Mouse COL3 / Collagen III ELISA Kit
- SKU:
- MOFI00737
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P08121
- Sensitivity:
- 0.375ng/ml
- Range:
- 0.625-40ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- COL3, COL3alpha1, COL3A1, EDS4A, COL3A1, EDS4A, alpha1, III collagen, Collagen 3, collagen alpha-1, III chain, collagen, fetal, collagen, type III, alpha 1, Collagen-3, EDS4A, Ehlers-Danlos syndrome type IV, autosomal dominant
- Reactivity:
- Mouse
Description
Mouse COL3/Collagen III ELISA Kit
The Mouse Col3 (Collagen III) ELISA Kit is specifically designed for the precise quantification of collagen III levels in mouse serum, plasma, and cell culture supernatants. This kit offers exceptional sensitivity and specificity, guaranteeing accurate and consistent results, making it perfect for various research purposes.Collagen III is a vital component of the extracellular matrix, supporting tissue structure and function.
Abnormal levels of collagen III have been linked to various diseases, including fibrosis, cardiovascular disorders, and skin aging. Studying collagen III levels can provide valuable insights into these conditions and aid in the development of targeted treatments.Get your hands on the Mouse Col3 (Collagen III) ELISA Kit today and unlock the potential of collagen III research in mouse models.
| Product Name: | Mouse COL3 / Collagen III ELISA Kit |
| Product Code: | MOFI00737 |
| Size: | 96 Assays |
| Alias: | COL3, COL3alpha1, COL3A1, EDS4A, COL3A1, EDS4A, alpha1, III collagen, Collagen 3, collagen alpha-1, III chain, collagen, fetal, collagen, type III, alpha 1, Collagen-3, EDS4A, Ehlers-Danlos syndrome type IV, autosomal dominant |
| Detection Method: | Sandwich ELISA |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Mouse COL3 concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 0.375ng/ml |
| Range: | 0.625-40ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Mouse COL3 and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse COL3 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse COL3 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| Intra Assay: | CV <8% | ||||||||||||||||
| Inter Assay: | CV <10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8-12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | P08121 |
| UniProt Protein Function: | CO3A1: Collagen type III occurs in most soft connective tissues along with type I collagen. Defects in COL3A1 are a cause of Ehlers-Danlos syndrome type 3 (EDS3); also known as benign hypermobility syndrome. EDS is a connective tissue disorder characterized by hyperextensible skin, atrophic cutaneous scars due to tissue fragility and joint hyperlaxity. EDS3 is a form of Ehlers-Danlos syndrome characterized by marked joint hyperextensibility without skeletal deformity. Defects in COL3A1 are the cause of Ehlers-Danlos syndrome type 4 (EDS4). EDS is a connective tissue disorder characterized by hyperextensible skin, atrophic cutaneous scars due to tissue fragility and joint hyperlaxity. EDS4 is the most severe form of the disease. It is characterized by the joint and dermal manifestations as in other forms of the syndrome, characteristic facial features (acrogeria) in most patients, and by proneness to spontaneous rupture of bowel and large arteries. The vascular complications may affect all anatomical areas. Defects in COL3A1 are a cause of susceptibility to aortic aneurysm abdominal (AAA). AAA is a common multifactorial disorder characterized by permanent dilation of the abdominal aorta, usually due to degenerative changes in the aortic wall. Histologically, AAA is characterized by signs of chronic inflammation, destructive remodeling of the extracellular matrix, and depletion of vascular smooth muscle cells. Belongs to the fibrillar collagen family. 2 isoforms of the human protein are produced by alternative splicing. Protein type: Cell adhesion; Extracellular matrix; Motility/polarity/chemotaxis; Secreted; Secreted, signal peptide Chromosomal Location of Human Ortholog: 1 C1.1|1 23.67 cM Cellular Component: collagen; collagen type III trimer; extracellular matrix; extracellular region; extracellular space; proteinaceous extracellular matrix Molecular Function: extracellular matrix structural constituent; integrin binding; metal ion binding; platelet-derived growth factor binding; protease binding; SMAD binding Biological Process: blood vessel development; cell-matrix adhesion; cerebral cortex development; collagen fibril organization; gut development; heart development; integrin-mediated signaling pathway; negative regulation of immune response; negative regulation of neuron migration; peptide cross-linking; positive regulation of Rho protein signal transduction; response to cytokine; response to radiation; skin development; transforming growth factor beta receptor signaling pathway; wound healing |
| UniProt Protein Details: | |
| NCBI Summary: | This gene encodes the alpha-1 subunit of the fibril-forming type III collagen found in bone, cartilage, dentin, tendon, bone marrow stroma and other connective tissue. The encoded protein forms homotrimeric type III procollagen that undergoes proteolytic processing during fibril formation. A majority of mice lacking the encoded protein die within two days of birth but about 5% of the animals survive to adulthood. The surviving mice exhibit severe cortical malformation and experience significantly shorter lifespan. The mutant mouse named "tight skin 2" exhibiting systemic sclerosis phenotype was found to harbor a missense point mutation in this gene. A pseudogene of this gene has been defined on chromosome 8. [provided by RefSeq, Nov 2015] |
| UniProt Code: | P08121 |
| NCBI GenInfo Identifier: | 226423933 |
| NCBI Gene ID: | 12825 |
| NCBI Accession: | NP_034060.2 |
| UniProt Secondary Accession: | P08121,Q61429, Q9CRN7 |
| UniProt Related Accession: | P08121 |
| Molecular Weight: | |
| NCBI Full Name: | collagen alpha-1(III) chain preproprotein |
| NCBI Synonym Full Names: | collagen, type III, alpha 1 |
| NCBI Official Symbol: | Col3a1Â Â |
| NCBI Official Synonym Symbols: | Tsk2; Tsk-2; Col3a-1; AW550625Â Â |
| NCBI Protein Information: | collagen alpha-1(III) chain |
| UniProt Protein Name: | Collagen alpha-1(III) chain |
| UniProt Synonym Protein Names: | |
| Protein Family: | |
| UniProt Gene Name: | Col3a1Â Â |
| UniProt Entry Name: |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
| Step | Procedure |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum: | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma: | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 - g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid: | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant: | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates: | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C. |
| Tissue homogenates: | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates: | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk: | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Mouse COL3 (Collagen Type III) ELISA Kit (MOES00880)
Mouse COL3 (Collagen Type III) CLIA Kit (MOES00188)
Rat COL3 alpha1 (Collagen Type III Alpha 1) ELISA Kit (RTES00817)
Mouse Collagen Type III Alpha 1 (COL3a1) ELISA Kit
Mouse Collagen alpha-1 (III)chain (Col3a1) ELISA Kit (MOEB0161)
Rat COL3 (Collagen Type â…¢) ELISA Kit (AEES00360)
Human COL3 (Collagen Type â…¢) ELISA Kit (AEES00085)
