null

Rat Synapsin-1 / SYN1 ELISA Kit (RTFI00429)

SKU:
RTFI00429
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P09951
Sensitivity:
18.75pg/ml
Range:
31.25-2000pg/ml
ELISA Type:
Sandwich
Synonyms:
Syn1, SYN1, SYN1a, SYN1b, synapsin IBrain protein 4.1, synapsin-1, SYNI
Reactivity:
Rat
€649

Description

system_update_altDatasheetsystem_update_altMSDS

Rat Synapsin-1/SYN1 ELISA Kit

The Rat Synapsin-1 (SYN1) ELISA Kit is a powerful tool for measuring levels of synapsin-1 in rat samples, including serum, plasma, and cell culture supernatants. With its high sensitivity and specificity, this kit provides accurate and reproducible results for a variety of research applications.Synapsin-1 is a key regulator of neurotransmitter release and synaptic plasticity, playing a crucial role in neuronal communication and function. Dysregulation of synapsin-1 has been implicated in various neurological disorders, including Alzheimer's disease, schizophrenia, and epilepsy, making it a valuable biomarker for studying these conditions and developing potential treatments.

Overall, the Rat Synapsin-1 (SYN1) ELISA Kit offers researchers a reliable and efficient method for investigating the role of synapsin-1 in the brain and its implications for neural function and disease pathology.

Product Name:Rat Syn1 (Synapsin-1) ELISA Kit
Product Code:RTFI00429
Size:96 Assays
Target:Rat Syn1
Alias:Syn1, SYN1, SYN1a, SYN1b, synapsin IBrain protein 4.1, synapsin-1, SYNI
Reactivity:Rat
Detection Method:Sandwich ELISA, Double Antibody
Sensitivity:18.75pg/ml
Range:31.25-2000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Rat Syn1 and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Syn1 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)86-10598
EDTA plasma(n=5)87-10194
UFH plasma(n=5)96-10199
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Syn1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)86-105%87-104%85-105%
EDTA plasma(n=5)84-100%84-101%86-101%
UFH plasma(n=5)86-95%81-98%80-98%
Intra-Assay:CV <8%
Inter-Assay:CV <10%
Uniprot:P09951
UniProt Protein Function:SYN1: neuronal phosphoprotein which associates with the cytoplasmic surface of synaptic vesicles and binds to the cytoskeleton. May function in the regulation of neurotransmitter release and of axonogenesis and synaptogenesis. Mutations may be associated with X-linked disorders with primary neuronal degeneration such as Rett syndrome. Two differentially spiced isoforms have been reported.
UniProt Protein Details:

Protein type:Vesicle

Chromosomal Location of Human Ortholog: Xp11.23

Cellular Component: Golgi apparatus; synaptic vesicle; dendrite; cytosol; cell junction

Molecular Function:protein binding; transporter activity; actin binding; protein kinase binding; calcium-dependent protein binding; catalytic activity; ATP binding

Biological Process: synaptic transmission; metabolic process; neurotransmitter secretion; regulation of neurotransmitter secretion

Disease: Epilepsy, X-linked, With Variable Learning Disabilities And Behavior Disorders

NCBI Summary:This gene is a member of the synapsin gene family. Synapsins encode neuronal phosphoproteins which associate with the cytoplasmic surface of synaptic vesicles. Family members are characterized by common protein domains, and they are implicated in synaptogenesis and the modulation of neurotransmitter release, suggesting a potential role in several neuropsychiatric diseases. This member of the synapsin family plays a role in regulation of axonogenesis and synaptogenesis. The protein encoded serves as a substrate for several different protein kinases and phosphorylation may function in the regulation of this protein in the nerve terminal. Mutations in this gene may be associated with X-linked disorders with primary neuronal degeneration such as Rett syndrome. Alternatively spliced transcript variants encoding different isoforms have been identified. [provided by RefSeq, Jul 2008]
UniProt Code:P09951
NCBI GenInfo Identifier:19924099
NCBI Gene ID:6853
NCBI Accession:NP_008881.2
UniProt Secondary Accession:P09951,O88935, P09951,
UniProt Related Accession:P17600
Molecular Weight:77kDa
NCBI Full Name:synapsin-1 isoform Ia
NCBI Synonym Full Names:synapsin I
NCBI Official Symbol:SYN1  
NCBI Official Synonym Symbols:SYNI; MRX50; SYN1a; SYN1b  
NCBI Protein Information:synapsin-1
UniProt Protein Name:Synapsin-1
UniProt Synonym Protein Names:Brain protein 4.1; Synapsin I
Protein Family:Protein
UniProt Gene Name:SYN1  
UniProt Entry Name:SYN1_HUMAN
StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37°C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles.

Plasma: Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid: Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell Culture Supernatant: Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell Lysates: Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.
Tissue Homogenates: The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C.
Tissue Lysates: Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk: Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products