null

Mouse RGS3 / Regulator of G-protein signaling 3 ELISA Kit

SKU:
MOFI00212
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q9DC04
Sensitivity:
0.094ng/ml
Range:
0.156-10ng/ml
ELISA Type:
Sandwich
Synonyms:
Rgs3, C2PA,
Reactivity:
Mouse
$779
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Mouse RGS3/Regulator of G-protein signaling 3 ELISA Kit

The Mouse RGS3 (Regulator of G-protein Signaling 3) ELISA Kit is specifically designed for the accurate and precise measurement of RGS3 levels in mouse serum, plasma, and cell culture supernatants. This kit offers exceptional sensitivity and specificity, ensuring reliable and reproducible results for a variety of research applications.RGS3 is a critical regulator of G-protein signaling pathways, playing a key role in modulating cellular responses to various stimuli. Dysregulation of RGS3 has been implicated in a wide range of diseases, including cardiovascular disorders, neurological conditions, and cancer.

As such, RGS3 serves as an important biomarker for studying these diseases and developing potential therapeutic interventions.With the Mouse RGS3 ELISA Kit, researchers can gain valuable insights into the role of RGS3 in health and disease, advancing our understanding of G-protein signaling pathways and their implications for various pathologies. Trust in the accuracy and reliability of this kit to support your research endeavors.

Product Name:Mouse RGS3 / Regulator of G-protein signaling 3 ELISA Kit
Product Code:MOFI00212
Size:96 Assays
Alias:Rgs3, C2PA
Detection Method:Sandwich ELISA
Application:This immunoassay kit allows for the in vitro quantitative determination of Mouse Rgs3 concentrations in serum plasma and other biological fluids.
Sensitivity:0.094ng/ml
Range:0.156-10ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery: Matrices listed below were spiked with certain level of Mouse Rgs3 and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse Rgs3 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)89-10094
EDTA plasma(n=5)90-10094
UFH plasma(n=5)85-10292
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse Rgs3 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)87-102%85-100%85-105%
EDTA plasma(n=5)82-93%82-89%83-94%
UFH plasma(n=5)84-98%81-99%83-94%
Intra Assay:CV <8%
Inter Assay:CV <10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotQ9DC04
UniProt Protein Function:RGS3: Down-regulates signaling from heterotrimeric G-proteins by increasing the GTPase activity of the alpha subunits, thereby driving them into their inactive GDP-bound form. Down-regulates G- protein-mediated release of inositol phosphates and activation of MAP kinases. 6 isoforms of the human protein are produced by alternative splicing.
UniProt Protein Details:

Protein type:GAPs; GAPs, RGS

Cellular Component: nucleoplasm; membrane; cytoplasm; plasma membrane; nucleus

Molecular Function:GTPase activator activity

Biological Process: G-protein coupled receptor protein signaling pathway; signal transduction; negative regulation of signal transduction; positive regulation of GTPase activity

UniProt Code:Q9DC04
NCBI GenInfo Identifier:67477416
NCBI Gene ID:50780
NCBI Accession:Q9DC04.2
UniProt Secondary Accession:Q9DC04,Q5SRB1, Q5SRB4, Q5SRB8, Q8CEE3, Q8VI25, Q925G9 Q9JL22, Q9JL23, Q9QXA2,
UniProt Related Accession:Q9DC04
Molecular Weight:
NCBI Full Name:Regulator of G-protein signaling 3
NCBI Synonym Full Names:regulator of G-protein signaling 3
NCBI Official Symbol:Rgs3  
NCBI Official Synonym Symbols:C2pa; RGS3S; PDZ-RGS3; C2PA-RGS3; 4930506N09Rik  
NCBI Protein Information:regulator of G-protein signaling 3; C2 membrane binding, PDZ protein/protein interaction, ATP/GTP binding domains
UniProt Protein Name:Regulator of G-protein signaling 3
UniProt Synonym Protein Names:C2PA
Protein Family:Regulator of G-protein signaling
UniProt Gene Name:Rgs3  
UniProt Entry Name:RGS3_MOUSE

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

Plasma:

Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.

Urine & Cerebrospinal Fluid:

Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.

Cell culture supernatant:

Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.

Cell lysates:

Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.

Tissue homogenates:

The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.

Tissue lysates:

Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.

Breast Milk:

Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products