Human UBR4 / E3 ubiquitin-protein ligase ELISA Kit
- SKU:
- HUFI00545
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- Q5T4S7
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- UBR4, E3 ubiquitin-protein ligase UBR4, RBAF600, p600, N-recognin-4, Zinc finger UBR1-type protein 1, Retinoblastoma-associated factor of 600 kDa, 600 kDa retinoblastoma protein-associated factor
- Reactivity:
- Human
- Research Area:
- Immunology
Frequently bought together:
Description
Human UBR4/E3 ubiquitin-protein ligase ELISA Kit
The Human UBR4 (E3 Ubiquitin Protein Ligase) ELISA Kit is specifically designed for the precise measurement of UBR4 levels in human samples such as serum, plasma, and cell culture supernatants. This kit offers exceptional sensitivity and specificity, ensuring accurate and consistent results for a variety of research applications.UBR4 is an E3 ubiquitin ligase that plays a crucial role in protein degradation through the ubiquitin-proteasome pathway. Dysregulation of UBR4 has been linked to various diseases, including cancer, neurodegenerative disorders, and autoimmune conditions, highlighting its importance as a potential therapeutic target.
By utilizing the Human UBR4 ELISA Kit, researchers can investigate the role of UBR4 in disease pathogenesis, identify potential biomarkers, and develop targeted therapies for conditions associated with UBR4 dysfunction. This kit provides a reliable tool for studying the intricate mechanisms of protein degradation and ubiquitination pathways in human health and disease.
| Product Name: | Human UBR4 / E3 ubiquitin-protein ligase ELISA Kit |
| Product Code: | HUFI00545 |
| Size: | 96 Assays |
| Alias: | UBR4, E3 ubiquitin-protein ligase UBR4, RBAF600, p600, N-recognin-4, Zinc finger UBR1-type protein 1, Retinoblastoma-associated factor of 600 kDa, 600 kDa retinoblastoma protein-associated factor |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human UBR4 concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 0.094ng/ml |
| Range: | 0.156-10ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human UBR4 and the recovery rates were calculated by comparing the measured value to the expected amount of Human UBR4 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human UBR4 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | Q5T4S7 |
| UniProt Protein Function: | UBR4: E3 ubiquitin-protein ligase which is a component of the N-end rule pathway. Recognizes and binds to proteins bearing specific N-terminal residues that are destabilizing according to the N-end rule, leading to their ubiquitination and subsequent degradation. Together with clathrin, forms meshwork structures involved in membrane morphogenesis and cytoskeletal organization. Regulates integrin-mediated signaling. May play a role in activation of FAK in response to cell-matrix interactions. Belongs to the UBR4 family. 6 isoforms of the human protein are produced by alternative splicing. |
| UniProt Protein Details: | Protein type:EC 6.3.2.-; EC 6.3.2.19; Ligase; Membrane protein, integral; Membrane protein, multi-pass; Ubiquitin conjugating system; Ubiquitin ligase Chromosomal Location of Human Ortholog: 1p36.13 Cellular Component: centrosome; cytosol; membrane; nucleoplasm; plasma membrane Molecular Function:protein binding; ubiquitin-protein ligase activity Biological Process: neutrophil degranulation; protein ubiquitination during ubiquitin-dependent protein catabolic process |
| NCBI Summary: | The protein encoded by this gene is an E3 ubiquitin-protein ligase that interacts with the retinoblastoma-associated protein in the nucleus and with calcium-bound calmodulin in the cytoplasm. The encoded protein appears to be a cytoskeletal component in the cytoplasm and part of the chromatin scaffold in the nucleus. In addition, this protein is a target of the human papillomavirus type 16 E7 oncoprotein. [provided by RefSeq, Aug 2010] |
| UniProt Code: | Q5T4S7 |
| NCBI GenInfo Identifier: | 74744979 |
| NCBI Gene ID: | 23352 |
| NCBI Accession: | Q5T4S7.1 |
| UniProt Secondary Accession: | Q5T4S7,O60646, O75050, Q4QRK5, Q5T4S8, Q5T4S9, Q5TBN8 Q5TBP2, Q6DKH8, A8MPT2, A8MQ33, A8MQB1, |
| UniProt Related Accession: | Q5T4S7 |
| Molecular Weight: | 574kDa |
| NCBI Full Name: | E3 ubiquitin-protein ligase UBR4 |
| NCBI Synonym Full Names: | ubiquitin protein ligase E3 component n-recognin 4 |
| NCBI Official Symbol: | UBR4 |
| NCBI Official Synonym Symbols: | p600; ZUBR1; RBAF600 |
| NCBI Protein Information: | E3 ubiquitin-protein ligase UBR4 |
| UniProt Protein Name: | E3 ubiquitin-protein ligase UBR4 |
| UniProt Synonym Protein Names: | 600 kDa retinoblastoma protein-associated factor; N-recognin-4; RING-type E3 ubiquitin transferase UBR4; Retinoblastoma-associated factor of 600 kDa; RBAF600; p600; Zinc finger UBR1-type protein 1 |
| Protein Family: | E3 ubiquitin-protein ligase |
| UniProt Gene Name: | UBR4 |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human E3 ubiquitin-protein ligase UBR4 (UBR4) ELISA Kit (HUEB0470)
$779
Rat E3 ubiquitin-protein ligase UBR4 (Ubr4) ELISA Kit (RTEB0141)
$779
Mouse E3 ubiquitin-protein ligase UBR4 (Ubr4) ELISA Kit (MOEB0175)
$779
Human Ubiquitin Protein Ligase E3 Component N-Recognin 4 (UBR4) ELISA Kit
$899
Human E3 ubiquitin-protein ligase ELISA Kit
$719
Human AMFR / E3 ubiquitin-protein ligase ELISA Kit
$719
Mouse E3 ubiquitin-protein ligase ELISA Kit
$779
Rat E3 ubiquitin-protein ligase ELISA Kit
$779