null

Rat ZNT-1 / SLC30A1 ELISA Kit

SKU:
RTFI00305
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q62720
Sensitivity:
46.875pg/ml
Range:
78.125-5000pg/ml
ELISA Type:
Sandwich
Synonyms:
Slc30a1, ZnT-1, Solute carrier family 30 member 1
Reactivity:
Rat
Research Area:
Signal Transduction
$779
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Rat ZNT-1/SLC30A1 ELISA Kit

The Rat ZNT-1 (SLC30A1) ELISA Kit is a reliable and efficient tool for the quantitative detection of ZNT-1 levels in rat serum, plasma, and cell culture supernatants. This kit is known for its high sensitivity and specificity, ensuring accurate and reproducible results for a variety of research applications.ZNT-1, also known as SLC30A1, is a zinc transporter protein that plays a crucial role in maintaining zinc homeostasis in cells. Dysregulation of ZNT-1 has been linked to various health conditions, including neurological disorders, diabetes, and immune system dysfunction.

Therefore, measuring ZNT-1 levels can provide valuable insights into these diseases and potential therapeutic targets.With its user-friendly protocol and quick results, the Rat ZNT-1 (SLC30A1) ELISA Kit is an essential tool for researchers studying zinc transport mechanisms and its impact on health and disease. Order yours today to enhance your research capabilities.

Product Name:Rat Slc30a1 (Zinc transporter 1) ELISA Kit
Product Code:RTFI00305
Size:96 Assays
Target:Rat Slc30a1
Alias:Slc30a1, ZnT-1, Solute carrier family 30 member 1
Reactivity:Rat
Detection Method:Sandwich ELISA, Double Antibody
Sensitivity:46.875pg/ml
Range:78.125-5000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Rat Slc30a1 and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Slc30a1 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)85-10092
EDTA plasma(n=5)92-10599
UFH plasma(n=5)87-10394
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Slc30a1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)87-105%85-104%85-99%
EDTA plasma(n=5)82-99%84-98%89-99%
UFH plasma(n=5)85-100%80-98%80-91%
Intra-Assay:CV <8%
Inter-Assay:CV <10%
Uniprot:Q62720
UniProt Protein Function:May be involved in zinc transport out of the cell.
NCBI Summary:zinc-binding carrier molecule; may function to transport zinc out of the cell [RGD, Feb 2006]
UniProt Code:Q62720
NCBI GenInfo Identifier:12408302
NCBI Gene ID:58976
NCBI Accession:NP_074044.1
UniProt Related Accession:Q62720
Molecular Weight:55,143 Da
NCBI Full Name:zinc transporter 1
NCBI Synonym Full Names:solute carrier family 30 member 1
NCBI Official Symbol:Slc30a1  
NCBI Protein Information:zinc transporter 1
UniProt Protein Name:Zinc transporter 1
UniProt Synonym Protein Names:Solute carrier family 30 member 1
Protein Family:Zinc transporter
UniProt Gene Name:Slc30a1  
StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37°C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles.

Plasma: Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid: Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell Culture Supernatant: Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell Lysates: Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.
Tissue Homogenates: The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C.
Tissue Lysates: Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk: Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products