null

Mouse LIPF / Gastric triacylglycerol lipase ELISA Kit

SKU:
MOFI00206
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q9CPP7
Sensitivity:
46.875pg/ml
Range:
78.125-5000pg/ml
ELISA Type:
Sandwich
Synonyms:
Lipf, LIPF, Lipase, Gastric, GL, Gastric lipase, Gastric triacylglycerol lipase
Reactivity:
Mouse
Research Area:
Metabolism
$779
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Mouse LIPF/Gastric triacylglycerol lipase ELISA Kit

The Mouse LIPF (Gastric triacylglycerol lipase) ELISA Kit is a powerful tool for detecting levels of gastric triacylglycerol lipase in mouse samples such as serum, plasma, and cell culture supernatants. This kit offers high sensitivity and specificity, ensuring accurate and reproducible results for a variety of research applications.Gastric triacylglycerol lipase, also known as LIPF, is an enzyme involved in lipid digestion and metabolism in the stomach. It plays a crucial role in the breakdown of dietary fats and the absorption of essential nutrients.

Dysregulation of LIPF has been linked to various metabolic disorders and gastrointestinal diseases, making it a valuable target for studying these conditions and exploring potential therapeutic interventions.Overall, the Mouse LIPF ELISA Kit provides researchers with a reliable and efficient tool for investigating the role of gastric triacylglycerol lipase in health and disease, opening up new possibilities for understanding lipid metabolism and developing innovative treatments.

Product Name:Mouse LIPF / Gastric triacylglycerol lipase ELISA Kit
Product Code:MOFI00206
Size:96 Assays
Alias:Lipf, LIPF, Lipase, Gastric, GL, Gastric lipase, Gastric triacylglycerol lipase
Detection Method:Sandwich ELISA
Application:This immunoassay kit allows for the in vitro quantitative determination of Mouse Lipf concentrations in serum plasma and other biological fluids.
Sensitivity:46.875pg/ml
Range:78.125-5000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery: Matrices listed below were spiked with certain level of Mouse Lipf and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse Lipf in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)86-10193
EDTA plasma(n=5)86-9794
UFH plasma(n=5)86-10493
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse Lipf and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)95-104%91-105%90-104%
EDTA plasma(n=5)85-98%84-100%87-98%
UFH plasma(n=5)86-97%84-94%80-88%
Intra Assay:CV <8%
Inter Assay:CV <10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotQ9CPP7
UniProt Protein Function:LIPF: gastric lipase, an enzyme involved in the digestion of dietary triglycerides in the gastrointestinal tract, and responsible for 30% of fat digestion processes occurring in human. It is secreted by gastric chief cells in the fundic mucosa of the stomach, and it hydrolyzes the ester bonds of triglycerides under acidic pH conditions. The gene is a member of a conserved gene family of lipases that play distinct roles in neutral lipid metabolism. Several transcript variants encoding different isoforms have been found for this gene. [provided by RefSeq, Nov 2010]
UniProt Protein Details:

Protein type:EC 3.1.1.3; Secreted; Lipid Metabolism - glycerolipid; Secreted, signal peptide; Hydrolase

Cellular Component: extracellular region

Molecular Function:triacylglycerol lipase activity; hydrolase activity; hydrolase activity, acting on ester bonds

Biological Process: lipid metabolic process; lipid catabolic process

UniProt Code:Q9CPP7
NCBI GenInfo Identifier:13385836
NCBI Gene ID:67717
NCBI Accession:NP_080610.1
UniProt Secondary Accession:Q9CPP7,Q8BK78, Q9CPP8, Q9D6L1, Q9D6L9, Q9D6M9, Q9D6N8 Q9D6P3, Q9D6Q2, Q9D6Q3, Q9D6Q6, Q9D6S5,
UniProt Related Accession:Q9CPP7
Molecular Weight:44,637 Da
NCBI Full Name:gastric triacylglycerol lipase
NCBI Synonym Full Names:lipase, gastric
NCBI Official Symbol:Lipf  
NCBI Official Synonym Symbols:AV082900; 2310051B21Rik  
NCBI Protein Information:gastric triacylglycerol lipase; GL; gastric lipase
UniProt Protein Name:Gastric triacylglycerol lipase
Protein Family:Carboxylesterase
UniProt Gene Name:Lipf  
UniProt Entry Name:LIPG_MOUSE

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

Plasma:

Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.

Urine & Cerebrospinal Fluid:

Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.

Cell culture supernatant:

Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.

Cell lysates:

Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.

Tissue homogenates:

The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.

Tissue lysates:

Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.

Breast Milk:

Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products