Mouse Cyclic AMP-responsive element-binding protein 1 (Creb1) ELISA Kit (MOEB1147)
- SKU:
- MOEB1147
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- Q01147
- Range:
- 0.078-5 ng/mL
- ELISA Type:
- Sandwich
- Synonyms:
- CREB, Creb1, CREB
- Reactivity:
- Mouse
Description
Mouse Cyclic AMP-responsive element-binding protein 1 (Creb1) ELISA Kit
The Mouse CREB1 (Cyclic AMP-responsive Element-binding protein 1) ELISA Kit is specifically designed for the detection of CREB1 levels in mouse serum, plasma, and cell culture supernatants. This kit is known for its high sensitivity and specificity, ensuring reliable and reproducible results for a wide range of research applications.CREB1 is a key transcription factor that plays a critical role in various cellular processes, including cell growth, survival, and differentiation. It is also involved in memory formation and synaptic plasticity in the brain.
Dysregulation of CREB1 has been linked to a variety of diseases, including cancer, neurodegenerative disorders, and metabolic conditions.By accurately measuring CREB1 levels in biological samples, researchers can gain valuable insights into the functioning of this important protein and its role in disease pathology. The Mouse CREB1 ELISA Kit provides a powerful tool for studying CREB1 biology and potential therapeutic interventions.
| Product Name: | Mouse Cyclic AMP-responsive element-binding protein 1 (Creb1) ELISA Kit |
| SKU: | MOEB1147 |
| Size: | 96T |
| Target: | Mouse Cyclic AMP-responsive element-binding protein 1 (Creb1) |
| Synonyms: | CREB-1, Creb-1 |
| Assay Type: | Sandwich |
| Detection Method: | ELISA |
| Reactivity: | Mouse |
| Detection Range: | 0.078-5ng/mL |
| Sensitivity: | 0.039ng/mL |
| Intra CV: | 4.9% | ||||||||||||||||||||
| Inter CV: | 7.8% | ||||||||||||||||||||
| Linearity: |
| ||||||||||||||||||||
| Recovery: |
| ||||||||||||||||||||
| Function: | Phosphorylation-dependent transcription factor that stimulates transcription upon binding to the DNA cAMP response element (CRE), a sequence present in many viral and cellular promoters. Transcription activation is enhanced by the TORC coactivators which act independently of Ser-133 phosphorylation. Involved in different cellular processes including the synchronization of circadian rhythmicity and the differentiation of adipose cells. |
| Uniprot: | Q01147 |
| Sample Type: | Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids |
| Specificity: | Natural and recombinant mouse Cyclic AMP-responsive element-binding protein 1 |
| Sub Unit: | Interacts with PPRC1. Binds DNA as a dimer. This dimer is stabilized by magnesium ions. Interacts, through the bZIP domain, with the coactivators TORC1/CRTC1, TORC2/CRTC2 and TORC3/CRTC3. Interacts (phosphorylated form) with TOX3 (By similarity). When phosphorylated on Ser-133, binds CREBBP. Interacts with ARRB1. Binds to HIPK2 (By similarity). Interacts with SGK1 (By similarity). Interacts with CREBL2; regulates CREB1 phosphorylation, stability and transcriptional activity. |
| Research Area: | Neurosciences |
| Subcellular Location: | Nucleus |
| Storage: | Please see kit components below for exact storage details |
| Note: | For research use only |
| UniProt Protein Function: | CREB: a transcription factor of the leucine zipper family of DNA binding proteins. Binds as a homodimer to the cAMP-responsive element (CRE). Phosphorylated by several protein kinases, and induces transcription of genes in response to hormonal stimulation of the cAMP pathway. Two splice-variant isoforms have been described. |
| UniProt Protein Details: | Protein type:Transcription factor; DNA-binding Chromosomal Location of Human Ortholog: 2q34 Cellular Component: nucleoplasm; nucleus Molecular Function:RNA polymerase II transcription factor activity, enhancer binding; protein binding; enzyme binding; transcription cofactor activity; transcription factor activity Biological Process: transcription from RNA polymerase II promoter; circadian rhythm; lactation; axon guidance; response to glucagon stimulus; viral reproduction; nerve growth factor receptor signaling pathway; positive regulation of osteoclast differentiation; positive regulation of transcription, DNA-dependent; stress-activated MAPK cascade; positive regulation of multicellular organism growth; toll-like receptor 3 signaling pathway; signal transduction; protein amino acid phosphorylation; toll-like receptor 10 signaling pathway; response to organic substance; toll-like receptor 5 signaling pathway; synaptic transmission; toll-like receptor 4 signaling pathway; response to drug; epidermal growth factor receptor signaling pathway; mitochondrion organization and biogenesis; Notch signaling pathway; fibroblast growth factor receptor signaling pathway; phosphoinositide-mediated signaling; protein stabilization; secretory granule organization and biogenesis; MyD88-independent toll-like receptor signaling pathway; organelle organization and biogenesis; positive regulation of hormone secretion; positive regulation of lipid biosynthetic process; memory; toll-like receptor 2 signaling pathway; MyD88-dependent toll-like receptor signaling pathway; phospholipase C activation; pituitary gland development; toll-like receptor signaling pathway; positive regulation of fat cell differentiation; innate immune response; positive regulation of transcription from RNA polymerase II promoter; toll-like receptor 9 signaling pathway; regulation of cell size Disease: Histiocytoma, Angiomatoid Fibrous |
| NCBI Summary: | This gene encodes a transcription factor that is a member of the leucine zipper family of DNA binding proteins. This protein binds as a homodimer to the cAMP-responsive element, an octameric palindrome. The protein is phosphorylated by several protein kinases, and induces transcription of genes in response to hormonal stimulation of the cAMP pathway. Alternate splicing of this gene results in several transcript variants encoding different isoforms. [provided by RefSeq, Mar 2016] |
| UniProt Code: | Q01147 |
| NCBI GenInfo Identifier: | 4758054 |
| NCBI Gene ID: | 1385 |
| NCBI Accession: | NP_004370.1 |
| UniProt Secondary Accession: | Q01147,Q01147, |
| UniProt Related Accession: | P16220 |
| Molecular Weight: | Predicted Band Size: 37kDa |
| NCBI Full Name: | cyclic AMP-responsive element-binding protein 1 isoform A |
| NCBI Synonym Full Names: | cAMP responsive element binding protein 1 |
| NCBI Official Symbol: | CREB1 |
| NCBI Official Synonym Symbols: | CREB; CREB-1 |
| NCBI Protein Information: | cyclic AMP-responsive element-binding protein 1 |
| UniProt Protein Name: | Cyclic AMP-responsive element-binding protein 1 |
| Protein Family: | CREB-binding protein |
| UniProt Gene Name: | CREB1 |
| UniProt Entry Name: | CREB1_HUMAN |
| Component | Quantity (96 Assays) | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | -20°C |
| Lyophilized Standard | 2 | -20°C |
| Sample Diluent | 20ml | -20°C |
| Assay Diluent A | 10mL | -20°C |
| Assay Diluent B | 10mL | -20°C |
| Detection Reagent A | 120µL | -20°C |
| Detection Reagent B | 120µL | -20°C |
| Wash Buffer | 30mL | 4°C |
| Substrate | 10mL | 4°C |
| Stop Solution | 10mL | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.
| Step | |
| 1. | Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C. |
| 2. | Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform. |
| 3. | Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper. |
| 4. | Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C. |
| 5. | Repeat the wash process for five times as conducted in step 3. |
| 6. | Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction. |
| 7. | Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing. |
| 8. | Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters. |
| 9. | After experiment, store all reagents according to the specified storage temperature respectively until their expiry. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human Cyclic AMP-responsive element-binding protein 1 (CREB1) ELISA Kit (HUEB0051)
Rat Cyclic AMP-responsive element-binding protein 1 (Creb1) ELISA Kit (RTEB0869)
Bovine Cyclic AMP-responsive element-binding protein 1 (CREB1) ELISA Kit (BOEB0618)
Rat CREB1 (Cyclic AMP Response Element Binding Protein 1) ELISA Kit (AEES00373)
Mouse Iron-responsive element-binding protein 2 (Ireb2) ELISA Kit (MOEB1202)
Human Iron Responsive Element Binding Protein 2 (IREB2) ELISA Kit
Rat Iron Responsive Element Binding Protein 2 (IREB2) ELISA Kit
