null

Mouse Slc18a2 / Solute Carrier Family 18,Member 2 ELISA Kit

SKU:
MOFI01116
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q8BRU6
Sensitivity:
46.875pg/ml
Range:
78.125-5000pg/ml
ELISA Type:
Sandwich
Synonyms:
Slc18a2
Reactivity:
Mouse
Research Area:
Neuroscience
$779
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Mouse Slc18a2/Solute Carrier Family 18,Member 2 ELISA Kit

The Mouse SLC18A2 (Solute Carrier Family 18 Member 2) ELISA Kit is a powerful tool for detecting levels of SLC18A2 in mouse samples such as serum, plasma, and cell culture supernatants. This kit offers high sensitivity and specificity, ensuring accurate and reproducible results for a variety of research applications.SLC18A2 is a key member of the solute carrier family, playing a critical role in the transport of neurotransmitters such as serotonin and dopamine.

Dysregulation of SLC18A2 has been linked to various neurological disorders, making it a valuable biomarker for studying these conditions and developing potential therapeutic interventions.Overall, the Mouse SLC18A2 ELISA Kit is an essential resource for researchers seeking to better understand the role of SLC18A2 in neurological function and disease, offering reliable and precise measurements for impactful research outcomes.

Product Name:Mouse Slc18a2 / Solute Carrier Family 18,Member 2 ELISA Kit
Product Code:MOFI01116
Size:96 Assays
Alias:Slc18a2
Detection Method:Sandwich ELISA
Application:This immunoassay kit allows for the in vitro quantitative determination of Mouse Slc18a2 concentrations in serum plasma and other biological fluids.
Sensitivity:46.875pg/ml
Range:78.125-5000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery: Matrices listed below were spiked with certain level of Mouse Slc18a2 and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse Slc18a2 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)85-10493
EDTA plasma(n=5)92-10296
UFH plasma(n=5)86-10292
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse Slc18a2 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)85-97%85-104%92-103%
EDTA plasma(n=5)89-98%85-94%84-95%
UFH plasma(n=5)81-97%80-98%82-100%
Intra Assay:CV <8%
Inter Assay:CV <10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotQ8BRU6
UniProt Protein Function:SLC18A2: Involved in the ATP-dependent vesicular transport of biogenic amine neurotransmitters. Pumps cytosolic monoamines including dopamine, norepinephrine, serotonin, and histamine into synaptic vesicles. Requisite for vesicular amine storage prior to secretion via exocytosis. Belongs to the major facilitator superfamily. Vesicular transporter family.
UniProt Protein Details:

Protein type:Transporter; Transporter, SLC family; Membrane protein, multi-pass; Membrane protein, integral

Chromosomal Location of Human Ortholog: 10q25

Cellular Component: synaptic vesicle; synaptic vesicle membrane; membrane; cell soma; integral to plasma membrane; plasma membrane; terminal button

Molecular Function:serotonin transmembrane transporter activity; enzyme binding; amine transmembrane transporter activity; heat shock protein binding; monoamine transmembrane transporter activity; drug binding

Biological Process: dopamine transport; neurotransmitter secretion; death; amine transport; response to amphetamine; monoamine transport; locomotory behavior; response to herbicide; glucose homeostasis; endocytic recycling; response to cocaine; sequestering of neurotransmitter; post-embryonic development; response to starvation; synaptic transmission; insulin secretion; response to zinc ion; serotonin transport; transmembrane transport; negative regulation of neurotransmitter transport; aging; response to corticosterone stimulus

NCBI Summary:The vesicular monoamine transporter acts to accumulate cytosolic monoamines into synaptic vesicles, using the proton gradient maintained across the synaptic vesicular membrane. Its proper function is essential to the correct activity of the monoaminergic systems that have been implicated in several human neuropsychiatric disorders. The transporter is a site of action of important drugs, including reserpine and tetrabenazine (summary by Peter et al., 1993 [PubMed 7905859]). See also SLC18A1 (MIM 193002).[supplied by OMIM, Jan 2011]
UniProt Code:Q8BRU6
NCBI GenInfo Identifier:1722742
NCBI Gene ID:6571
NCBI Accession:Q05940.2
UniProt Secondary Accession:Q8BRU6,Q8BRU6, Q01827,
UniProt Related Accession:Q05940
Molecular Weight:514
NCBI Full Name:Synaptic vesicular amine transporter
NCBI Synonym Full Names:solute carrier family 18 (vesicular monoamine transporter), member 2
NCBI Official Symbol:SLC18A2  
NCBI Official Synonym Symbols:SVAT; SVMT; VAT2; VMAT2  
NCBI Protein Information:synaptic vesicular amine transporter; monoamine transporter; vesicular amine transporter 2; vesicle monoamine/H+ antiporter; solute carrier family 18 member 2; vesicle monoamine transporter type 2; monoamine neurotransmitter transporter; solute carrier fa
UniProt Protein Name:Synaptic vesicular amine transporter
UniProt Synonym Protein Names:Monoamine transporter; Solute carrier family 18 member 2; Vesicular amine transporter 2; VAT2
UniProt Gene Name:SLC18A2  
UniProt Entry Name:VMAT2_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

Plasma:

Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.

Urine & Cerebrospinal Fluid:

Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.

Cell culture supernatant:

Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.

Cell lysates:

Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.

Tissue homogenates:

The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.

Tissue lysates:

Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.

Breast Milk:

Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products