null

Mouse Factor XI / F11 ELISA Kit

SKU:
MOFI00300
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q91Y47
Sensitivity:
1.875ng/ml
Range:
3.125-200ng/ml
ELISA Type:
Sandwich
Synonyms:
F11, Coagulation factor XI, FXI, Plasma thromboplastin antecedent, PTA
Reactivity:
Mouse
Research Area:
Cardiovascular
$779
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Mouse Factor XI/F11 ELISA Kit

The Mouse Factor XI (F11) ELISA Kit is a powerful tool for quantitative analysis of factor XI levels in mouse serum, plasma, and cell culture supernatants. This kit offers exceptional sensitivity and specificity, guaranteeing precise and consistent results for various research purposes.Factor XI, also known as plasma thromboplastin antecedent, is a key player in the blood coagulation pathway, contributing to the formation of blood clots. Dysregulation of factor XI has been linked to thrombotic disorders and bleeding conditions, highlighting its importance as a diagnostic marker and potential therapeutic target.

Utilizing the Mouse Factor XI ELISA Kit allows researchers to explore the role of factor XI in various physiological and pathological processes, paving the way for advances in understanding thrombosis, hemostasis, and related diseases. Get accurate and reliable data with this innovative ELISA kit from Assay Genie.

Product Name:Mouse Factor XI / F11 ELISA Kit
Product Code:MOFI00300
Size:96 Assays
Alias:F11, Coagulation factor XI, FXI, Plasma thromboplastin antecedent, PTA
Detection Method:Sandwich ELISA
Application:This immunoassay kit allows for the in vitro quantitative determination of Mouse F11 concentrations in serum plasma and other biological fluids.
Sensitivity:1.875ng/ml
Range:3.125-200ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery: Matrices listed below were spiked with certain level of Mouse F11 and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse F11 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)85-10496
EDTA plasma(n=5)86-9993
UFH plasma(n=5)85-10091
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse F11 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)88-105%94-104%88-102%
EDTA plasma(n=5)86-97%84-100%82-100%
UFH plasma(n=5)82-99%93-99%84-99%
Intra Assay:CV <8%
Inter Assay:CV <10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8-12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotQ91Y47
UniProt Protein Function:F11: Factor XI triggers the middle phase of the intrinsic pathway of blood coagulation by activating factor IX. Defects in F11 are the cause of factor XI deficiency (FA11D); also known as plasma thromboplastin antecedent deficiency or Rosenthal syndrome. It is a hemorrhagic disease characterized by reduced levels and activity of factor XI resulting in moderate bleeding symptoms, usually occurring after trauma or surgery. Patients usually do not present spontaneous bleeding but women can present with menorrhagia. Hemorrhages are usually moderate. Belongs to the peptidase S1 family. Plasma kallikrein subfamily. 2 isoforms of the human protein are produced by alternative splicing.
UniProt Protein Details:

Protein type:EC 3.4.21.27; Protease; Secreted; Secreted, signal peptide

Chromosomal Location of Human Ortholog: 8 B1.1|8 25.14 cM

Cellular Component: extracellular space

Biological Process: blood coagulation; plasminogen activation; positive regulation of fibrinolysis; regulation of blood coagulation

NCBI Summary:This gene encodes a glycoprotein coagulation factor that plays an important role in intrinsic pathway of blood coagulation and hemostasis. The encoded protein is an inactive zymogen that can be activated by coagulation factor XIIa, thrombin or factor XIa to generate active factor XIa protease. Mice lacking the encoded protein display a survival advantage during peritoneal sepsis and resist inflammation and bacterial accumulation upon infection with Listeria. [provided by RefSeq, Apr 2015]
UniProt Code:Q91Y47
NCBI GenInfo Identifier:21312500
NCBI Gene ID:109821
NCBI Accession:NP_082342.1
UniProt Secondary Accession:Q91Y47,Q9DAT3,
UniProt Related Accession:Q91Y47
Molecular Weight:69,789 Da
NCBI Full Name:coagulation factor XI preproprotein
NCBI Synonym Full Names:coagulation factor XI
NCBI Official Symbol:F11  
NCBI Official Synonym Symbols:FXI; PTA; Cf11; AI503996; 1600027G01Rik  
NCBI Protein Information:coagulation factor XI
UniProt Protein Name:Coagulation factor XI
UniProt Synonym Protein Names:Plasma thromboplastin antecedent; PTA
Protein Family:Coagulation factor
UniProt Gene Name:F11  

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

Plasma:

Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 - g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.

Urine & Cerebrospinal Fluid:

Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.

Cell culture supernatant:

Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.

Cell lysates:

Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.

Tissue homogenates:

The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.

Tissue lysates:

Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.

Breast Milk:

Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products