Mouse Somatoliberin/GHRH ELISA Kit- High Sensitivity

Product Name:	Mouse Somatoliberin / GHRH ELISA Kit
Product Code:	MOFI00239
Size:	96 Assays
Alias:	Ghrh, GRF, GHRF, Somatorelin, Somatocrinin, Growth hormone-releasing factor
Detection Method:	Sandwich ELISA
Application:	This immunoassay kit allows for the in vitro quantitative determination of Mouse Ghrh concentrations in serum plasma and other biological fluids.
Sensitivity:	9.375pg/ml
Range:	15.625-1000pg/ml
Storage:	4°C for 6 months
Note:	For Research Use Only

Recovery:

Matrices listed below were spiked with certain level of Mouse Ghrh and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse Ghrh in samples.

Matrix	Recovery range(%)	Average(%)
serum(n=5)	91-100	94
EDTA plasma(n=5)	87-103	95
UFH plasma(n=5)	88-103	96

Linearity:

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse Ghrh and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample	1:2	1:4	1:8
serum(n=5)	90-100%	89-105%	85-96%
EDTA plasma(n=5)	91-98%	82-98%	88-96%
UFH plasma(n=5)	83-95%	81-97%	85-100%

Intra Assay:

CV <8%

Inter Assay:

CV <10%

Component	Quantity	Storage
ELISA Microplate (Dismountable)	8-12 strips	4°C for 6 months
Lyophilized Standard	2	4°C/-20°C
Sample/Standard Dilution Buffer	20ml	4°C
Biotin-labeled Antibody(Concentrated)	120ul	4°C (Protect from light)
Antibody Dilution Buffer	10ml	4°C
HRP-Streptavidin Conjugate(SABC)	120ul	4°C (Protect from light)
SABC Dilution Buffer	10ml	4°C
TMB Substrate	10ml	4°C (Protect from light)
Stop Solution	10ml	4°C
Wash Buffer(25X)	30ml	4°C
Plate Sealer	5	-

Other materials and equipment required:

Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir

Uniprot

P16043

UniProt Protein Function:	GHRH: GRF is released by the hypothalamus and acts on the adenohypophyse to stimulate the secretion of growth hormone. Belongs to the glucagon family. 2 isoforms of the human protein are produced by alternative splicing.
UniProt Protein Details:	Protein type:Secreted; Secreted, signal peptide Chromosomal Location of Human Ortholog: 2 H1\|2 78.25 cM Cellular Component: axon terminus; extracellular region; extracellular space; neuron projection; perikaryon; terminal bouton Molecular Function:growth hormone-releasing hormone activity; growth hormone-releasing hormone receptor binding; hormone activity; protein binding Biological Process: adenohypophysis development; adenylate cyclase-activating G-protein coupled receptor signaling pathway; cAMP-mediated signaling; circadian sleep/wake cycle, non-REM sleep; elevation of cytosolic calcium ion concentration; G-protein signaling, coupled to cAMP nucleotide second messenger; growth hormone secretion; positive regulation of cAMP biosynthetic process; positive regulation of cAMP metabolic process; positive regulation of cell proliferation; positive regulation of circadian sleep/wake cycle, non-REM sleep; positive regulation of growth hormone secretion; positive regulation of hormone secretion; positive regulation of multicellular organism growth; positive regulation of transcription, DNA-templated; response to food
NCBI Summary:	This gene encodes a hormone that has stimulatory effects on pituitary growth hormone synthesis and release, and somatotrope expansion. The encoded preproprotein undergoes proteolytic processing to generate the mature peptide that is secreted by hypothalamus. Mice lacking the encoded protein are deficient in the growth hormone, live longer and exhibit growth retardation, enhanced insulin sensitivity and increased xenobiotic metabolism. [provided by RefSeq, Jul 2016]
UniProt Code:	P16043
NCBI GenInfo Identifier:	1046552726
NCBI Gene ID:	14601
NCBI Accession:	NP_001316612.1
UniProt Related Accession:	P16043
Molecular Weight:	12,064 Da
NCBI Full Name:	somatoliberin preproprotein
NCBI Synonym Full Names:	growth hormone releasing hormone
NCBI Official Symbol:	Ghrh
NCBI Official Synonym Symbols:	GRF; Ghrf
NCBI Protein Information:	somatoliberin
UniProt Protein Name:	Somatoliberin
UniProt Synonym Protein Names:	Growth hormone-releasing factor; GRF; Growth hormone-releasing hormone; GHRH
Protein Family:	Somatoliberin
UniProt Gene Name:	Ghrh

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Step	Procedure
1.	Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.	Aliquot 0.1ml standard solutions into the standard wells.
3.	Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.	Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.	Seal the plate with a cover and incubate at 37 °C for 90 min.
6.	Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.	Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.	Seal the plate with a cover and incubate at 37°C for 60 min.
9.	Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.	Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.	Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.	Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.	Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14.	Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum:	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma:	Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 - g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid:	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant:	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates:	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.
Tissue homogenates:	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates:	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk:	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Mouse Somatoliberin / GHRH ELISA Kit (MOFI00239)

Description