Human USO1 (Protein USO1 homolog) ELISA Kit (HUFI07377)
- SKU:
- HUFI07377
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- O60763
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- P115, Protein USO1 homolog, TAP, USO1, VDP, Vesicle docking protein
- Reactivity:
- Human
Description
Human USO1 (Protein USO1 homolog) ELISA Kit (HUFI07377)
The Human USO1 (USO1 Homolog) ELISA Kit is a cutting-edge tool for the precise measurement of USO1 protein levels in human serum, plasma, and cell culture supernatants. This advanced kit offers exceptional sensitivity and specificity, guaranteeing accurate and consistent results for various research purposes.USO1 Homolog is a vital protein associated with intracellular transport and vesicle trafficking, contributing to cellular processes such as protein secretion and organelle biogenesis. Dysregulation of USO1 Homolog has been linked to various diseases, including neurodevelopmental disorders and metabolic syndromes, making it a valuable biomarker for investigating these conditions and potentially identifying therapeutic targets.
With its reliable performance and versatility, the Human USO1 (USO1 Homolog) ELISA Kit is a valuable tool for researchers in the fields of biology, medicine, and drug discovery seeking to unravel the complexities of USO1 protein function and its implications in disease pathogenesis.
| Product Name: | Human USO1 (Protein USO1 homolog) ELISA Kit |
| Product Code: | HUFI07377 |
| Size: | 96 Assays |
| Alias: | P115 ELISA Kit, Protein USO1 homolog ELISA Kit, TAP ELISA Kit, USO1 ELISA Kit, VDP ELISA Kit, Vesicle docking protein ELISA Kit |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human USO1 (Protein USO1 homolog) concentrations in serum plasma and other biological fluids. |
| Sensitivity: | < 0.094ng/ml |
| Range: | 0.156-10ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human USO1 (Protein USO1 homolog) and the recovery rates were calculated by comparing the measured value to the expected amount of Human USO1 (Protein USO1 homolog) in samples. Enquire for more information. |
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human USO1 (Protein USO1 homolog) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. Enquire for more information. |
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| UniProt Protein Function: | TAP: General vesicular transport factor required for intercisternal transport in the Golgi stack; it is required for transcytotic fusion and/or subsequent binding of the vesicles to the target membrane. May well act as a vesicular anchor by interacting with the target membrane and holding the vesicular and target membranes in proximity. Belongs to the VDP/USO1/EDE1 family. 2 isoforms of the human protein are produced by alternative splicing. |
| UniProt Protein Details: | Protein type:Motility/polarity/chemotaxis; Vesicle Chromosomal Location of Human Ortholog: 4q21.1 Cellular Component: Golgi membrane; Golgi apparatus; Golgi stack; membrane; endoplasmic reticulum; perinuclear region of cytoplasm; nucleolus; cytosol Molecular Function:protein transporter activity Biological Process: intracellular protein transport; ER to Golgi vesicle-mediated transport; Golgi vesicle docking; vesicle fusion with Golgi apparatus; transcytosis; mitotic cell cycle |
| NCBI Summary: | The protein encoded by this gene is a peripheral membrane protein which recycles between the cytosol and the Golgi apparatus during interphase. It is regulated by phosphorylation: dephosphorylated protein associates with the Golgi membrane and dissociates from the membrane upon phosphorylation. Ras-associated protein 1 recruits this protein to coat protein complex II (COPII) vesicles during budding from the endoplasmic reticulum, where it interacts with a set of COPII vesicle-associated SNAREs to form a cis-SNARE complex that promotes targeting to the Golgi apparatus. Alternative splicing results in multiple transcript variants. [provided by RefSeq, Feb 2014] |
| UniProt Code: | O60763 |
| NCBI GenInfo Identifier: | 143743108 |
| NCBI Gene ID: | 8615 |
| NCBI Accession: | O60763.2 |
| UniProt Related Accession: | O60763 |
| Molecular Weight: | |
| NCBI Full Name: | General vesicular transport factor p115 |
| NCBI Synonym Full Names: | USO1 vesicle transport factor |
| NCBI Official Symbol: | USO1 |
| NCBI Official Synonym Symbols: | TAP; VDP; P115 |
| NCBI Protein Information: | general vesicular transport factor p115 |
| UniProt Protein Name: | General vesicular transport factor p115 |
| UniProt Synonym Protein Names: | Protein USO1 homolog; Transcytosis-associated protein; TAP; Vesicle-docking protein |
| Protein Family: | Tripeptidyl aminopeptidase |
| UniProt Gene Name: | USO1 |
| UniProt Entry Name: | USO1_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37 °C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37 °C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37 °C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37 °C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
USO1 Rabbit Polyclonal Antibody (CAB16079)
€139 - €419
Human NOTUM / Protein notum homolog ELISA Kit (HUFI01515)
€599
Human PELO (Protein pelota homolog) ELISA Kit (HUFI07273)
€599
Human ATOH1 / Protein atonal homolog 1 ELISA Kit (HUFI00587)
€599
Human IGIP / IgA-inducing protein homolog ELISA Kit (HUFI02120)
€599
Human Protein notum homolog (NOTUM) ELISA Kit (HUEB1779)
€649
Human Mdm2 p53 Binding Protein Homolog (MDM2) ELISA Kit (HUDL01824)
€649