Human ZFHX3 ELISA Kit (HUFI00941)
- SKU:
- HUFI00941
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- Q15911
- Sensitivity:
- 46.875pg/ml
- Range:
- 78.125-5000pg/ml
- ELISA Type:
- Sandwich
- Synonyms:
- ZFHX3, Zinc finger homeobox protein 3, Zinc finger homeodomain protein 3, ZFH-3, Alpha-fetoprotein enhancer-binding protein, AT motif-binding factor, AT-binding transcription factor 1
- Reactivity:
- Human
- Research Area:
- Cardiovascular
Description
Human ZFHX3 ELISA Kit
The Human ZFHX3 ELISA Kit is specifically designed for the precise detection of ZFHX3 levels in human serum, plasma, and cell culture supernatants. This ELISA kit offers exceptional sensitivity and specificity, guaranteeing consistent and accurate results for a variety of research purposes.ZFHX3, also known as ATBF1, is a transcription factor that plays a crucial role in regulating gene expression and cellular processes. Dysregulation of ZFHX3 has been associated with various diseases, including cancer, cardiovascular disorders, and neurological conditions, making it a valuable biomarker for studying these diseases and developing potential therapeutic interventions.
With its user-friendly protocol and reliable performance, the Human ZFHX3 ELISA Kit from Assay Genie is a valuable tool for researchers investigating the role of ZFHX3 in health and disease. Order now to advance your research and unlock new insights into ZFHX3 biology.
| Product Name: | Human ZFHX3 ELISA Kit |
| Product Code: | HUFI00941 |
| Size: | 96 Assays |
| Alias: | ZFHX3, Zinc finger homeobox protein 3, Zinc finger homeodomain protein 3, ZFH-3, Alpha-fetoprotein enhancer-binding protein, AT motif-binding factor, AT-binding transcription factor 1 |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human ZFHX3 concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 46.875pg/ml |
| Range: | 78.125-5000pg/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human ZFHX3 and the recovery rates were calculated by comparing the measured value to the expected amount of Human ZFHX3 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human ZFHX3 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | Q15911 |
| UniProt Protein Function: | ATBF1: Transcriptional repressor. It inhibits the enhancer element of the AFP gene by binding to its AT-rich core sequence. Regulator of myoblasts differentiation through the binding to the AT-rich sequence of MYF6 promoter and promoter repression. Down- regulates the MUC5AC promoter in gastric cancer. 2 isoforms of the human protein are produced by alternative splicing. |
| UniProt Protein Details: | Protein type:Cell development/differentiation; C2H2-type zinc finger protein; DNA-binding; Mitochondrial; Transcription factor Chromosomal Location of Human Ortholog: 16q22.3 Cellular Component: nucleoplasm; transcription factor complex; intracellular membrane-bound organelle; mitochondrion; nucleolus; nucleus Molecular Function:RNA polymerase II transcription factor activity, enhancer binding; enzyme binding; zinc ion binding; sequence-specific DNA binding; transcription factor activity Biological Process: transcription from RNA polymerase II promoter; muscle development; regulation of transcription, DNA-dependent; regulation of neuron differentiation; negative regulation of transcription from RNA polymerase II promoter; brain development; negative regulation of transcription, DNA-dependent; cell cycle arrest; negative regulation of myoblast differentiation; positive regulation of myoblast differentiation Disease: Prostate Cancer |
| NCBI Summary: | This gene encodes a transcription factor with multiple homeodomains and zinc finger motifs, and regulates myogenic and neuronal differentiation. The encoded protein suppresses expression of the alpha-fetoprotein gene by binding to an AT-rich enhancer motif. The protein has also been shown to negatively regulate c-Myb, and transactivate the cell cycle inhibitor cyclin-dependent kinase inhibitor 1A (also known as p21CIP1). This gene is reported to function as a tumor suppressor in several cancers, and sequence variants of this gene are also associated with atrial fibrillation. Multiple transcript variants expressed from alternate promoters and encoding different isoforms have been found for this gene. [provided by RefSeq, Sep 2009] |
| UniProt Code: | Q15911 |
| NCBI GenInfo Identifier: | 258613987 |
| NCBI Gene ID: | 463 |
| NCBI Accession: | NP_001158238.1 |
| UniProt Secondary Accession: | Q15911,O15101, Q13719, D3DWS8, |
| UniProt Related Accession: | Q15911 |
| Molecular Weight: | |
| NCBI Full Name: | zinc finger homeobox protein 3 isoform B |
| NCBI Synonym Full Names: | zinc finger homeobox 3 |
| NCBI Official Symbol: | ZFHX3 |
| NCBI Official Synonym Symbols: | ATBT; ATBF1; ZNF927 |
| NCBI Protein Information: | zinc finger homeobox protein 3 |
| UniProt Protein Name: | Zinc finger homeobox protein 3 |
| UniProt Synonym Protein Names: | AT motif-binding factor 1; AT-binding transcription factor 1; Alpha-fetoprotein enhancer-binding protein; Zinc finger homeodomain protein 3; ZFH-3 |
| Protein Family: | Zinc finger homeobox protein |
| UniProt Gene Name: | ZFHX3 |
| UniProt Entry Name: | ZFHX3_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human Zinc finger homeobox protein 3 (ZFHX3) ELISA Kit (HUEB1049)
Mouse Zinc finger homeobox protein 3 (Zfhx3) ELISA Kit (MOEB0819)
Human BRAF ELISA Kit
Human ANGPT1 ELISA Kit
