null

Rat Cardiac phospholamban (Pln) ELISA Kit (RTEB1251)

SKU:
RTEB1251
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P61016
ELISA Type:
Sandwich
Reactivity:
Rat
€649
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Rat Cardiac phospholamban (Pln) ELISA Kit

The Rat Cardiac Phospholamban (PLN) ELISA Kit is a powerful tool for the precise measurement of phospholamban levels in rat cardiac tissue samples. This kit offers exceptional sensitivity and specificity, guaranteeing accurate and consistent results for various research purposes.Phospholamban is a key regulator of calcium uptake and release in cardiac muscle cells, playing a critical role in the contraction and relaxation of the heart. Dysregulation of phospholamban has been implicated in various cardiac conditions, including heart failure and arrhythmias, making it a valuable biomarker for studying these diseases and exploring potential therapeutic interventions.

With the Rat Cardiac Phospholamban (PLN) ELISA Kit, researchers can confidently analyze phospholamban levels in rat cardiac samples, providing valuable insights into cardiac function and potential therapeutic targets for cardiovascular disorders. Trust in this kit for reliable and accurate results in your cardiac research endeavors.

Product Name:Rat Cardiac phospholamban (Pln) ELISA Kit
SKU:RTEB1251
Size:96T
Target:Rat Cardiac phospholamban (Pln)
Synonyms:PLB
Assay Type:Sandwich
Detection Method:ELISA
Reactivity:Rat
Detection Range:0.156-10ng/mL
Sensitivity:0.059ng/mL
Intra CV:Provided with the Kit
Inter CV:Provided with the Kit
Linearity:Provided with the Kit
Recovery:Provided with the Kit
Function:Reversibly inhibits the activity of ATP2A2 in cardiac sarcoplasmic reticulum by decreasing the apparent affinity of the ATPase for Ca(2+). Modulates the contractility of the heart muscle in response to physiological stimuli via its effects on ATP2A2. Modulates calcium re-uptake during muscle relaxation and plays an important role in calcium homeostasis in the heart muscle. The degree of ATP2A2 inhibition depends on the oligomeric state of PLN. ATP2A2 inhibition is alleviated by PLN phosphorylation.
Uniprot:P61016
Sample Type:Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids
Specificity:Natural and recombinant rat Cardiac phospholamban
Sub Unit:Homopentamer. Interacts with HAX1 and ATP2A2.
Subcellular Location:Endoplasmic reticulum membrane Single-pass membrane protein Sarcoplasmic reticulum membrane Single-pass membrane protein Mitochondrion membrane Single-pass membrane protein Membrane Single-pass membrane protein Colocalizes with HAX1 at the endoplasmic reticulum. Colocalizes with DMPK a the sarcoplasmic reticulum.
Storage:Please see kit components below for exact storage details
Note:For research use only
UniProt Protein Function:PLB: a heart protein postulated to regulate the activity of the calcium pump of cardiac sarcoplasmic reticulum. A major substrate for the cAMP-dependent protein kinase. An inhibitor of cardiac muscle sarcoplasmic reticulum Ca(2+)-ATPase in the unphosphorylated state, but inhibition is relieved upon phosphorylation. The subsequent activation of the Ca(2+) pump leads to enhanced muscle relaxation rates, thereby contributing to the inotropic response elicited in heart by beta-agonists. A key regulator of cardiac diastolic function. Mutations are a cause of inherited human dilated cardiomyopathy with refractory congestive heart failure.Protein type: Membrane protein, integral; InhibitorChromosomal Location of Human Ortholog: 6q22.1Cellular Component: endoplasmic reticulum; membrane; mitochondrion; perinuclear region of cytoplasm; sarcoplasmic reticulum membraneMolecular Function: ATPase binding; ATPase inhibitor activity; enzyme inhibitor activity; identical protein binding; protein bindingBiological Process: cytosolic calcium ion homeostasis; negative regulation of ATPase activity; negative regulation of calcium ion transport; negative regulation of catalytic activity; negative regulation of heart rate; regulation of calcium ion transport; regulation of heart contraction; regulation of the force of heart contractionDisease: Cardiomyopathy, Dilated, 1p; Cardiomyopathy, Familial Hypertrophic, 18
UniProt Protein Details:
NCBI Summary:The protein encoded by this gene is found as a pentamer and is a major substrate for the cAMP-dependent protein kinase in cardiac muscle. The encoded protein is an inhibitor of cardiac muscle sarcoplasmic reticulum Ca(2+)-ATPase in the unphosphorylated state, but inhibition is relieved upon phosphorylation of the protein. The subsequent activation of the Ca(2+) pump leads to enhanced muscle relaxation rates, thereby contributing to the inotropic response elicited in heart by beta-agonists. The encoded protein is a key regulator of cardiac diastolic function. Mutations in this gene are a cause of inherited human dilated cardiomyopathy with refractory congestive heart failure, and also familial hypertrophic cardiomyopathy. [provided by RefSeq, Apr 2016]
UniProt Code:P61016
NCBI GenInfo Identifier:130774
NCBI Gene ID:5350
NCBI Accession:P26678.1
UniProt Secondary Accession:P61016,P61016, P61015, P61013, P61014, A4IFH6
UniProt Related Accession:P61016,P26678
Molecular Weight:6,109 Da
NCBI Full Name:Cardiac phospholamban
NCBI Synonym Full Names:phospholamban
NCBI Official Symbol:PLN
NCBI Official Synonym Symbols:PLB; CMD1P; CMH18
NCBI Protein Information:cardiac phospholamban
UniProt Protein Name:Cardiac phospholamban
UniProt Synonym Protein Names:
Protein Family:Cardiac phospholamban
UniProt Gene Name:PLN
UniProt Entry Name:PPLA_HUMAN
Component Quantity (96 Assays) Storage
ELISA Microplate (Dismountable) 8×12 strips -20°C
Lyophilized Standard 2 -20°C
Sample Diluent 20ml -20°C
Assay Diluent A 10mL -20°C
Assay Diluent B 10mL -20°C
Detection Reagent A 120µL -20°C
Detection Reagent B 120µL -20°C
Wash Buffer 30mL 4°C
Substrate 10mL 4°C
Stop Solution 10mL 4°C
Plate Sealer 5 -

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir

*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.

Step
1. Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C.
2. Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform.
3. Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper.
4. Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C.
5. Repeat the wash process for five times as conducted in step 3.
6. Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction.
7. Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
8. Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters.
9. After experiment, store all reagents according to the specified storage temperature respectively until their expiry.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products