Rat ARNT2 ELISA Kit
- SKU:
- RTFI00578
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- Q78E60
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- ARNT2, Aryl hydrocarbon receptor nuclear translocator 2, ARNT protein 2
- Reactivity:
- Rat
- Research Area:
- Epigenetics and Nuclear Signaling
Description
Rat ARNT2 ELISA Kit
The Rat ARNT2 (Aryl Hydrocarbon Receptor Nuclear Translocator 2) ELISA Kit is a cutting-edge tool designed for the accurate quantification of ARNT2 levels in rat samples, including serum, plasma, and tissue homogenates. With its exceptional sensitivity and specificity, this kit provides precise and reliable results, making it an indispensable asset for various research applications.ARNT2 is a key transcription factor that plays a crucial role in regulating gene expression and mediating various biological processes, including cellular metabolism, differentiation, and response to environmental stimuli.
Dysregulation of ARNT2 has been linked to a variety of diseases, such as cancer, neurodevelopmental disorders, and metabolic syndromes, highlighting the importance of studying ARNT2 levels in different biological contexts.By utilizing the Rat ARNT2 ELISA Kit, researchers can gain valuable insights into the role of ARNT2 in health and disease, opening up new avenues for therapeutic interventions and drug discovery. Don't miss out on this opportunity to elevate your research with the advanced capabilities of the Rat ARNT2 ELISA Kit from Assay Genie.
| Product Name: | Rat ARNT2 (Aryl Hydrocarbon Receptor Nuclear Translocator 2) ELISA Kit |
| Product Code: | RTFI00578 |
| Size: | 96 Assays |
| Target: | Rat ARNT2 |
| Alias: | ARNT2, Aryl hydrocarbon receptor nuclear translocator 2, ARNT protein 2 |
| Reactivity: | Rat |
| Detection Method: | Sandwich ELISA, Double Antibody |
| Sensitivity: | 0.094ng/ml |
| Range: | 0.156-10ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Rat ARNT2 and the recovery rates were calculated by comparing the measured value to the expected amount of Rat ARNT2 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat ARNT2 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| Intra-Assay: | CV <8% | ||||||||||||||||
| Inter-Assay: | CV <10% |
| Uniprot: | Q78E60 |
| UniProt Protein Function: | ARNT2: Specifically recognizes the xenobiotic response element (XRE). 2 isoforms of the human protein are produced by alternative splicing. |
| UniProt Protein Details: | Protein type:DNA-binding; Apoptosis; Transcription factor Cellular Component: transcription factor complex; cytoplasm; nucleus Molecular Function:protein dimerization activity; signal transducer activity; DNA binding; aryl hydrocarbon receptor binding; protein heterodimerization activity; transcription factor activity Biological Process: transcription from RNA polymerase II promoter; central nervous system development; transcription, DNA-dependent; regulation of transcription, DNA-dependent; in utero embryonic development; positive regulation of transcription, DNA-dependent; positive regulation of cell proliferation; response to hypoxia; positive regulation of transcription from RNA polymerase II promoter; brain development; signal transduction; response to estradiol stimulus; negative regulation of apoptosis |
| UniProt Code: | Q78E60 |
| NCBI GenInfo Identifier: | 158631187 |
| NCBI Gene ID: | 25243 |
| NCBI Accession: | NP_036913.3 |
| UniProt Secondary Accession: | Q78E60,Q30B64, Q63643, Q63646, Q80T24, |
| UniProt Related Accession: | Q78E60 |
| Molecular Weight: | 75,333 Da |
| NCBI Full Name: | aryl hydrocarbon receptor nuclear translocator 2 |
| NCBI Synonym Full Names: | aryl hydrocarbon receptor nuclear translocator 2 |
| NCBI Official Symbol: | Arnt2Â Â |
| NCBI Protein Information: | aryl hydrocarbon receptor nuclear translocator 2 |
| UniProt Protein Name: | Aryl hydrocarbon receptor nuclear translocator 2 |
| Protein Family: | Aryl hydrocarbon receptor nuclear translocator |
| UniProt Gene Name: | Arnt2Â Â |
| UniProt Entry Name: | ARNT2_RAT |
| Step | Procedure |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37°C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum: | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles. |
| Plasma: | Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid: | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell Culture Supernatant: | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell Lysates: | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C. |
| Tissue Homogenates: | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C. |
| Tissue Lysates: | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk: | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Mouse ARNT2 ELISA Kit
Rat Viperin ELISA Kit
Rat Osteonectin (ON) ELISA Kit
Rat Visfatin ELISA Kit
Rat SCF ELISA Kit
Rat Catalase ELISA Kit
