Rat AVPR V1a / Vasopressin V1a receptor ELISA Kit
- SKU:
- RTFI00534
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P30560
- Sensitivity:
- 28.125pg/ml
- Range:
- 46.875-3000pg/ml
- ELISA Type:
- Sandwich
- Synonyms:
- Avpr1a, AVPR V1a, V1aR, Antidiuretic hormone receptor 1a, arginine vasopressin receptor 1A, AVPR V1a, AVPR1, SCCL vasopressin subtype 1a receptor, V1a vasopressin receptor, V1aR, V1-vascular vasopressin receptor AVPR1A, Vascular, hepatic-type arginin
- Reactivity:
- Rat
Description
Rat AVPR V1a/Vasopressin V1a receptor ELISA Kit
The Rat AVPR V1A (Vasopressin V1A Receptor) ELISA Kit is specially designed for the precise measurement of vasopressin V1A receptor levels in rat serum, plasma, and tissue homogenates. This kit offers exceptional sensitivity and specificity, ensuring accurate and consistent results that are perfect for a variety of research applications.The vasopressin V1A receptor is a key protein involved in the regulation of vascular tone, blood pressure, and stress response in the body.
Dysregulation of this receptor has been linked to various health conditions, including hypertension, heart failure, and anxiety disorders. By accurately measuring vasopressin V1A receptor levels, researchers can gain valuable insights into these conditions and potentially develop targeted therapies for them.
| Product Name: | Rat Avpr1a (Vasopressin V1a receptor) ELISA Kit |
| Product Code: | RTFI00534 |
| Size: | 96 Assays |
| Target: | Rat Avpr1a |
| Alias: | Avpr1a, AVPR V1a, V1aR, Antidiuretic hormone receptor 1a, arginine vasopressin receptor 1A, AVPR V1a, AVPR1, SCCL vasopressin subtype 1a receptor, V1a vasopressin receptor, V1aR, V1-vascular vasopressin receptor AVPR1A, Vascular, hepatic-type arginine vasopressin receptor |
| Reactivity: | Rat |
| Detection Method: | Sandwich ELISA, Double Antibody |
| Sensitivity: | 28.125pg/ml |
| Range: | 46.875-3000pg/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Rat Avpr1a and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Avpr1a in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Avpr1a and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| Intra-Assay: | CV <8% | ||||||||||||||||
| Inter-Assay: | CV <10% |
| Uniprot: | P30560 |
| UniProt Protein Function: | AVPR1A: Receptor for arginine vasopressin. The activity of this receptor is mediated by G proteins which activate a phosphatidyl- inositol-calcium second messenger system. Has been involved in social behaviors, including affiliation and attachment. Belongs to the G-protein coupled receptor 1 family. Vasopressin/oxytocin receptor subfamily. |
| UniProt Protein Details: | Protein type:Receptor, GPCR; Membrane protein, integral; Membrane protein, multi-pass; GPCR, family 1 Cellular Component: cytoplasmic vesicle membrane; integral to plasma membrane; integral to membrane; plasma membrane; cytoplasmic vesicle Molecular Function:V1A vasopressin receptor binding; peptide hormone binding; vasopressin receptor activity Biological Process: positive regulation of glutamate secretion; positive regulation of cellular pH reduction; positive regulation of systemic arterial blood pressure; cellular response to water deprivation; positive regulation of glycogen catabolic process; response to organic substance; elevation of cytosolic calcium ion concentration; positive regulation of cell proliferation; response to corticosterone stimulus; penile erection; positive regulation of prostaglandin biosynthetic process; grooming behavior; response to inorganic substance; maternal behavior; calcium-mediated signaling; myotube differentiation; positive regulation of heart rate; social behavior; positive regulation of cell growth; cellular response to hormone stimulus; negative regulation of female receptivity; G-protein coupled receptor protein signaling pathway; telencephalon development; regulation of systemic arterial blood pressure by vasopressin; negative regulation of transmission of nerve impulse; regulation of adrenocorticotropin hormone secretion; positive regulation of vasoconstriction; sperm ejaculation; positive regulation of blood pressure |
| NCBI Summary: | This gene encodes a receptor for arginine vasopressin, a neurohypophyseal hormone involved in diuresis inhibition, smooth muscle contraction, liver glycogenolysis stimulation and regulation of adrenocorticotropic hormone release from the pituitary. This receptor represents one of three G protein-coupled arginine vasopressin receptors which functions through a phosphotidylinositol-calcium second messenger system in vascular and hepatic tissues. [provided by RefSeq, Jul 2008] |
| UniProt Code: | P30560 |
| NCBI GenInfo Identifier: | 108935913 |
| NCBI Gene ID: | 25107 |
| NCBI Accession: | P30560.4 |
| UniProt Secondary Accession: | P30560,Q5M8D1, Q62874, Q9QW18, |
| UniProt Related Accession: | P30560 |
| Molecular Weight: | 47,655 Da |
| NCBI Full Name: | Vasopressin V1a receptor |
| NCBI Synonym Full Names: | arginine vasopressin receptor 1A |
| NCBI Official Symbol: | Avpr1a  |
| NCBI Official Synonym Symbols: | V1a; AVPR; V1aRÂ Â |
| NCBI Protein Information: | vasopressin V1a receptor; antidiuretic hormone receptor 1a; arginine vasopressin receptor V1a; vascular/hepatic-type arginine vasopressin receptor |
| UniProt Protein Name: | Vasopressin V1a receptor |
| UniProt Synonym Protein Names: | AVPR V1a; Antidiuretic hormone receptor 1a; Vascular/hepatic-type arginine vasopressin receptor |
| Protein Family: | Vasopressin V1a receptor |
| UniProt Gene Name: | Avpr1a  |
| UniProt Entry Name: | V1AR_RAT |
| Step | Procedure |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37°C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum: | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles. |
| Plasma: | Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid: | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell Culture Supernatant: | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell Lysates: | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C. |
| Tissue Homogenates: | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C. |
| Tissue Lysates: | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk: | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human AVPR V1a / Vasopressin V1a receptor ELISA Kit
Mouse Vasopressin V1a receptor (Avpr1a) ELISA Kit (MOEB2362)
Human Vasopressin V1a receptor (AVPR1A) ELISA Kit (HUEB2614)
Rat AVPR1b / Vasopressin V1b receptor ELISA Kit
Rat Vasopressin Vla Receptor (AVPR1A) ELISA Kit
