null

Mouse IL-17E / IL-25 ELISA Kit

SKU:
MOFI00933
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q9CPT4
Sensitivity:
9.375pg/ml
Range:
15.625-1000pg/ml
ELISA Type:
Sandwich
Synonyms:
IL-25, IL-17E, Interleukin-17E, interleukin-25
Reactivity:
Mouse
Research Area:
Cardiovascular
Signaling Molecule:
Cytokine
€599
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Mouse IL-17E/IL-25 ELISA Kit

The Mouse IL-17E/IL-25 ELISA Kit is specifically designed for the precise measurement of IL-17E/IL-25 levels in mouse serum, plasma, and cell culture supernatants. This kit offers high sensitivity and accuracy, ensuring dependable and consistent results for various research purposes.IL-17E and IL-25 are key cytokines involved in regulating immune responses, inflammation, and allergic reactions. They play crucial roles in conditions such as asthma, autoimmune diseases, and gastrointestinal disorders.

Therefore, the measurement of IL-17E and IL-25 levels is essential for understanding disease mechanisms and developing novel therapeutic approaches.Overall, the Mouse IL-17E/IL-25 ELISA Kit is a valuable tool for researchers studying immune system function, inflammatory diseases, and potential treatments targeting IL-17E and IL-25 pathways.

Product Name:Mouse IL-17E / IL-25 ELISA Kit
Product Code:MOFI00933
Size:96 Assays
Alias:IL-25, IL-17E, Interleukin-17E, interleukin-25
Detection Method:Sandwich ELISA
Application:This immunoassay kit allows for the in vitro quantitative determination of Mouse IL-25 concentrations in serum plasma and other biological fluids.
Sensitivity:9.375pg/ml
Range:15.625-1000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery: Matrices listed below were spiked with certain level of Mouse IL-25 and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse IL-25 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)87-10496
EDTA plasma(n=5)86-9891
UFH plasma(n=5)85-10594
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse IL-25 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)85-95%87-104%92-103%
EDTA plasma(n=5)82-96%86-97%84-100%
UFH plasma(n=5)83-98%80-97%82-93%
Intra Assay:CV <8%
Inter Assay:CV <10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotQ9CPT4
UniProt Protein Function:MYDGF: was previously thought to support proliferation of lymphoid cells and was considered an interleukin. However, this activity has not been reproducible and the function of this protein is currently unknown. [provided by RefSeq, Jul 2008]
UniProt Protein Details:

Protein type:Secreted, signal peptide; Secreted

Cellular Component: extracellular space; extracellular region

Biological Process: positive regulation of phosphoinositide 3-kinase cascade; positive regulation of protein kinase B signaling cascade; positive regulation of angiogenesis; positive regulation of MAPKKK cascade; positive regulation of endothelial cell proliferation; positive regulation of transcription from RNA polymerase II promoter; positive regulation of protein amino acid phosphorylation; negative regulation of apoptosis

NCBI Summary:The protein encoded by this gene was previously thought to support proliferation of lymphoid cells and was identified in error as interleukin 25. This activity has not been reproducible, however, and the function of this protein is currently unknown. [provided by RefSeq, Jul 2008]
UniProt Code:Q9CPT4
NCBI GenInfo Identifier:61221740
NCBI Gene ID:28106
NCBI Accession:Q9CPT4.1
UniProt Secondary Accession:Q9CPT4,Q3UG74, A2RSI7,
UniProt Related Accession:Q9CPT4
Molecular Weight:17,982 Da
NCBI Full Name:UPF0556 protein C19orf10 homolog
NCBI Synonym Full Names:DNA segment, Chr 17, Wayne State University 104, expressed
NCBI Official Symbol:D17Wsu104e  
NCBI Official Synonym Symbols:Il25; Ly6elg  
NCBI Protein Information:UPF0556 protein C19orf10 homolog
UniProt Protein Name:UPF0556 protein C19orf10 homolog
UniProt Synonym Protein Names:Interleukin-25; IL-25; Stromal cell-derived growth factor SF20
UniProt Gene Name:D17Wsu104e  
UniProt Entry Name:CS010_MOUSE

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

Plasma:

Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.

Urine & Cerebrospinal Fluid:

Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.

Cell culture supernatant:

Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.

Cell lysates:

Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.

Tissue homogenates:

The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.

Tissue lysates:

Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.

Breast Milk:

Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products