null

Mouse Cubilin (Cubn) ELISA Kit (MOEB2432)

SKU:
MOEB2432
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q9JLB4
Range:
0.156-10 ng/mL
ELISA Type:
Sandwich
Reactivity:
Mouse
€649
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Mouse Cubilin (Cubn) ELISA Kit

The Mouse Cubilin (CUBN) ELISA Kit is a reliable and accurate assay designed for the detection of cubilin levels in mouse serum, plasma, and cell culture supernatants. This kit offers high sensitivity and specificity, ensuring robust and consistent results for a variety of research applications.Cubilin is a key protein involved in the transport of various substances, including vitamins and other nutrients, within the body.

Abnormalities in cubilin levels have been associated with various metabolic disorders and diseases, making it a crucial biomarker for studying these conditions and developing potential therapies.With its easy-to-use protocol and dependable performance, the Mouse Cubilin (CUBN) ELISA Kit is a valuable tool for researchers looking to further understand the role of cubilin in health and disease in mouse models.

Product Name:Mouse Cubilin (Cubn) ELISA Kit
SKU:MOEB2432
Size:96T
Target:Mouse Cubilin (Cubn)
Synonyms:Intrinsic factor-cobalamin receptor, Ifcr
Assay Type:Sandwich
Detection Method:ELISA
Reactivity:Mouse
Detection Range:0.156-10ng/mL
Sensitivity:0.082ng/mL
Intra CV:4.9%
Inter CV:6.4%
Linearity:
Sample1:21:41:81:16
Serum(N=5)98-107%92-102%109-119%97-110%
EDTA Plasma(N=5)94-103%116-125%104-115%84-95%
Heparin Plasma(N=5)116-126%93-102%104-113%106-116%
Recovery:
Sample TypeAverage(%)Recovery Range(%)
Serum8280-88
Plasma8480-90
Function:Cotransporter which plays a role in lipoprotein, vitamin and iron metabolism, by facilitating their uptake. Binds to ALB, MB, Kappa and lambda-light chains, TF, hemoglobin, GC, SCGB1A1, APOA1, high density lipoprotein, and the GIF-cobalamin complex. The binding of all ligands requires calcium. Serves as important transporter in several absorptive epithelia, including intestine, renal proximal tubules and embryonic yolk sac. Interaction with LRP2 mediates its trafficking throughout vesicles and facilitates the uptake of specific ligands like GC, hemoglobin, ALB, TF and SCGB1A1. Interaction with AMN controls its trafficking to the plasma membrane and facilitates endocytosis of ligands. May play an important role in the development of the peri-implantation embryo through internalization of APOA1 and cholesterol. Binds to LGALS3 at the maternal-fetal interface.
Uniprot:Q9JLB4
Sample Type:Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids
Specificity:Natural and recombinant mouse Cubilin
Sub Unit:Interacts with LRP2 in a dual-receptor complex in a calcium-dependent manner (By similarity). Component of the cubam complex composed of CUBN and AMN. The cubam complex can oligomerize and form cubam trimers. Found in a complex with PID1/PCLI1, LRP1 and CUBNI (By similarity). Interacts with LRP1 and PID1/PCLI1.
Research Area:Metabolism
Subcellular Location:Apical cell membrane Peripheral membrane protein Cell membrane Peripheral membrane protein Membrane Coated pit Endosome Lysosome membrane Peripheral membrane protein Colocalizes with AMN and LRP2 in the endocytotic apparatus of epithelial cells.
Storage:Please see kit components below for exact storage details
Note:For research use only
UniProt Protein Function:CUBN: Cotransporter which plays a role in lipoprotein, vitamin and iron metabolism, by facilitating their uptake. Binds to ALB, MB, Kappa and lambda-light chains, TF, hemoglobin, GC, SCGB1A1, APOA1, high density lipoprotein, and the GIF-cobalamin complex. The binding of all ligands requires calcium. Serves as important transporter in several absorptive epithelia, including intestine, renal proximal tubules and embryonic yolk sac. Interaction with LRP2 mediates its trafficking throughout vesicles and facilitates the uptake of specific ligands like GC, hemoglobin, ALB, TF and SCGB1A1. Interaction with AMN controls its trafficking to the plasma membrane and facilitates endocytosis of ligands. May play an important role in the development of the peri-implantation embryo through internalization of APOA1 and cholesterol. Binds to LGALS3 at the maternal-fetal interface. Defects in CUBN are a cause of recessive hereditary megaloblastic anemia 1 (RH-MGA1); also known as MGA1 Norwegian type or Imerslund-Grasbeck syndrome (I-GS). RH-MGA1 is due to selective malabsorption of vitamin B12. Defects in vitamin B12 absorption lead to impaired function of thymidine synthase. As a consequence DNA synthesis is interrupted. Rapidly dividing cells involved in erythropoiesis are particularly affected.Cellular Component: apical part of cell; apical plasma membrane; brush border; brush border membrane; coated pit; cytoplasm; endocytic vesicle; endoplasmic reticulum; endosome; Golgi apparatus; lysosomal lumen; lysosome; membrane; protein complexMolecular Function: calcium ion binding; cobalamin binding; cobalamin transporter activity; hemoglobin binding; identical protein binding; metal ion binding; protein binding; protein homodimerization activity; receptor activityBiological Process: cholesterol metabolic process; cobalamin transport; hemoglobin import; in utero embryonic development; lipid metabolic process; lipoprotein transport; protein transport; receptor-mediated endocytosis; response to nutrient; steroid metabolic process; transport
UniProt Protein Details:
NCBI Summary:
UniProt Code:Q9JLB4
NCBI GenInfo Identifier:124487348
NCBI Gene ID:65969
NCBI Accession:NP_001074553.1
UniProt Secondary Accession:Q9JLB4,B1AX10
UniProt Related Accession:Q9JLB4
Molecular Weight:399,097 Da
NCBI Full Name:cubilin
NCBI Synonym Full Names:cubilin (intrinsic factor-cobalamin receptor)
NCBI Official Symbol:Cubn
NCBI Official Synonym Symbols:AA408369; AL022750; D2Wsu88e
NCBI Protein Information:cubilin
UniProt Protein Name:Cubilin
UniProt Synonym Protein Names:Intrinsic factor-cobalamin receptor
Protein Family:Cubilin
UniProt Gene Name:Cubn
UniProt Entry Name:CUBN_MOUSE
Component Quantity (96 Assays) Storage
ELISA Microplate (Dismountable) 8×12 strips -20°C
Lyophilized Standard 2 -20°C
Sample Diluent 20ml -20°C
Assay Diluent A 10mL -20°C
Assay Diluent B 10mL -20°C
Detection Reagent A 120µL -20°C
Detection Reagent B 120µL -20°C
Wash Buffer 30mL 4°C
Substrate 10mL 4°C
Stop Solution 10mL 4°C
Plate Sealer 5 -

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir

*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.

Step
1. Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C.
2. Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform.
3. Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper.
4. Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C.
5. Repeat the wash process for five times as conducted in step 3.
6. Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction.
7. Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
8. Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters.
9. After experiment, store all reagents according to the specified storage temperature respectively until their expiry.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products