null

Mouse Thioredoxin / TRX protein ELISA Kit

SKU:
MOFI00280
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P10639
Sensitivity:
37.5pg/ml
Range:
62.5-4000pg/ml
ELISA Type:
Sandwich
Synonyms:
Txn, Thioredoxin, Trx, Trx1, TXN, TXN1
Reactivity:
Mouse
Research Area:
Cell Biology
€649
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Mouse Thioredoxin/TRX protein ELISA Kit

The Mouse Thioredoxin (Trx) Protein ELISA Kit is specifically designed for the precise measurement of thioredoxin levels in mouse samples such as serum, plasma, and cell culture supernatants. With its high sensitivity and specificity, this kit ensures accurate and reliable results for various research applications.Thioredoxin is a key protein involved in redox regulation and plays a crucial role in maintaining cellular redox balance and protecting cells from oxidative stress. Dysregulation of thioredoxin has been linked to various diseases including cancer, inflammatory disorders, and neurodegenerative diseases, making it a valuable biomarker for investigating these conditions and exploring potential therapeutic strategies.

With the Mouse Thioredoxin (Trx) Protein ELISA Kit, researchers can confidently study the role of thioredoxin in different biological processes and diseases, paving the way for new insights and developments in the field of biomedical research.

Product Name:Mouse Thioredoxin / TRX protein ELISA Kit
Product Code:MOFI00280
Size:96 Assays
Alias:Txn, Thioredoxin, Trx, Trx1, TXN, TXN1
Detection Method:Sandwich ELISA
Application:This immunoassay kit allows for the in vitro quantitative determination of Mouse Txn concentrations in serum plasma and other biological fluids.
Sensitivity:37.5pg/ml
Range:62.5-4000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery: Matrices listed below were spiked with certain level of Mouse Txn and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse Txn in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)85-10090
EDTA plasma(n=5)88-9492
UFH plasma(n=5)89-10095
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse Txn and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)96-105%85-103%85-105%
EDTA plasma(n=5)82-98%83-96%85-92%
UFH plasma(n=5)83-95%80-99%82-94%
Intra Assay:CV <8%
Inter Assay:CV <10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8-12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotP10639
UniProt Protein Function:TXN: Participates in various redox reactions through the reversible oxidation of its active center dithiol to a disulfide and catalyzes dithiol-disulfide exchange reactions. Plays a role in the reversible S-nitrosylation of cysteine residues in target proteins, and thereby contributes to the response to intracellular nitric oxide. Nitrosylates the active site Cys of CASP3 in response to nitric oxide (NO), and thereby inhibits caspase-3 activity. Induces the FOS/JUN AP-1 DNA-binding activity in ionizing radiation (IR) cells through its oxidation/reduction status and stimulates AP-1 transcriptional activity. Homodimer; disulfide-linked. Interacts with TXNIP through the redox-active site. Interacts with MAP3K5 and CASP3. In case of infection, interacts with S.typhimurium protein slrP. Interacts with APEX1; the interaction stimulates the FOS/JUN AP-1 DNA- binding activity in a redox-dependent manner. Up-regulated by ionizing radiation. Belongs to the thioredoxin family.
UniProt Protein Details:

Protein type:Nuclear receptor co-regulator

Cellular Component: mitochondrion; cell soma; axon; dendrite; cytoplasm; extracellular region; nucleus; cytosol

Molecular Function:protein binding; enzyme binding; protein disulfide oxidoreductase activity; peptide disulfide oxidoreductase activity; oxidoreductase activity, acting on sulfur group of donors, disulfide as acceptor

Biological Process: response to radiation; sulfate assimilation; negative regulation of protein export from nucleus; transcription, DNA-dependent; regulation of transcription, DNA-dependent; protein folding; transport; cell redox homeostasis; regulation of protein import into nucleus, translocation; negative regulation of transcription from RNA polymerase II promoter; positive regulation of peptidyl-serine phosphorylation; glycerol ether metabolic process; positive regulation of DNA binding

UniProt Code:P10639
NCBI GenInfo Identifier:6755911
NCBI Gene ID:22166
NCBI Accession:NP_035790.1
UniProt Secondary Accession:P10639,Q52KC4, Q9D8R0,
UniProt Related Accession:P10639
Molecular Weight:11,675 Da
NCBI Full Name:thioredoxin
NCBI Synonym Full Names:thioredoxin 1
NCBI Official Symbol:Txn1  
NCBI Official Synonym Symbols:ADF; Txn; Trx1; AW550880  
NCBI Protein Information:thioredoxin; trx; ATL-derived factor
UniProt Protein Name:Thioredoxin
UniProt Synonym Protein Names:ATL-derived factor
Protein Family:Thioredoxin
UniProt Gene Name:Txn  
UniProt Entry Name:THIO_MOUSE

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

Plasma:

Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 - g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.

Urine & Cerebrospinal Fluid:

Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.

Cell culture supernatant:

Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.

Cell lysates:

Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.

Tissue homogenates:

The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.

Tissue lysates:

Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.

Breast Milk:

Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products