viral infections, and autoimmune diseases, allowing for accurate and reliable quantification of IRF3 levels in human samples.
| Product Name: | Human Interferon regulatory factor 3 (IRF3) ELISA Kit |
| SKU: | HUEB1604 |
| Size: | 96T |
| Target: | Human Interferon regulatory factor 3 (IRF3) |
| Synonyms: | IRF-3 |
| Assay Type: | Sandwich |
| Detection Method: | ELISA |
| Reactivity: | Human |
| Detection Range: | 0.312-20ng/mL |
| Sensitivity: | 0.078ng/mL |
| Intra CV: | 5.6% | ||||||||||||||||||||
| Inter CV: | 9.8% | ||||||||||||||||||||
| Linearity: |
| ||||||||||||||||||||
| Recovery: |
| ||||||||||||||||||||
| Function: | Key transcriptional regulator of type I interferon (IFN)-dependent immune responses which plays a critical role in the innate immune response against DNA and RNA viruses. Regulates the transcription of type I IFN genes (IFN-alpha and IFN-beta) and IFN-stimulated genes (ISG) by binding to an interferon-stimulated response element (ISRE) in their promoters. Acts as a more potent activator of the IFN-beta (IFNB) gene than the IFN-alpha (IFNA) gene and plays a critical role in both the early and late phases of the IFNA/B gene induction. Found in an inactive form in the cytoplasm of uninfected cells and following viral infection, double-stranded RNA (dsRNA), or toll-like receptor (TLR) signaling, is phosphorylated by IKBKE and TBK1 kinases. This induces a conformational change, leading to its dimerization and nuclear localization and association with CREB binding protein (CREBBP) to form dsRNA-activated factor 1 (DRAF1), a complex which activates the transcription of the type I IFN and ISG genes. Can activate distinct gene expression programs in macrophages and can induce significant apoptosis in primary macrophages. |
| Uniprot: | Q14653 |
| Sample Type: | Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids |
| Specificity: | Natural and recombinant human Interferon regulatory factor 3 |
| Sub Unit: | (Microbial infection) Interacts with herpes virus 8/HHV-8 protein VIRF1 (PubMed:11314014). |
| Research Area: | Immunology |
| Subcellular Location: | Cytoplasm Nucleus Shuttles between cytoplasmic and nuclear compartments, with export being the prevailing effect. When activated, IRF3 interaction with CREBBP prevents its export to the cytoplasm. |
| Storage: | Please see kit components below for exact storage details |
| Note: | For research use only |
| UniProt Protein Function: | IRF3: interferon regulatory factor 3, a member of the interferon regulatory transcription factor (IRF) family. IRF3 is found in an inactive cytoplasmic form that upon serine/threonine phosphorylation forms a complex with CREBBP. This complex translocates to the nucleus and activates the transcription of interferons alpha and beta, as well as other interferon-induced genes. |
| UniProt Protein Details: | Protein type:DNA-binding; Transcription factor Chromosomal Location of Human Ortholog: 19q13.3-q13.4 Cellular Component: nucleoplasm; cytoplasm; nucleus; cytosol Molecular Function:identical protein binding; protein binding; protein homodimerization activity; DNA binding; transcription cofactor activity; transcription factor activity Biological Process: transcription from RNA polymerase II promoter; negative regulation of interferon-beta biosynthetic process; positive regulation of I-kappaB kinase/NF-kappaB cascade; viral reproduction; apoptosis; MyD88-independent toll-like receptor signaling pathway; cytokine and chemokine mediated signaling pathway; toll-like receptor 3 signaling pathway; negative regulation of transcription from RNA polymerase II promoter; negative regulation of defense response to virus by host; response to exogenous dsRNA; positive regulation of interferon type I production; lipopolysaccharide-mediated signaling pathway; toll-like receptor signaling pathway; positive regulation of interferon-beta production; innate immune response; interferon type I biosynthetic process; defense response to virus; toll-like receptor 4 signaling pathway; response to DNA damage stimulus; negative regulation of interferon type I production; positive regulation of interferon-alpha production; positive regulation of cytokine secretion Disease: Herpes Simplex Encephalitis, Susceptibility To, 7 |
| NCBI Summary: | This gene encodes a member of the interferon regulatory transcription factor (IRF) family. The encoded protein is found in an inactive cytoplasmic form that upon serine/threonine phosphorylation forms a complex with CREBBP. This complex translocates to the nucleus and activates the transcription of interferons alpha and beta, as well as other interferon-induced genes. Alternatively spliced transcript variants encoding multiple isoforms have been observed for this gene. [provided by RefSeq, Nov 2011] |
| UniProt Code: | Q14653 |
| NCBI GenInfo Identifier: | 2497442 |
| NCBI Gene ID: | 3661 |
| NCBI Accession: | Q14653.1 |
| UniProt Secondary Accession: | Q14653,Q5FBY1, Q5FBY2, Q5FBY4, Q7Z5G6, A8K7L2, B2RAZ3 |
| UniProt Related Accession: | Q14653 |
| Molecular Weight: | 12,330 Da |
| NCBI Full Name: | Interferon regulatory factor 3 |
| NCBI Synonym Full Names: | interferon regulatory factor 3 |
| NCBI Official Symbol: | IRF3 |
| NCBI Protein Information: | interferon regulatory factor 3 |
| UniProt Protein Name: | Interferon regulatory factor 3 |
| Protein Family: | Interferon regulatory factor |
| UniProt Gene Name: | IRF3 |
| UniProt Entry Name: | IRF3_HUMAN |
| Component | Quantity (96 Assays) | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | -20°C |
| Lyophilized Standard | 2 | -20°C |
| Sample Diluent | 20ml | -20°C |
| Assay Diluent A | 10mL | -20°C |
| Assay Diluent B | 10mL | -20°C |
| Detection Reagent A | 120µL | -20°C |
| Detection Reagent B | 120µL | -20°C |
| Wash Buffer | 30mL | 4°C |
| Substrate | 10mL | 4°C |
| Stop Solution | 10mL | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.
| Step | |
| 1. | Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C. |
| 2. | Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform. |
| 3. | Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper. |
| 4. | Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C. |
| 5. | Repeat the wash process for five times as conducted in step 3. |
| 6. | Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction. |
| 7. | Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing. |
| 8. | Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters. |
| 9. | After experiment, store all reagents according to the specified storage temperature respectively until their expiry. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Bovine Interferon regulatory factor 3 (IRF3) ELISA Kit (BOEB0721)
Porcine Interferon regulatory factor 3 (IRF3) ELISA Kit (PREB0408)
Mouse Interferon regulatory factor 3 (Irf3) ELISA Kit (MOEB1364)
Chicken Interferon regulatory factor 3 (IRF3) ELISA Kit (CHEB0320)
Human Interferon Regulatory Factor 5 (IRF5) ELISA Kit Regulatory Factor 5 (IRF5) ELISA Kit (HUDL01554)
Human Interferon Regulatory Factor 9 (IRF9) ELISA Kit (HUDL01555)
Human Interferon regulatory factor 5 (IRF5) ELISA Kit (HUEB1876)
Human IRF7 (Interferon regulatory factor 7) ELISA Kit (HUFI03435)
