null

Rat Plp1 / Myelin proteolipid protein ELISA Kit

SKU:
RTFI00188
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P60203
Sensitivity:
46.875pg/ml
Range:
78.125-5000pg/ml
ELISA Type:
Sandwich
Synonyms:
Plp1, Myelin proteolipid protein, PLP, Lipophilin
Reactivity:
Rat
$779
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Rat Plp1/Myelin proteolipid protein ELISA Kit

The Rat PLP1 (Myelin Proteolipid Protein) ELISA Kit is specifically designed for the quantitative measurement of PLP1 levels in rat samples, including serum, plasma, and cell culture supernatants. With its high sensitivity and specificity, this kit provides accurate and reproducible results, making it a valuable tool for researchers studying myelin-related disorders.PLP1 is a key component of myelin, the protective sheath surrounding nerve cells in the central nervous system. Abnormalities in PLP1 expression have been linked to conditions such as multiple sclerosis and leukodystrophies, highlighting the importance of accurate measurement of PLP1 levels in research settings.

By utilizing this ELISA kit, researchers can gain insights into the role of PLP1 in myelination and demyelinating diseases, paving the way for potential therapeutic interventions. Upgrade your research capabilities with the Rat PLP1 ELISA Kit and uncover new discoveries in the field of neuroscience and neurology.

Product Name:Rat Plp1 (Myelin proteolipid protein) ELISA Kit
Product Code:RTFI00188
Size:96 Assays
Target:Rat Plp1
Alias:Plp1, Myelin proteolipid protein, PLP, Lipophilin
Reactivity:Rat
Detection Method:Sandwich ELISA, Double Antibody
Sensitivity:46.875pg/ml
Range:78.125-5000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Rat Plp1 and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Plp1 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)86-10395
EDTA plasma(n=5)91-10296
UFH plasma(n=5)86-9691
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Plp1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)86-100%86-103%86-100%
EDTA plasma(n=5)83-96%84-99%85-101%
UFH plasma(n=5)82-97%83-93%83-95%
Intra-Assay:CV <8%
Inter-Assay:CV <10%
Uniprot:P60203
UniProt Protein Function:PLP1: This is the major myelin protein from the central nervous system. It plays an important role in the formation or maintenance of the multilamellar structure of myelin. Defects in PLP1 are the cause of leukodystrophy hypomyelinating type 1 (HLD1); also known as Pelizaeus-Merzbacher disease. HLD1 is an X-linked recessive dysmyelinating disorder of the central nervous system in which myelin is not formed properly. It is characterized clinically by nystagmus, spastic quadriplegia, ataxia, and developmental delay. Defects in PLP1 are the cause of spastic paraplegia X- linked type 2 (SPG2). SPG2 is characterized by spastic gait and hyperreflexia. In some patients, complicating features include nystagmus, dysarthria, sensory disturbance, mental retardation, optic atrophy. Belongs to the myelin proteolipid protein family. 2 isoforms of the human protein are produced by alternative splicing.
UniProt Protein Details:

Protein type:Membrane protein, multi-pass; Membrane protein, integral; Cell surface

Cellular Component: integral to plasma membrane; myelin sheath; plasma membrane

Molecular Function:structural constituent of myelin sheath; structural molecule activity

Biological Process: astrocyte development; axon ensheathment; cell maturation; glial cell differentiation; inflammatory response; integrin-mediated signaling pathway; long-chain fatty acid biosynthetic process; myelination; myelination in the central nervous system; substantia nigra development

UniProt Code:P60203
NCBI GenInfo Identifier:13591880
NCBI Gene ID:24943
NCBI Accession:NP_112252.1
UniProt Secondary Accession:P60203,P04400, P06905, Q561K5,
UniProt Related Accession:P60203
Molecular Weight:30,077 Da
NCBI Full Name:myelin proteolipid protein
NCBI Synonym Full Names:proteolipid protein 1
NCBI Official Symbol:Plp1  
NCBI Official Synonym Symbols:Plp  
NCBI Protein Information:myelin proteolipid protein
UniProt Protein Name:Myelin proteolipid protein
UniProt Synonym Protein Names:Lipophilin
Protein Family:Myelin proteolipid protein
UniProt Gene Name:Plp1  
UniProt Entry Name:MYPR_RAT
StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37°C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles.

Plasma: Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid: Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell Culture Supernatant: Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell Lysates: Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.
Tissue Homogenates: The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C.
Tissue Lysates: Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk: Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products