null

TREM2 Signaling Pathways ELISA Sampler Pack

SKU:
SKFI0046
Product Type:
ELISA Kit
ELISA Type:
ELISA Sampler Pack
Size:
5 X 48 Assays
Reactivity:
Human
Analytes:
PLCG2
SYK
TYRO protein tyrosine kinase-binding protein
PLCG1
TREM2
  • Human PLCG2 / PLCG2 ELISA Kit
  • Human TREM2 / Triggering receptor expressed on myeloid cells 3 ELISA Kit
  • Human TYRO protein tyrosine kinase-binding protein ELISA Kit
  • Human Phospholipase C Gamma 1 / PLCG1 ELISA Kit
  • Human SYK / Spleen Tyrosine Kinase ELISA Kit
$1,320
Frequently bought together:

Description

TREM2 Signaling Pathways ELISA Sampler Kit

The TREM2 Signaling Pathways ELISA Kit Pack is specifically designed for the accurate and reliable detection of proteins involved in the TREM2 signaling pathways. This kit allows for the quantification of various proteins in serum, plasma, and cell culture supernatants with high sensitivity and specificity.TREM2, or Triggering Receptor Expressed on Myeloid Cells 2, is a key regulator of immune responses and inflammation in the brain. Dysregulation of TREM2 signaling has been linked to various neurodegenerative disorders such as Alzheimer's disease, making it a valuable biomarker for research and potential therapeutic development.

With this comprehensive kit pack, researchers can explore the intricate mechanisms of TREM2 signaling pathways and gain insights into the role of these pathways in neuroinflammatory diseases. Trust in the accuracy and precision of the TREM2 Signaling Pathways ELISA Kit Pack for your research needs.

TREM2 Signaling Pathways ELISA Sampler Pack

TREM2 Signaling Pathways ELISA Sampler Pack from Assay Genie allows researchers to begin their investigation into TREM2 Signaling Pathways via analysing PLCG2 / PLCG2, SYK / Spleen Tyrosine Kinase, TYRO protein tyrosine kinase-binding protein, Phospholipase C Gamma 1 / PLCG1, TREM2 / Triggering receptor expressed on myeloid cells 3 in a 48 assay format, thus allowing researchers to identify and validate analytes within the pathway.

Pack ContentsSizeReactivitySensitivityRange ELISA Type
Human PLCG2 / PLCG2 ELISA Kit48 AssaysHuman0.188ng/ml0.313-20ng/mlSandwich ELISA
Human SYK / Spleen Tyrosine Kinase ELISA Kit48 AssaysHuman0.375ng/ml0.625-40ng/mlSandwich ELISA
Human TYRO protein tyrosine kinase-binding protein ELISA Kit48 AssaysHuman0.094ng/ml0.156-10ng/mlSandwich ELISA
Human Phospholipase C Gamma 1 / PLCG1 ELISA Kit48 AssaysHuman0.094ng/ml0.156-10ng/mlSandwich ELISA
Human TREM2 / Triggering receptor expressed on myeloid cells 3 ELISA Kit48 AssaysHuman46.875pg/ml78.125-5000pg/mlSandwich ELISA

Each individual ELISA kit in this pack will come with the following components:

Component Quantity Storage
ELISA Microplate (Dismountable) 4-12 strips 4°C for 6 months
Lyophilized Standard 1 4°C/-20°C
Sample/Standard Dilution Buffer 10ml 4°C
Biotin-labeled Antibody(Concentrated) 60ul 4°C (Protect from light)
Antibody Dilution Buffer 5ml 4°C
HRP-Streptavidin Conjugate(SABC) 60ul 4°C (Protect from light)
SABC Dilution Buffer 5ml 4°C
TMB Substrate 10ml 4°C (Protect from light)
Stop Solution 5ml 4°C
Wash Buffer(25X) 15ml 4°C
Plate Sealer 3 -

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 - g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3.Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6.Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9.Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

Related Products