Rat GOT2/Aspartate aminotransferase ELISA Kit

Product Name:	Rat Got2 (Aspartate aminotransferase, mitochondrial) ELISA Kit
Product Code:	RTFI00416
Size:	96 Assays
Target:	Rat Got2
Alias:	Got2, Aspartate aminotransferase, mitochondrial, mAspAT, Kynurenine--oxoglutaRate transaminase IV, Kynurenine--oxoglutaRate transaminase 4, Transaminase A, Plasma membrane-associated fatty acid-binding protein, FABPpm, Transaminase A, Plasma membrane-associated fatty acid-binding protein, FABPpm, Fatty acid-binding protein, FABP-1, Glutamate oxaloacetate transaminase 2, KAT4, KATIV, mitAAT
Reactivity:	Rat
Detection Method:	Sandwich ELISA, Double Antibody
Sensitivity:	0.469ng/ml
Range:	0.781-50ng/ml
Storage:	4°C for 6 months
Note:	For Research Use Only

Recovery:

Matrices listed below were spiked with certain level of Rat Got2 and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Got2 in samples.

Matrix	Recovery range(%)	Average(%)
serum(n=5)	90-102	95
EDTA plasma(n=5)	87-105	95
UFH plasma(n=5)	86-101	93

Linearity:

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Got2 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample	1:2	1:4	1:8
serum(n=5)	88-99%	85-101%	89-98%
EDTA plasma(n=5)	82-95%	83-99%	89-101%
UFH plasma(n=5)	83-100%	81-98%	88-100%

Intra-Assay:

CV <8%

Inter-Assay:

CV <10%

Uniprot:

P00507

UniProt Protein Function:	GOT2: Catalyzes the irreversible transamination of the L- tryptophan metabolite L-kynurenine to form kynurenic acid (KA). Plays a key role in amino acid metabolism. Important for metabolite exchange between mitochondria and cytosol. Facilitates cellular uptake of long-chain free fatty acids. Belongs to the class-I pyridoxal-phosphate-dependent aminotransferase family.
UniProt Protein Details:	Protein type:Amino Acid Metabolism - phenylalanine, tyrosine and tryptophan biosynthesis; Amino Acid Metabolism - tyrosine; Mitochondrial; Amino Acid Metabolism - phenylalanine; Transferase; Amino Acid Metabolism - arginine and proline; Amino Acid Metabolism - alanine, aspartate and glutamate; EC 2.6.1.1; EC 2.6.1.7; Amino Acid Metabolism - cysteine and methionine Cellular Component: cell surface; mitochondrial inner membrane; mitochondrial matrix; mitochondrion; myelin sheath; perikaryon; plasma membrane; protein complex Molecular Function:amino acid binding; aspartate transaminase activity; carboxylic acid binding; enzyme binding; kynurenine-oxoglutarate transaminase activity; phospholipid binding; protein homodimerization activity; pyridoxal phosphate binding Biological Process: 2-oxoglutarate metabolic process; amino acid metabolic process; aspartate biosynthetic process; aspartate catabolic process; aspartate metabolic process; dicarboxylic acid metabolic process; fatty acid transport; glutamate catabolic process to 2-oxoglutarate; glutamate catabolic process to aspartate; glutamate metabolic process; oxaloacetate metabolic process; response to ethanol
NCBI Summary:	mitochondrial aspartate aminotransferase isozyme [RGD, Feb 2006]
UniProt Code:	P00507
NCBI GenInfo Identifier:	6980972
NCBI Gene ID:	25721
NCBI Accession:	NP_037309.1
UniProt Secondary Accession:	P00507,Q64551, Q9QV50,
UniProt Related Accession:	P00507
Molecular Weight:	47,314 Da
NCBI Full Name:	aspartate aminotransferase, mitochondrial
NCBI Synonym Full Names:	glutamic-oxaloacetic transaminase 2
NCBI Official Symbol:	Got2
NCBI Official Synonym Symbols:	ASPATA
NCBI Protein Information:	aspartate aminotransferase, mitochondrial
UniProt Protein Name:	Aspartate aminotransferase, mitochondrial
UniProt Synonym Protein Names:	Fatty acid-binding protein; FABP-1; Glutamate oxaloacetate transaminase 2; Kynurenine aminotransferase 4; Kynurenine aminotransferase IV; Kynurenine--oxoglutarate transaminase 4; Kynurenine--oxoglutarate transaminase IV; Plasma membrane-associated fatty acid-binding protein; FABPpm; Transaminase A
UniProt Gene Name:	Got2
UniProt Entry Name:	AATM_RAT

Step	Procedure
1.	Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.	Aliquot 0.1ml standard solutions into the standard wells.
3.	Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.	Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.	Seal the plate with a cover and incubate at 37°C for 90 min.
6.	Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.	Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.	Seal the plate with a cover and incubate at 37°C for 60 min.
9.	Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.	Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.	Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.	Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.	Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14.	Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum:	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles.
Plasma:	Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid:	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell Culture Supernatant:	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell Lysates:	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.
Tissue Homogenates:	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C.
Tissue Lysates:	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk:	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Rat GOT2 / Aspartate aminotransferase ELISA Kit (RTFI00416)

Description