null

Rat MyD88 (myeloid differentiation factor 88) ELISA Kit (RTFI01303)

SKU:
RTFI01303
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q6Y1S1
Sensitivity:
46.875pg/ml
Range:
78.125-5000pg/ml
ELISA Type:
Sandwich
Synonyms:
MYD88, MYD88D
Reactivity:
Rat
Research Area:
Immunology
3 Citations
img:cited-250-x-100-px-125-x-75-px-.png
€599

Description

system_update_altDatasheetsystem_update_altMSDS

Rat MyD88 (myeloid differentiation factor 88) ELISA Kit

The Rat MyD88 (Myeloid Differentiation Factor 88) ELISA Kit is a powerful tool for the precise measurement of MyD88 levels in rat serum, plasma, and tissue culture supernatants. This advanced kit boasts exceptional sensitivity and specificity, ensuring consistent and dependable results for a variety of research purposes.MyD88 is a key signaling protein that plays a vital role in the immune response, particularly in the activation of inflammatory pathways and the defense against infections. Dysregulation of MyD88 has been implicated in various inflammatory disorders, autoimmune diseases, and cancer, making it a critical target for investigation and potential therapeutic interventions.

This state-of-the-art ELISA kit provides researchers with a valuable tool for studying MyD88 and its involvement in various pathological processes, offering insights that could lead to the development of novel treatment strategies. Trust in the Rat MyD88 ELISA Kit for precise and reliable detection of MyD88 levels in rat samples, advancing your research in immunology, inflammation, and beyond.

Product Name:Rat MyD88 (myeloid differentiation factor 88) ELISA Kit
Product Code:RTFI01303
Size:96 Assays
Target:Rat MyD88
Alias:MYD88, MYD88D
Reactivity:Rat
Detection Method:Sandwich ELISA, Double Antibody
Sensitivity:46.875pg/ml
Range:78.125-5000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Rat MyD88 and the recovery rates were calculated by comparing the measured value to the expected amount of Rat MyD88 in samples. Please contact us for more information.
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat MyD88 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. Please get in contact for more information.
Intra-Assay:CV <8%
Inter-Assay:CV <10%
Uniprot:Q6Y1S1
UniProt Protein Function:Adapter protein involved in the Toll-like receptor and IL-1 receptor signaling pathway in the innate immune response. Acts via IRAK1, IRAK2, IRF7 and TRAF6, leading to NF-kappa-B activation, cytokine secretion and the inflammatory response. Increases IL-8 transcription. Involved in IL-18-mediated signaling pathway. Activates IRF1 resulting in its rapid migration into the nucleus to mediate an efficient induction of IFN-beta, NOS2/INOS, and IL12A genes. MyD88-mediated signaling in intestinal epithelial cells is crucial for maintenance of gut homeostasis and controls the expression of the antimicrobial lectin REG3G in the small intestine.
NCBI Summary:an adaptor protein which binds toll-like receptors and links them to other downstream signalling molecules [RGD, Feb 2006]
UniProt Code:Q6Y1S1
NCBI GenInfo Identifier:292630833
NCBI Gene ID:301059
NCBI Accession:Q6Y1S1.2
UniProt Secondary Accession:Q6Y1S1,Q4QRC0,
UniProt Related Accession:Q6Y1S1
Molecular Weight:33,856 Da
NCBI Full Name:Myeloid differentiation primary response protein MyD88
NCBI Synonym Full Names:myeloid differentiation primary response 88
NCBI Official Symbol:Myd88  
NCBI Protein Information:myeloid differentiation primary response protein MyD88
UniProt Protein Name:Myeloid differentiation primary response protein MyD88
Protein Family:Myeloid differentiation primary response protein
UniProt Gene Name:Myd88  
StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37°C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles.

Plasma: Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 - g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid: Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell Culture Supernatant: Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell Lysates: Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.
Tissue Homogenates: The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C.
Tissue Lysates: Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk: Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.
Abdel-Aziz et al.TLR4/ MyD88/NF-κB signaling pathway involved in the protective effect of diacerein against lung fibrosis in ratsHuman & Experimental Toxicology 2023PubMed ID: 37664986
Dalia Mohamed Ali et al.Diacerein modulates TLR4/ NF-κB/IL-1β and TRPC1/CHOP signalling pathways in gentamicin-induced parotid toxicity in ratsJournal of cellular and molecular medicine 2023PubMed ID: 37257043
Walaa Yehia Abdelzaher et al.Rivaroxaban Modulates TLR4/Myd88/NF-Kβ Signaling Pathway in a Dose-Dependent Manner With Suppression of Oxidative Stress and Inflammation in an Experimental Model of DepressionFrontiers in Pharmacology 2021PubMed ID: 34630092

Related Products