null

Mouse TGF-beta 3 ELISA Kit

SKU:
MOFI00100
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P17125
Sensitivity:
9.375pg/ml
Range:
15.625-1000pg/ml
ELISA Type:
Sandwich
Synonyms:
TGF-Beta3, Transforming Growth Factor Beta 3, TGFBeta3, TGFB3, ARVD, FLJ16571, TGF-beta3, TGF-beta-3, transforming growth factor beta-3, transforming growth factor, beta 3
Reactivity:
Mouse
$779
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Mouse TGF-beta 3 ELISA Kit

The Mouse TGF-Beta 3 ELISA Kit is specifically designed for the precise measurement of TGF-Beta 3 levels in mouse serum, plasma, and cell culture supernatants. This kit offers exceptional sensitivity and specificity, guaranteeing accurate and consistent results, making it perfect for various research purposes.TGF-Beta 3 is a key cytokine involved in regulating cell growth, differentiation, and immune response. It plays a vital role in various physiological processes, including wound healing, inflammation, and tissue repair. Dysregulation of TGF-Beta 3 has been linked to several diseases, such as cancer, fibrosis, and autoimmune disorders, highlighting its importance as a potential biomarker for disease diagnosis and therapeutic development.

With the Mouse TGF-Beta 3 ELISA Kit, researchers can effectively analyze TGF-Beta 3 levels in mouse samples, aiding in the understanding of its role in disease pathogenesis and providing insights for novel treatment strategies. Get your hands on this cutting-edge kit today for accurate and reliable TGF-Beta 3 detection in mouse models.

Product Name:Mouse TGF-beta 3 ELISA Kit
Product Code:MOFI00100
Size:96 Assays
Alias:TGF-beta3, Transforming Growth Factor Beta 3, TGFbeta3, TGFB3, ARVD, FLJ16571, TGF-beta3, TGF-beta-3, transforming growth factor beta-3, transforming growth factor, beta 3
Detection Method:Sandwich ELISA
Application:This immunoassay kit allows for the in vitro quantitative determination of Mouse TGF-beta3 concentrations in serum plasma and other biological fluids.
Sensitivity:9.375pg/ml
Range:15.625-1000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery: Matrices listed below were spiked with certain level of Mouse TGF-beta3 and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse TGF-beta3 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)89-10196
EDTA plasma(n=5)85-9992
UFH plasma(n=5)91-10498
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse TGF-beta3 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)89-102%90-104%85-104%
EDTA plasma(n=5)90-99%84-100%83-90%
UFH plasma(n=5)80-88%86-100%81-100%
Intra Assay:CV <8%
Inter Assay:CV <10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotP17125
UniProt Protein Function:Function: Involved in embryogenesis and cell differentiation.
NCBI Summary:This gene encodes a member of the transforming growth factor (TGF) beta superfamily of cell regulatory proteins that control adhesion, proliferation, differentiation and transformation of many cell types. The encoded protein likely undergoes proteolytic cleavage similar to the human ortholog to generate an active peptide from the C-terminal region (TGF-beta 3), which is rendered inactive by its non-covalent association with the N-terminal peptide called the "Latency-associated peptide." Mice lacking the encoded protein die shortly after birth, and display abnormal pulmonary development and defective palatogenesis. [provided by RefSeq, Jul 2015]
UniProt Code:P17125
NCBI GenInfo Identifier:135685
NCBI Gene ID:21809
NCBI Accession:P17125.1
UniProt Related Accession:P17125
Molecular Weight:46,885 Da
NCBI Full Name:Transforming growth factor beta-3
NCBI Synonym Full Names:transforming growth factor, beta 3
NCBI Official Symbol:Tgfb3  
NCBI Official Synonym Symbols:Tgfb-3  
NCBI Protein Information:transforming growth factor beta-3; TGF-beta-3
UniProt Protein Name:Transforming growth factor beta-3
Protein Family:Transforming growth factor
UniProt Gene Name:Tgfb3  
UniProt Entry Name:TGFB3_MOUSE

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

Plasma:

Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.

Urine & Cerebrospinal Fluid:

Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.

Cell culture supernatant:

Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.

Cell lysates:

Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.

Tissue homogenates:

The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.

Tissue lysates:

Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.

Breast Milk:

Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products