null

Rat LRP2 ELISA Kit

SKU:
RTFI00123
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P98158
Sensitivity:
9.375pg/ml
Range:
15.625-1000pg/ml
ELISA Type:
Sandwich
Synonyms:
Lrp2, gp330, Megalin, LRP-2, Glycoprotein 330
Reactivity:
Rat
Research Area:
Cell Biology
$779
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Rat LRP2 ELISA Kit

The Rat LRP2 (Low-Density Lipoprotein Receptor-Related Protein 2) ELISA Kit is specifically designed for the precise quantification of LRP2 levels in rat serum, plasma, and tissue homogenates. This kit offers exceptional sensitivity and specificity, ensuring reliable and consistent results for a variety of experimental applications.LRP2 is a key receptor involved in the clearance of lipoprotein particles, playing a critical role in lipid metabolism and cardiovascular health. Dysregulation of LRP2 has been linked to conditions such as hypercholesterolemia and atherosclerosis, highlighting its importance as a potential therapeutic target or biomarker for cardiovascular diseases.

The Rat LRP2 ELISA Kit provides researchers with a valuable tool for investigating the role of LRP2 in disease pathogenesis and exploring its potential as a target for novel therapeutic interventions. With its high-quality components and user-friendly protocol, this kit is a reliable choice for studying LRP2 biology in rat models.

Product Name:Rat Lrp2 (Low-density lipoprotein receptor-related protein 2) ELISA Kit
Product Code:RTFI00123
Size:96 Assays
Target:Rat Lrp2
Alias:Lrp2, gp330, Megalin, LRP-2, Glycoprotein 330
Reactivity:Rat
Detection Method:Sandwich ELISA, Double Antibody
Sensitivity:9.375pg/ml
Range:15.625-1000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Rat Lrp2 and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Lrp2 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)86-10093
EDTA plasma(n=5)86-9893
UFH plasma(n=5)86-10295
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Lrp2 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)86-92%85-103%88-105%
EDTA plasma(n=5)82-100%85-96%83-99%
UFH plasma(n=5)81-94%82-97%80-96%
Intra-Assay:CV <8%
Inter-Assay:CV <10%
Uniprot:P98158
UniProt Protein Function:LRP2: Acts together with cubilin to mediate HDL endocytosis. May participate in regulation of parathyroid- hormone and para-thyroid-hormone-related protein release. Defects in LRP2 are the cause of Donnai-Barrow syndrome (DBS); also known as faciooculoacousticorenal syndrome (FOAR syndrome). DBS is a rare autosomal recessive disorder characterized by major malformations including agenesis of the corpus callosum, congenital diaphragmatic hernia, facial dysmorphology, ocular anomalies, sensorineural hearing loss and developmental delay. The FOAR syndrome was first described as comprising facial anomalies, ocular anomalies, sensorineural hearing loss, and proteinuria. DBS and FOAR were first described as distinct disorders but the classic distinguishing features between the 2 disorders were presence of proteinuria and absence of diaphragmatic hernia and corpus callosum anomalies in FOAR. Early reports noted that the 2 disorders shared many phenotypic features and may be identical. Although there is variability in the expression of some features (e.g. agenesis of the corpus callosum and proteinuria), DBS and FOAR are now considered to represent the same entity. Belongs to the LDLR family.
UniProt Protein Details:

Protein type:Membrane protein, integral; Receptor, misc.; Motility/polarity/chemotaxis

Cellular Component: apical part of cell; apical plasma membrane; brush border; brush border membrane; coated pit; cytoplasm; endocytic vesicle; endoplasmic reticulum; endosome; extracellular space; Golgi apparatus; integral to membrane; lipid raft; lysosomal membrane; membrane; protein complex; receptor complex

Molecular Function:calcium ion binding; hemoglobin binding; hormone binding; lipoprotein transporter activity; low-density lipoprotein receptor binding; PDZ domain binding; protein binding; protein complex binding; receptor activity; SH3 domain binding

Biological Process: aging; cell proliferation; endosome transport; forebrain development; heart development; hemoglobin import; hormone secretion; lipoprotein transport; organ regeneration; receptor-mediated endocytosis; response to drug; response to retinoic acid; response to vitamin D; response to X-ray; transcytosis; vitamin metabolic process

NCBI Summary:receptor for low density lipoprotein and a major kidney glomerular antigen for rat Heymann nephritis [RGD, Feb 2006]
UniProt Code:P98158
NCBI GenInfo Identifier:13562118
NCBI Gene ID:29216
NCBI Accession:NP_110454.1
UniProt Related Accession:P98158
Molecular Weight:519,276 Da
NCBI Full Name:low-density lipoprotein receptor-related protein 2
NCBI Synonym Full Names:LDL receptor related protein 2
NCBI Official Symbol:Lrp2  
NCBI Protein Information:low-density lipoprotein receptor-related protein 2
UniProt Protein Name:Low-density lipoprotein receptor-related protein 2
UniProt Synonym Protein Names:Glycoprotein 330; gp330; Megalin
Protein Family:Low-density lipoprotein receptor-related protein
UniProt Gene Name:Lrp2  
UniProt Entry Name:LRP2_RAT
StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37°C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles.

Plasma: Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid: Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell Culture Supernatant: Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell Lysates: Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.
Tissue Homogenates: The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C.
Tissue Lysates: Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk: Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products