null

Mouse Integrin beta-3 (Itgb3) ELISA Kit (MOEB1469)

SKU:
MOEB1469
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
O54890
Range:
31.2-2000 pg/mL
ELISA Type:
Sandwich
Reactivity:
Mouse
€649
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Mouse Integrin beta-3 (Itgb3) ELISA Kit

The Mouse Integrin Beta 3 (ITGB3) ELISA Kit is a powerful tool for the precise measurement of ITGB3 levels in mouse samples, including serum, plasma, and cell culture supernatants. With exceptional sensitivity and specificity, this kit delivers accurate and consistent results, making it an invaluable asset for various research applications. ITGB3 is a key integrin protein that plays a crucial role in cell adhesion and signaling, influencing processes such as cell migration and proliferation. Dysregulation of ITGB3 has been implicated in various diseases, including thrombosis, cancer, and inflammation, highlighting its significance as a potential therapeutic target and biomarker for disease progression.

By utilizing the Mouse ITGB3 ELISA Kit, researchers can gain valuable insights into the role of ITGB3 in physiological and pathological processes, paving the way for innovative research discoveries and advancements in drug development. Trust in the reliable performance of this kit to drive your research forward with precision and confidence.

Product Name:Mouse Integrin beta-3 (Itgb3) ELISA Kit
SKU:MOEB1469
Size:96T
Target:Mouse Integrin beta-3 (Itgb3)
Synonyms:Platelet membrane glycoprotein IIIa, GPIIIa, CD61
Assay Type:Sandwich
Detection Method:ELISA
Reactivity:Mouse
Intra CV:0.0%
Inter CV:0.0%
Linearity:
Sample1:21:41:81:16
Serum(N=5)90-100%108-117%111-120%90-102%
EDTA Plasma(N=5)94-106%84-95%99-107%97-106%
Heparin Plasma(N=5)104-116%100-110%97-107%95-104%
Recovery:
Sample TypeAverage(%)Recovery Range(%)
Serum8080-80
Plasma8080-80
Function:Integrin alpha-V/beta-3 (ITGAV:ITGB3) is a receptor for cytotactin, fibronectin, laminin, matrix metalloproteinase-2, osteopontin, osteomodulin, prothrombin, thrombospondin, vitronectin and von Willebrand factor. Integrin alpha-IIB/beta-3 (ITGA2B:ITGB3) is a receptor for fibronectin, fibrinogen, plasminogen, prothrombin, thrombospondin and vitronectin. Integrins alpha-IIB/beta-3 and alpha-V/beta-3 recognize the sequence R-G-D in a wide array of ligands. Integrin alpha-IIB/beta-3 recognizes the sequence H-H-L-G-G-G-A-K-Q-A-G-D-V in fibrinogen gamma chain. Following activation integrin alpha-IIB/beta-3 brings about platelet/platelet interaction through binding of soluble fibrinogen. This step leads to rapid platelet aggregation which physically plugs ruptured endothelial surfaces. Fibrinogen binding enhances SELP expression in activated platelets (PubMed:19332769). ITGAV:ITGB3 binds to fractalkine (CX3CL1) and acts as its coreceptor in CX3CR1-dependent fractalkine signaling. ITGAV:ITGB3 binds to NRG1 (via EGF domain) and this binding is essential for NRG1-ERBB signaling. ITGAV:ITGB3 binds to FGF1 and this binding is essential for FGF1 signaling. ITGAV:ITGB3 binds to IGF1 and this binding is essential for IGF1 signaling (By similarity). ITGAV:ITGB3 binds to PLA2G2A via a site (site 2) which is distinct from the classical ligand-binding site (site 1) and this induces integrin conformational changes and enhanced ligand binding to site 1 (By similarity). ITGAV:ITGB3 acts as a receptor for fibrillin-1 (FBN1) and mediates R-G-D-dependent cell adhesion to FBN1.
Uniprot:O54890
Sample Type:Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids
Specificity:Natural and recombinant mouse Integrin beta-3
Sub Unit:Heterodimer of an alpha and a beta subunit (By similarity). Beta-3 (ITGB3) associates with either alpha-IIB (ITGA2B) or alpha-V (ITGAV). Interacts with FLNB and COMP (By similarity). Interacts with PDIA6 following platelet stimulation (By similarity). Interacts with SYK; upon activation by ITGB3 promotes platelet adhesion (By similarity). Interacts with MYO10 (By similarity). Interacts with DAB2 (PubMed:12606711). Interacts with FERMT2 (PubMed:18483218). Integrin ITGAV:ITGB3 interacts with FBLN5 (via N-terminus) (PubMed:11805835). Interacts with EMP2; regulates the levels of the heterodimer ITGA5:ITGB3 integrin expression on the plasma membrane (By similarity). ITGAV:ITGB3 interacts with NOV (By similarity). ITGAV:ITGB3 interacts with AGRA2 (By similarity). ITGAV:ITGB3 is found in a ternary complex with CX3CR1 and CX3CL1. ITGAV:ITGB3 is found in a ternary complex with NRG1 and ERBB3. ITGAV:ITGB3 is found in a ternary complex with FGF1 and FGFR1. ITGAV:ITGB3 is found in a ternary complex with IGF1 and IGF1R (By similarity). ITGAV:ITGB3 interacts with FBN1.
Research Area:Cancer
Subcellular Location:Cell membrane Single-pass type I membrane protein Cell projection Lamellipodium membrane Cell junction Focal adhesion
Storage:Please see kit components below for exact storage details
Note:For research use only
UniProt Code:O54890
NCBI GenInfo Identifier:160358856
NCBI Gene ID:16416
NCBI Accession:NP_058060.2
UniProt Secondary Accession:O54890,Q3TZC6,
UniProt Related Accession:O54890
Molecular Weight:86,738 Da
NCBI Full Name:integrin beta-3
NCBI Synonym Full Names:integrin beta 3
NCBI Official Symbol:Itgb3
NCBI Official Synonym Symbols:CD61; GP3A; INGRB3
NCBI Protein Information:integrin beta-3; GPIIIa; platelet gpIIIa; platelet membrane glycoprotein IIIa
UniProt Protein Name:Integrin beta-3
UniProt Synonym Protein Names:Platelet membrane glycoprotein IIIa; GPIIIa; CD_antigen: CD61
UniProt Gene Name:Itgb3
UniProt Entry Name:ITB3_MOUSE
Component Quantity (96 Assays) Storage
ELISA Microplate (Dismountable) 8×12 strips -20°C
Lyophilized Standard 2 -20°C
Sample Diluent 20ml -20°C
Assay Diluent A 10mL -20°C
Assay Diluent B 10mL -20°C
Detection Reagent A 120µL -20°C
Detection Reagent B 120µL -20°C
Wash Buffer 30mL 4°C
Substrate 10mL 4°C
Stop Solution 10mL 4°C
Plate Sealer 5 -

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir

*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.

Step
1. Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C.
2. Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform.
3. Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper.
4. Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C.
5. Repeat the wash process for five times as conducted in step 3.
6. Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction.
7. Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
8. Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters.
9. After experiment, store all reagents according to the specified storage temperature respectively until their expiry.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products