null

Rat TRIL ELISA Kit

SKU:
RTFI00376
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q496Z2
Sensitivity:
0.094ng/ml
Range:
0.156-10ng/ml
ELISA Type:
Sandwich
Synonyms:
Tril
Reactivity:
Rat
Research Area:
Immunology
€649
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Rat TRIL ELISA Kit

The Rat TRIL ELISA Kit is a specialized assay designed for the precise measurement of TRIL levels in rat serum, plasma, and cell culture supernatants. With exceptional sensitivity and specificity, this kit guarantees accurate and consistent results, making it an invaluable tool for a variety of research studies.TRIL, also known as TLR4 interactor with leucine-rich repeats, is a critical protein involved in immune responses and inflammatory processes. It plays a vital role in modulating the activation of Toll-like receptor 4 (TLR4) signaling, which is essential for the body's defense against pathogens and regulation of inflammatory reactions.

Understanding the function and regulation of TRIL can provide insights into various diseases such as sepsis, autoimmune disorders, and chronic inflammatory conditions, paving the way for the development of targeted therapeutic interventions. Overall, the Rat TRIL ELISA Kit offers researchers a reliable and efficient method for studying TRIL biology and its implications in disease pathology, offering new possibilities for advancements in biomedical research.

Product Name:Rat Tril (TLR4 interactor with leucine rich repeats) ELISA Kit
Product Code:RTFI00376
Size:96 Assays
Target:Rat Tril
Alias:Tril
Reactivity:Rat
Detection Method:Sandwich ELISA, Double Antibody
Sensitivity:0.094ng/ml
Range:0.156-10ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Rat Tril and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Tril in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)85-10597
EDTA plasma(n=5)90-10496
UFH plasma(n=5)90-10596
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Tril and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)86-97%87-105%87-90%
EDTA plasma(n=5)84-101%84-100%91-97%
UFH plasma(n=5)81-95%85-99%80-92%
Intra-Assay:CV <8%
Inter-Assay:CV <10%
Uniprot:Q496Z2
UniProt Protein Function:TRIL: Component of the TLR4 signaling complex. Mediate the innate immune response to bacterial lipopolysaccharide (LPS) leading to cytokine secretion.
UniProt Protein Details:

Protein type:Membrane protein, integral

Cellular Component: lipopolysaccharide receptor complex

Molecular Function:lipopolysaccharide binding

Biological Process: innate immune response; regulation of cytokine production during immune response; inflammatory response; toll-like receptor 4 signaling pathway

UniProt Code:Q496Z2
NCBI GenInfo Identifier:77404405
NCBI Gene ID:362364
NCBI Accession:NP_001029182.1
UniProt Related Accession:Q496Z2
Molecular Weight:89,053 Da
NCBI Full Name:TLR4 interactor with leucine rich repeats
NCBI Synonym Full Names:TLR4 interactor with leucine-rich repeats
NCBI Official Symbol:Tril  
NCBI Official Synonym Symbols:RGD1310827  
NCBI Protein Information:TLR4 interactor with leucine rich repeats
UniProt Protein Name:TLR4 interactor with leucine rich repeats
UniProt Synonym Protein Names:Leucine-rich repeat-containing protein KIAA0644 homolog
Protein Family:TLR4 interactor with leucine rich repeats
UniProt Gene Name:Tril  
UniProt Entry Name:TRIL_RAT
StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37°C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles.

Plasma: Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid: Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell Culture Supernatant: Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell Lysates: Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.
Tissue Homogenates: The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C.
Tissue Lysates: Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk: Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products