null

Mouse Leptin receptor ELISA Kit

SKU:
MOFI00071
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P48356
Sensitivity:
18.75pg/ml
Range:
31.25-2000pg/ml
ELISA Type:
Sandwich
Synonyms:
Leptin R, Leptin receptor, CD295, LEP-R, LR, LEPRD, OB-R, OBR
Reactivity:
Mouse
€649
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Mouse Leptin receptor ELISA Kit

The Mouse Leptin Receptor ELISA Kit is specifically designed to accurately measure the levels of leptin receptor in mouse serum, plasma, and cell culture supernatants. This kit offers high sensitivity and specificity, ensuring precise and consistent results for various research applications.Leptin receptor is a key component in the regulation of energy balance and metabolism, playing a critical role in obesity, diabetes, and other metabolic disorders.

By measuring leptin receptor levels, researchers can gain insights into the mechanisms underlying these conditions and potentially develop targeted therapeutic interventions.Overall, the Mouse Leptin Receptor ELISA Kit is a valuable tool for studying the role of leptin receptor in metabolic pathways and exploring its potential as a therapeutic target for various diseases.

Product Name:Mouse Leptin receptor ELISA Kit
Product Code:MOFI00071
Size:96 Assays
Alias:Leptin R, Leptin receptor, CD295, LEP-R, LR, LEPRD, OB-R, OBR
Detection Method:Sandwich ELISA
Application:This immunoassay kit allows for the in vitro quantitative determination of Mouse Leptin R concentrations in serum plasma and other biological fluids.
Sensitivity:18.75pg/ml
Range:31.25-2000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery: Matrices listed below were spiked with certain level of Mouse Leptin R and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse Leptin R in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)92-10094
EDTA plasma(n=5)87-10296
UFH plasma(n=5)88-10596
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse Leptin R and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)85-102%95-105%88-102%
EDTA plasma(n=5)85-91%91-100%88-100%
UFH plasma(n=5)85-100%80-95%87-95%
Intra Assay:CV <8%
Inter Assay:CV <10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotP48356
UniProt Protein Function:LEPR: the receptor for leptin (obesity factor). A single-transmembrane-domain receptor of the cytokine receptor family. On ligand binding, mediates signaling through JAK2/STAT3. Involved in the regulation of fat metabolism and, in a hematopoietic pathway, required for normal lymphopoiesis. May play a role in reproduction. Five alternatively spliced transcript variants have been reported.
UniProt Protein Details:

Protein type:Membrane protein, integral; Receptor, cytokine

Cellular Component: extracellular space; membrane; integral to plasma membrane; extracellular region; plasma membrane; integral to membrane; receptor complex

Molecular Function:hematopoietin/interferon-class (D200-domain) cytokine receptor activity; identical protein binding; protein binding; transmembrane receptor activity; peptide hormone binding; protein-hormone receptor activity

Biological Process: cholesterol metabolic process; G-protein coupled receptor protein signaling pathway; positive regulation of MAPKKK cascade; eating behavior; negative regulation of gluconeogenesis; negative regulation of hydrolase activity; regulation of metabolic process; angiogenesis; signal transduction; leptin-mediated signaling pathway

UniProt Code:P48356
NCBI GenInfo Identifier:1352612
NCBI Gene ID:16847
NCBI Accession:P48356.1
UniProt Secondary Accession:P48356,O35686, O54986, Q61215, Q64309, Q9QWG3, Q9QWV5
UniProt Related Accession:P48356
Molecular Weight:90,887 Da
NCBI Full Name:Leptin receptor
NCBI Synonym Full Names:leptin receptor
NCBI Official Symbol:Lepr  
NCBI Official Synonym Symbols:db; Obr; obl; Leprb; Modb1; LEPROT; OB-RGRP; diabetes; obese-like  
NCBI Protein Information:leptin receptor; B219; LEP-R; OB receptor; leptin receptor gene-related protein
UniProt Protein Name:Leptin receptor
UniProt Synonym Protein Names:B219; OB receptor; OB-R; CD_antigen: CD295
Protein Family:Leptin receptor
UniProt Gene Name:Lepr  
UniProt Entry Name:LEPR_MOUSE

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

Plasma:

Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.

Urine & Cerebrospinal Fluid:

Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.

Cell culture supernatant:

Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.

Cell lysates:

Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.

Tissue homogenates:

The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.

Tissue lysates:

Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.

Breast Milk:

Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products