Human Type-2 angiotensin II receptor (AGTR2) ELISA Kit (HUEB0919)
- SKU:
- HUEB0919
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P50052
- Range:
- 1.56-100 pg/mL
- ELISA Type:
- Sandwich
- Reactivity:
- Human
Description
Human Type-2 angiotensin II receptor (AGTR2) ELISA Kit
The Human Type 2 Angiotensin II Receptor (AGTR2) ELISA Kit is a powerful tool for detecting levels of AGTR2 in human samples such as serum, plasma, and cell culture supernatants. This kit offers high sensitivity and specificity, ensuring accurate and consistent results for various research applications.AGTR2 is an important receptor involved in the regulation of blood pressure and cardiovascular function. Dysregulation of AGTR2 has been linked to cardiovascular diseases, hypertension, and other health conditions.
By measuring AGTR2 levels, researchers can gain valuable insights into the role of this receptor in disease pathogenesis and potential therapeutic targets.Overall, the Human Type 2 Angiotensin II Receptor ELISA Kit is a valuable resource for studying the role of AGTR2 in health and disease, providing researchers with a reliable tool for biomarker analysis and drug development.
Product Name: | Human Type-2 angiotensin II receptor (AGTR2) ELISA Kit |
SKU: | HUEB0919 |
Size: | 96T |
Target: | Human Type-2 angiotensin II receptor (AGTR2) |
Synonyms: | Angiotensin II type-2 receptor, AT2 |
Assay Type: | Sandwich |
Detection Method: | ELISA |
Reactivity: | Human |
Detection Range: | 1.56-100pg/mL |
Sensitivity: | 0.78pg/mL |
Intra CV: | 6.3% | ||||||||||||||||||||
Inter CV: | 7.6% | ||||||||||||||||||||
Linearity: |
| ||||||||||||||||||||
Recovery: |
| ||||||||||||||||||||
Function: | Receptor for angiotensin II. Cooperates with MTUS1 to inhibit ERK2 activation and cell proliferation. |
Uniprot: | P50052 |
Sample Type: | Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids |
Specificity: | Natural and recombinant human Type-2 angiotensin II receptor |
Sub Unit: | Interacts with MTUS1. |
Research Area: | Cancer |
Subcellular Location: | Cell membrane Multi-pass membrane protein |
Storage: | Please see kit components below for exact storage details |
Note: | For research use only |
UniProt Protein Function: | AT2: Receptor for angiotensin II. Cooperates with MTUS1 to inhibit ERK2 activation and cell proliferation. Defects in AGTR2 are the cause of mental retardation X- linked type 88 (MRX88). Mental retardation is characterized by significantly below average general intellectual functioning associated with impairments in adaptative behavior and manifested during the developmental period. Belongs to the G-protein coupled receptor 1 family. |
UniProt Protein Details: | Protein type:Membrane protein, multi-pass; GPCR, family 1; Membrane protein, integral; Receptor, GPCR Chromosomal Location of Human Ortholog: Xq22-q23 Cellular Component: integral to plasma membrane; perinuclear region of cytoplasm; extracellular region; plasma membrane Molecular Function:protein binding; receptor antagonist activity; angiotensin type II receptor activity; peptide hormone binding; transcription factor binding Biological Process: positive regulation of phosphoprotein phosphatase activity; negative regulation of icosanoid secretion; regulation of transcription factor import into nucleus; positive regulation of nitric oxide biosynthetic process; negative regulation of heart rate; negative regulation of nerve growth factor receptor signaling pathway; positive regulation of transcription, DNA-dependent; renin-angiotensin regulation of aldosterone production; dopamine biosynthetic process; positive regulation of vasodilation; angiotensin mediated vasodilation involved in regulation of systemic arterial blood pressure; cerebellar cortex development; cell surface receptor linked signal transduction; regulation of systemic arterial blood pressure by circulatory renin-angiotensin; regulation of blood pressure; positive regulation of cell proliferation; inflammatory response; cellular sodium ion homeostasis; positive regulation of nitric-oxide synthase activity; negative regulation of blood vessel endothelial cell migration; response to organic nitrogen; brain renin-angiotensin system; G-protein coupled receptor protein signaling pathway; negative regulation of fibroblast proliferation; G-protein signaling, coupled to cGMP nucleotide second messenger; blood vessel remodeling; brain development; negative regulation of cell growth; nitric oxide mediated signal transduction; positive regulation of cytokine secretion |
NCBI Summary: | The protein encoded by this gene belongs to the G-protein coupled receptor 1 family, and functions as a receptor for angiotensin II. It is an intergral membrane protein that is highly expressed in fetus, but scantily in adult tissues, except brain, adrenal medulla, and atretic ovary. This receptor has been shown to mediate programmed cell death and this apoptotic function may play an important role in developmental biology and pathophysiology. Mutations in this gene are been associated with X-linked mental retardation. [provided by RefSeq, Jan 2010] |
UniProt Code: | P50052 |
NCBI GenInfo Identifier: | 1703214 |
NCBI Gene ID: | 186 |
NCBI Accession: | P50052.1 |
UniProt Secondary Accession: | P50052,Q13016, Q6FGY7, B2R9V1, |
UniProt Related Accession: | P50052,AAB34100 |
Molecular Weight: | 363 |
NCBI Full Name: | Type-2 angiotensin II receptor |
NCBI Synonym Full Names: | angiotensin II receptor, type 2 |
NCBI Official Symbol: | AGTR2 |
NCBI Official Synonym Symbols: | AT2; ATGR2; MRX88 |
NCBI Protein Information: | type-2 angiotensin II receptor; angiotensin II type-2 receptor |
UniProt Protein Name: | Type-2 angiotensin II receptor |
UniProt Synonym Protein Names: | Angiotensin II type-2 receptor; AT2 |
Protein Family: | Probable long-chain-alcohol O-fatty-acyltransferase |
UniProt Gene Name: | AGTR2 |
UniProt Entry Name: | AGTR2_HUMAN |
Component | Quantity (96 Assays) | Storage |
ELISA Microplate (Dismountable) | 8×12 strips | -20°C |
Lyophilized Standard | 2 | -20°C |
Sample Diluent | 20ml | -20°C |
Assay Diluent A | 10mL | -20°C |
Assay Diluent B | 10mL | -20°C |
Detection Reagent A | 120µL | -20°C |
Detection Reagent B | 120µL | -20°C |
Wash Buffer | 30mL | 4°C |
Substrate | 10mL | 4°C |
Stop Solution | 10mL | 4°C |
Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.
Step | |
1. | Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C. |
2. | Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform. |
3. | Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper. |
4. | Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C. |
5. | Repeat the wash process for five times as conducted in step 3. |
6. | Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction. |
7. | Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing. |
8. | Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters. |
9. | After experiment, store all reagents according to the specified storage temperature respectively until their expiry. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
Sample Type | Protocol |
Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |