Mouse Ptpn1 ELISA Kit
- SKU:
- MOFI00413
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P35821
- Sensitivity:
- 0.469ng/ml
- Range:
- 0.781-50ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- Ptpn1, Tyrosine-protein phosphatase non-receptor type 1, Protein-tyrosine phosphatase 1B, PTP-1B, PTP1B, protein tyrosine phosphatase 1B, protein tyrosine phosphatase, non-receptor type 1, PTP1Bprotein tyrosine phosphatase, placental
- Reactivity:
- Mouse
Description
Mouse Ptpn1 ELISA Kit
The Mouse PTPN1 (Protein Tyrosine Phosphatase Non-Receptor Type 1) ELISA Kit is a powerful tool for researchers looking to quantify PTPN1 levels in mouse samples. This kit is specifically designed for accurate detection in serum, plasma, and cell lysates, with high sensitivity and specificity for reliable and reproducible results.PTPN1 is a key enzyme involved in the regulation of various cellular processes, including cell growth, differentiation, and metabolism.
Dysregulation of PTPN1 has been implicated in a variety of diseases, making it a valuable target for research in cancer, diabetes, and autoimmune disorders.With the Mouse PTPN1 ELISA Kit, researchers can gain valuable insights into the role of PTPN1 in disease pathology and potential therapeutic strategies. Order your kit today and take your research to the next level.
Product Name: | Mouse Ptpn1 ELISA Kit |
Product Code: | MOFI00413 |
Size: | 96 Assays |
Alias: | Ptpn1, Tyrosine-protein phosphatase non-receptor type 1, Protein-tyrosine phosphatase 1B, PTP-1B, PTP1B, protein tyrosine phosphatase 1B, protein tyrosine phosphatase, non-receptor type 1, PTP1Bprotein tyrosine phosphatase, placental |
Detection Method: | Sandwich ELISA |
Application: | This immunoassay kit allows for the in vitro quantitative determination of Mouse Ptpn1 concentrations in serum plasma and other biological fluids. |
Sensitivity: | 0.469ng/ml |
Range: | 0.781-50ng/ml |
Storage: | 4°C for 6 months |
Note: | For Research Use Only |
Recovery: | Matrices listed below were spiked with certain level of Mouse Ptpn1 and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse Ptpn1 in samples. | ||||||||||||||||
| |||||||||||||||||
Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse Ptpn1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
Intra Assay: | CV <8% | ||||||||||||||||
Inter Assay: | CV <10% |
Component | Quantity | Storage |
ELISA Microplate (Dismountable) | 8-12 strips | 4°C for 6 months |
Lyophilized Standard | 2 | 4°C/-20°C |
Sample/Standard Dilution Buffer | 20ml | 4°C |
Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
Antibody Dilution Buffer | 10ml | 4°C |
HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
SABC Dilution Buffer | 10ml | 4°C |
TMB Substrate | 10ml | 4°C (Protect from light) |
Stop Solution | 10ml | 4°C |
Wash Buffer(25X) | 30ml | 4°C |
Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
Uniprot | P35821 |
UniProt Protein Function: | PTP1B: a non-receptor phospho-tyrosine protein phosphatase which acts as a regulator of endoplasmic reticulum unfolded protein response. Mediates dephosphorylation and inactivation of PERK. May play an important role in CKII- and p60c-src-induced signal transduction cascades. May regulate the EFNA5-EPHA3 signaling pathway which modulates cell reorganization and cell-cell repulsion. Negatively regulates insulin signaling by dephosphorylating the phosphotyrosine residues of insulin receptor. Also reported to dephosphorylate integrin, epidermal growth factor receptor, JAK2 and TYK2, regulating cell growth control and the cellular response to interferon. May regulate the hepatocyte growth factor receptor signaling pathway through dephosphorylation of MET. PTP1B knockout mice show resistance to dietary weight gain and enhanced insulin sensitivity, suggesting a possible role in treatment of obesity as well as type 2 diabetes. |
UniProt Protein Details: | Protein type:Motility/polarity/chemotaxis; Protein phosphatase, tyrosine (non-receptor); EC 3.1.3.48; Phosphatase Cellular Component: cytoplasm; cytoplasmic vesicle; cytosol; early endosome; endoplasmic reticulum; membrane; plasma membrane Molecular Function:enzyme binding; ephrin receptor binding; hydrolase activity; insulin receptor binding; phosphoprotein phosphatase activity; phosphoric monoester hydrolase activity; protein kinase binding; protein phosphatase 2A binding; protein tyrosine phosphatase activity; receptor tyrosine kinase binding; zinc ion binding Biological Process: actin cytoskeleton reorganization; activation of JNK activity; dephosphorylation; insulin receptor signaling pathway; negative regulation of MAP kinase activity; negative regulation of vascular endothelial growth factor receptor signaling pathway; protein amino acid dephosphorylation; regulation of endocytosis; regulation of insulin receptor signaling pathway; regulation of intracellular protein transport; regulation of signal transduction; unfolded protein response |
UniProt Code: | P35821 |
NCBI GenInfo Identifier: | 13543101 |
NCBI Gene ID: | 19246 |
NCBI Accession: | AAH05729.1 |
UniProt Secondary Accession: | P35821,Q60840, Q62131, Q64498, Q99JS1, |
UniProt Related Accession: | P35821 |
Molecular Weight: | Calculated MW: 50kDa |
NCBI Full Name: | Ptpn1 protein, partial |
NCBI Synonym Full Names: | protein tyrosine phosphatase, non-receptor type 1 |
NCBI Official Symbol: | Ptpn1Â Â |
NCBI Official Synonym Symbols: | PTP1B; PTP-1B; PTP-HA2Â Â |
NCBI Protein Information: | tyrosine-protein phosphatase non-receptor type 1 |
UniProt Protein Name: | Tyrosine-protein phosphatase non-receptor type 1 |
UniProt Synonym Protein Names: | Protein-tyrosine phosphatase 1B; PTP-1B; Protein-tyrosine phosphatase HA2; PTP-HA2 |
Protein Family: | PTPN13-like protein |
UniProt Gene Name: | Ptpn1Â Â |
UniProt Entry Name: | PTN1_MOUSE |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Step | Procedure |
1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
2. | Aliquot 0.1ml standard solutions into the standard wells. |
3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
4. | Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
Sample Type | Protocol |
Serum: | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
Plasma: | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 - g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
Urine & Cerebrospinal Fluid: | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
Cell culture supernatant: | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
Cell lysates: | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C. |
Tissue homogenates: | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
Tissue lysates: | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
Breast Milk: | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |