null

Rat S100B / S100 beta ELISA Kit (RTFI00206)

SKU:
RTFI00206
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P04631
Sensitivity:
37.5pg/ml
Range:
62.5-4000pg/ml
ELISA Type:
Sandwich
Synonyms:
S100B, Protein S100-B, S100, S100 beta, S100 calcium binding protein B, S100 calcium-binding protein B, S100 calcium-binding protein, beta, neural, S-100 calcium-binding protein, beta chain, 10, S-100 protein beta chain, S-100 protein subunit beta, S
Reactivity:
Rat
$779

Description

system_update_altDatasheetsystem_update_altMSDS

Rat S100B/S100 beta ELISA Kit

The Rat S100B (S100 Beta) ELISA Kit is specifically designed for the precise measurement of S100B levels in rat serum, plasma, and tissue lysates. This kit offers exceptional sensitivity and specificity, guaranteeing consistent and accurate results for various research purposes.S100B, also known as S100 beta, is a calcium-binding protein that is predominantly expressed in astrocytes in the central nervous system.

It serves as a biomarker for brain injury and neurodegenerative diseases, making it indispensable for understanding these conditions and exploring potential treatment options.By using the Rat S100B (S100 Beta) ELISA Kit, researchers can effectively analyze the levels of S100B in rat samples, paving the way for groundbreaking discoveries in neuroscience and neurology research.

Product Name:Rat S100B (S100 Calcium Binding Protein B) ELISA Kit
Product Code:RTFI00206
Size:96 Assays
Target:Rat S100B
Alias:S100B, Protein S100-B, S100, S100 beta, S100 calcium binding protein B, S100 calcium-binding protein B, S100 calcium-binding protein, beta, neural, S-100 calcium-binding protein, beta chain, 10, S-100 protein beta chain, S-100 protein subunit beta, S100beta
Reactivity:Rat
Detection Method:Sandwich ELISA, Double Antibody
Sensitivity:37.5pg/ml
Range:62.5-4000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Rat S100B and the recovery rates were calculated by comparing the measured value to the expected amount of Rat S100B in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)90-10297
EDTA plasma(n=5)88-9593
UFH plasma(n=5)85-10298
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat S100B and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)87-105%86-97%85-99%
EDTA plasma(n=5)90-101%90-101%84-100%
UFH plasma(n=5)81-99%83-96%88-99%
Intra-Assay:CV <8%
Inter-Assay:CV <10%
Uniprot:P04631
UniProt Protein Function:S100B: Weakly binds calcium but binds zinc very tightly- distinct binding sites with different affinities exist for both ions on each monomer. Physiological concentrations of potassium ion antagonize the binding of both divalent cations, especially affecting high-affinity calcium-binding sites. Binds to and initiates the activation of STK38 by releasing autoinhibitory intramolecular interactions within the kinase. Interaction with AGER after myocardial infarction may play a role in myocyte apoptosis by activating ERK1/2 and p53/TP53 signaling. Dimer of either two alpha chains, or two beta chains, or one alpha and one beta chain. The S100B dimer binds two molecules of STK38. Interacts with AGER. The S100B dimer interacts with two molecules of CAPZA1. Although predominant among the water-soluble brain proteins, S100 is also found in a variety of other tissues. Belongs to the S-101 family.
UniProt Protein Details:

Protein type:Calcium-binding

Cellular Component: cell soma; cytoplasm; extracellular space; intracellular membrane-bound organelle; nucleus; perinuclear region of cytoplasm; ruffle

Molecular Function:calcium ion binding; calcium-dependent protein binding; identical protein binding; protein binding; protein homodimerization activity; RAGE receptor binding; receptor binding; tau protein binding; zinc ion binding

Biological Process: astrocyte differentiation; learning and/or memory; memory; positive regulation of apoptosis; positive regulation of cell proliferation; positive regulation of I-kappaB kinase/NF-kappaB cascade; positive regulation of synaptic transmission; regulation of cell shape; regulation of neuronal synaptic plasticity; response to glucocorticoid stimulus; response to methylmercury

NCBI Summary:binds GTPase activating protein IQGAP1; may play a role in cell membrane rearrangement [RGD, Feb 2006]
UniProt Code:P04631
NCBI GenInfo Identifier:6981498
NCBI Gene ID:25742
NCBI Accession:NP_037323.1
UniProt Related Accession:P04631
Molecular Weight:10,744 Da
NCBI Full Name:protein S100-B
NCBI Synonym Full Names:S100 calcium binding protein B
NCBI Official Symbol:S100b  
NCBI Official Synonym Symbols:S100P  
NCBI Protein Information:protein S100-B
UniProt Protein Name:Protein S100-B
UniProt Synonym Protein Names:S-100 protein beta chain; S-100 protein subunit beta; S100 calcium-binding protein B
Protein Family:Protein
UniProt Gene Name:S100b  
UniProt Entry Name:S100B_RAT
StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37°C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles.

Plasma: Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid: Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell Culture Supernatant: Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell Lysates: Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.
Tissue Homogenates: The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C.
Tissue Lysates: Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk: Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products