null

Rat Nephrin ELISA Kit

SKU:
RTFI00994
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q9R044
Sensitivity:
0.094ng/ml
Range:
0.156-10ng/ml
ELISA Type:
Sandwich
Synonyms:
NPHN, CNF, NPHS1, CNF, nephrosis 1, congenital, Finnish type, nephrin, NPHNCNF, NPHS1, Renal glomerulus-specific cell adhesion receptor
Reactivity:
Rat
Research Area:
Cell Biology
$779
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Rat Nephrin ELISA Kit

The Rat Nephrin ELISA Kit is specifically designed for the precise measurement of nephrin levels in rat serum, plasma, and cell culture supernatants. This kit offers exceptional sensitivity and specificity, guaranteeing accurate and consistent results for a variety of research purposes.Nephrin is a key protein found in the kidney's filtration barrier, playing a vital role in maintaining kidney function and preventing protein leakage into the urine. Changes in nephrin levels have been linked to various kidney diseases, including diabetic nephropathy and glomerulonephritis, making it an important marker for understanding and treating these conditions.

With its advanced technology and reliable performance, the Rat Nephrin ELISA Kit is an invaluable tool for researchers studying renal function, kidney diseases, and potential therapeutic interventions. Trust in this kit to deliver precise and dependable results for your experimental needs.

Product Name:Rat NPHN (Nephrin) ELISA Kit
Product Code:RTFI00994
Size:96 Assays
Target:Rat NPHN
Alias:NPHN, CNF, NPHS1, CNF, nephrosis 1, congenital, Finnish type, nephrin, NPHNCNF, NPHS1, Renal glomerulus-specific cell adhesion receptor
Reactivity:Rat
Detection Method:Sandwich ELISA, Double Antibody
Sensitivity:0.094ng/ml
Range:0.156-10ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Rat NPHN and the recovery rates were calculated by comparing the measured value to the expected amount of Rat NPHN in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)88-10595
EDTA plasma(n=5)92-10095
UFH plasma(n=5)85-10295
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat NPHN and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)88-105%91-104%85-100%
EDTA plasma(n=5)85-100%86-100%85-98%
UFH plasma(n=5)80-96%83-98%80-100%
Intra-Assay:CV <8%
Inter-Assay:CV <10%
Uniprot:Q9R044
UniProt Protein Function:NPHS1: Seems to play a role in the development or function of the kidney glomerular filtration barrier. Regulates glomerular vascular permeability. May anchor the podocyte slit diaphragm to the actin cytoskeleton. Plays a role in skeletal muscle formation through regulation of myoblast fusion. Interacts with CD2AP (via C-terminal domain). Interacts with MAGI1 (via PDZ 2 and 3 domains) forming a tripartite complex with IGSF5/JAM4. Interacts with DDN; the interaction is direct. Self-associates (via the Ig-like domains). Also interacts (via the Ig-like domains) with KIRREL/NEPH1 and KIRREL2; the interaction with KIRREL is dependent on KIRREL glycosylation. Forms a complex with ACTN4, CASK, IQGAP1, MAGI2, SPTAN1 and SPTBN1. Interacts with NPHS2. Specifically expressed in podocytes of kidney glomeruli. Belongs to the immunoglobulin superfamily. 2 isoforms of the human protein are produced by alternative splicing.
UniProt Protein Details:

Protein type:Cell adhesion; Immunoglobulin superfamily; Membrane protein, integral

Chromosomal Location of Human Ortholog: 1q21

Cellular Component: cell projection; lipid raft; membrane; plasma membrane; protein complex

Molecular Function:alpha-actinin binding; myosin binding; protein binding; protein domain specific binding; spectrin binding

Biological Process: cell adhesion; glomerular basement membrane development; glomerular filtration; JNK cascade; MAPKKK cascade; myoblast fusion; positive regulation of actin filament polymerization; skeletal muscle development

NCBI Summary:renal protein localized specifically to glomerular capillary walls; may contribute to the development of proteinuria in renal disease [RGD, Feb 2006]
UniProt Code:Q9R044
NCBI GenInfo Identifier:12018318
NCBI Gene ID:64563
NCBI Accession:NP_072150.1
UniProt Secondary Accession:Q9R044,Q9JIX2, Q9QXX7,
UniProt Related Accession:Q9R044
Molecular Weight:126,646 Da
NCBI Full Name:nephrin
NCBI Synonym Full Names:NPHS1 nephrin
NCBI Official Symbol:Nphs1  
NCBI Protein Information:nephrin
UniProt Protein Name:Nephrin
UniProt Synonym Protein Names:Renal glomerulus-specific cell adhesion receptor
UniProt Gene Name:Nphs1  
StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37°C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles.

Plasma: Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid: Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell Culture Supernatant: Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell Lysates: Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.
Tissue Homogenates: The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C.
Tissue Lysates: Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk: Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products