null

Rat CRF2R / Corticotropin Releasing Factor Receptor 2 ELISA Kit

SKU:
RTFI00157
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P47866
Sensitivity:
0.188ng/ml
Range:
0.313-20ng/ml
ELISA Type:
Sandwich
Synonyms:
Crhr2, Corticotropin-releasing hormone receptor 2, CRH-R-2, CRH-R2,
Reactivity:
Rat
€649
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Rat CRF2R/Corticotropin Releasing Factor Receptor 2 ELISA Kit

The Rat CRF2R (Corticotropin-Releasing Factor Receptor 2) ELISA Kit is specifically designed for the precise and sensitive detection of CRF2R levels in rat serum, plasma, and cell culture supernatants. This kit offers high accuracy and reproducibility, making it an excellent tool for a variety of research applications.CRF2R plays a critical role in mediating the physiological stress response and is involved in various behavioral and neuroendocrine functions.

Dysregulation of CRF2R has been linked to various stress-related disorders, including anxiety and depression. Therefore, accurate measurement of CRF2R levels is essential for understanding its role in these conditions and potential therapeutic interventions.With its high sensitivity and specificity, the Rat CRF2R ELISA Kit from AssayGenie provides researchers with a reliable and precise tool for studying the function and regulation of CRF2R in rat models.

Product Name:Rat Crhr2 (Corticotropin-releasing factor receptor 2) ELISA Kit
Product Code:RTFI00157
Size:96 Assays
Target:Rat Crhr2
Alias:Crhr2, Corticotropin-releasing hormone receptor 2, CRH-R-2, CRH-R2
Reactivity:Rat
Detection Method:Sandwich ELISA, Double Antibody
Sensitivity:0.188ng/ml
Range:0.313-20ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Rat Crhr2 and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Crhr2 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)89-10596
EDTA plasma(n=5)90-10096
UFH plasma(n=5)88-10597
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Crhr2 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)90-99%86-99%86-103%
EDTA plasma(n=5)83-99%83-98%85-101%
UFH plasma(n=5)80-92%88-96%80-99%
Intra-Assay:CV <8%
Inter-Assay:CV <10%
Uniprot:P47866
UniProt Protein Function:CRHR2: This is a receptor for corticotropin releasing factor. Shows high-affinity CRF binding. Also binds to urocortin I, II and III. The activity of this receptor is mediated by G proteins which activate adenylyl cyclase. Belongs to the G-protein coupled receptor 2 family. 3 isoforms of the human protein are produced by alternative splicing.
UniProt Protein Details:

Protein type:Membrane protein, multi-pass; Membrane protein, integral; Receptor, GPCR; GPCR, family 2

Chromosomal Location of Human Ortholog: 7p14.3

Cellular Component: Golgi apparatus; cell surface; integral to plasma membrane; endoplasmic reticulum; plasma membrane

Molecular Function:protein binding; hormone activity; corticotrophin-releasing factor receptor activity

Biological Process: G-protein signaling, coupled to cAMP nucleotide second messenger; negative regulation of angiogenesis

NCBI Summary:The protein encoded by this gene belongs to the G-protein coupled receptor 2 family, and the subfamily of corticotropin releasing hormone receptor. This receptor shows high affinity for corticotropin releasing hormone (CRH), and also binds CRH-related peptides such as urocortin. CRH is synthesized in the hypothalamus, and plays an important role in coordinating the endocrine, autonomic, and behavioral responses to stress and immune challenge. Studies in mice suggest that this receptor maybe involved in mediating cardiovascular homeostasis. Alternatively spliced transcript variants encoding different isoforms have been described for this gene.[provided by RefSeq, Jan 2011]
UniProt Code:P47866
NCBI GenInfo Identifier:321117173
NCBI Gene ID:1395
NCBI Accession:NP_001189404.1
UniProt Secondary Accession:P47866,Q60748, P47866,
UniProt Related Accession:Q13324
Molecular Weight:47,688 Da
NCBI Full Name:corticotropin-releasing factor receptor 2 isoform 2
NCBI Synonym Full Names:corticotropin releasing hormone receptor 2
NCBI Official Symbol:CRHR2  
NCBI Official Synonym Symbols:CRF2; CRFR2; CRF-RB; HM-CRF  
NCBI Protein Information:corticotropin-releasing factor receptor 2; CRH-R2; CRF2 receptor, beta isoform
UniProt Protein Name:Corticotropin-releasing factor receptor 2
UniProt Synonym Protein Names:Corticotropin-releasing hormone receptor 2
Protein Family:Corticotropin-releasing factor receptor
UniProt Gene Name:CRHR2  
UniProt Entry Name:CRFR2_HUMAN
StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37°C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles.

Plasma: Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid: Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell Culture Supernatant: Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell Lysates: Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.
Tissue Homogenates: The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C.
Tissue Lysates: Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk: Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products