null

Mouse Aminopeptidase N / CD13 ELISA Kit

SKU:
MOFI00612
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P97449
Sensitivity:
0.469ng/ml
Range:
0.781-50ng/ml
ELISA Type:
Sandwich
Synonyms:
Anpep, CD13, AAP, Aminopeptidase N,, ANPEP, APN, GP150, LAP1, P150, PEPN
Reactivity:
Mouse
Research Area:
Cardiovascular
€649
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Mouse Aminopeptidase N/CD13 ELISA Kit

The Mouse Aminopeptidase N (CD13) ELISA Kit offered by Assay Genie is a powerful tool for accurately measuring levels of aminopeptidase N (CD13) in mouse serum, plasma, and cell culture supernatants. This kit has been optimized for high sensitivity and specificity, ensuring precise and dependable results for a variety of research applications.Aminopeptidase N (CD13) is a key enzyme involved in the metabolism of peptides and proteins, playing a critical role in various physiological processes.

It is implicated in inflammation, tumor progression, and immune regulation, making it a valuable biomarker for studying these conditions and exploring potential therapeutic interventions.With the Assay Genie Mouse Aminopeptidase N (CD13) ELISA Kit, researchers can accurately quantify levels of this important enzyme in mouse samples, facilitating in-depth studies and advancements in various fields of research.

Product Name:Mouse Aminopeptidase N / CD13 ELISA Kit
Product Code:MOFI00612
Size:96 Assays
Alias:Anpep, CD13, AAP, Aminopeptidase N, ANPEP, APN, GP150, LAP1, P150, PEPN
Detection Method:Sandwich ELISA
Application:This immunoassay kit allows for the in vitro quantitative determination of Mouse Anpep concentrations in serum plasma and other biological fluids.
Sensitivity:0.469ng/ml
Range:0.781-50ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery: Matrices listed below were spiked with certain level of Mouse Anpep and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse Anpep in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)97-104100
EDTA plasma(n=5)90-10195
UFH plasma(n=5)86-10494
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse Anpep and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)85-100%89-105%86-105%
EDTA plasma(n=5)82-100%85-96%83-100%
UFH plasma(n=5)87-100%80-92%80-100%
Intra Assay:CV <8%
Inter Assay:CV <10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8-12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotP97449
UniProt Protein Function:CD13: Broad specificity aminopeptidase. Plays a role in the final digestion of peptides generated from hydrolysis of proteins by gastric and pancreatic proteases. May play a critical role in the pathogenesis of cholesterol gallstone disease. May be involved in the metabolism of regulatory peptides of diverse cell types including small intestinal and tubular epithelial cells, macrophages, granulocytes and synaptic membranes from the CNS. Found to cleave antigen peptides bound to major histocompatibility complex class II molecules of presenting cells and to degrade neurotransmitters at synaptic junctions. Is also implicated as a regulator of IL-8 bioavailability in the endometrium, and therefore may contribute to the regulation of angiogenesis. Is used as a marker for acute myeloid leukemia and plays a role in tumor invasion. In case of human coronavirus 229E (HCoV-229E) infection, serves as receptor for HCoV-229E spike glycoprotein. Mediates as well human cytomegalovirus (HCMV) infection. Belongs to the peptidase M1 family.
UniProt Protein Details:

Protein type:EC 3.4.11.2; Protease; Receptor, misc.; Other Amino Acids Metabolism - glutathione; Membrane protein, integral

Cellular Component: extracellular space; membrane; lysosomal membrane; integral to membrane; ER-Golgi intermediate compartment; vesicle membrane; external side of plasma membrane

Molecular Function:peptidase activity; metallopeptidase activity; zinc ion binding; hydrolase activity; metal ion binding; aminopeptidase activity; peptide binding

Biological Process: multicellular organismal development; aromatic compound metabolic process; angiogenesis; cell differentiation; proteolysis

UniProt Code:P97449
NCBI GenInfo Identifier:31077182
NCBI Gene ID:16790
NCBI Accession:P97449.4
UniProt Related Accession:P97449
Molecular Weight:Molecular Mass: 103.6 kDaActual Protein Molecular Mass: 110-130 kDa
NCBI Full Name:Aminopeptidase N
NCBI Synonym Full Names:alanyl (membrane) aminopeptidase
NCBI Official Symbol:Anpep  
NCBI Official Synonym Symbols:Apn; AP-M; AP-N; Cd13; P150  
NCBI Protein Information:aminopeptidase N
UniProt Protein Name:Aminopeptidase N
UniProt Synonym Protein Names:Alanyl aminopeptidase; Aminopeptidase M; AP-M; Membrane protein p161; Microsomal aminopeptidase; CD_antigen: CD13
UniProt Gene Name:Anpep  
UniProt Entry Name:AMPN_MOUSE

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

Plasma:

Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 - g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.

Urine & Cerebrospinal Fluid:

Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.

Cell culture supernatant:

Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.

Cell lysates:

Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.

Tissue homogenates:

The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.

Tissue lysates:

Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.

Breast Milk:

Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products