null

Human TNFAIP2 / Tumor necrosis factor alpha-induced protein 2 ELISA Kit

SKU:
HUFI02138
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q03169
Sensitivity:
0.094ng/ml
Range:
0.156-10ng/ml
ELISA Type:
Sandwich
Synonyms:
TNFAIP2, TNF alpha-induced protein 2, Primary response gene B94 protein
Reactivity:
Human
Research Area:
Cardiovascular
$719
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Human TNFAIP2/Tumor necrosis factor alpha-induced protein 2 ELISA Kit

The Human TNFAIP2 (Tumor Necrosis Factor Alpha Induced Protein 2) ELISA Kit is specifically designed for the accurate measurement of TNFAIP2 levels in human samples such as serum, plasma, and cell culture supernatants. This kit is highly sensitive and specific, ensuring precise and reproducible results, making it an indispensable tool for a variety of research applications.TNFAIP2 is a key protein that is induced by tumor necrosis factor alpha (TNF-alpha) and is involved in various cellular processes including inflammation, immunity, and cell survival.

Dysregulation of TNFAIP2 has been implicated in various diseases such as cancer, autoimmune disorders, and inflammatory conditions, highlighting its significance as a potential biomarker for disease monitoring and therapeutic development.Overall, the Human TNFAIP2 ELISA Kit offers researchers a reliable and efficient method for quantifying TNFAIP2 levels in human samples, providing valuable insights into the role of this protein in health and disease.

Product Name:Human TNFAIP2 / Tumor necrosis factor alpha-induced protein 2 ELISA Kit
Product Code:HUFI02138
Size:96 Assays
Alias:TNFAIP2, TNF alpha-induced protein 2, Primary response gene B94 protein
Detection method:Sandwich ELISA, Double Antibody
Application:This immunoassay kit allows for the in vitro quantitative determination of Human TNFAIP2 concentrations in serum plasma and other biological fluids.
Sensitivity:0.094ng/ml
Range:0.156-10ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Human TNFAIP2 and the recovery rates were calculated by comparing the measured value to the expected amount of Human TNFAIP2 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)85-10592
EDTA plasma(n=5)87-9793
UFH plasma(n=5)88-10297
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human TNFAIP2 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)90-105%85-95%87-99%
EDTA plasma(n=5)82-97%89-99%84-100%
UFH plasma(n=5)84-92%80-100%82-99%
CV(%):Intra-Assay: CV<8%
Inter-Assay: CV<10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotQ03169
UniProt Protein Function:TNFAIP2: May play a role as a mediator of inflammation and angiogenesis. Belongs to the SEC6 family.
UniProt Protein Details:Chromosomal Location of Human Ortholog: 14q32

Cellular Component: exocyst; extracellular space

Molecular Function:SNARE binding

Biological Process: exocyst localization; exocytosis

NCBI Summary:This gene was identified as a gene whose expression can be induced by the tumor necrosis factor alpha (TNF) in umbilical vein endothelial cells. The expression of this gene was shown to be induced by retinoic acid in a cell line expressing a oncogenic version of the retinoic acid receptor alpha fusion protein, which suggested that this gene may be a retinoic acid target gene in acute promyelocytic leukemia. [provided by RefSeq, Jul 2008]
UniProt Code:Q03169
NCBI GenInfo Identifier:93141326
NCBI Gene ID:7127
NCBI Accession:Q03169.2
UniProt Secondary Accession:Q03169,Q86VI0,
UniProt Related Accession:Q03169
Molecular Weight:72,661 Da
NCBI Full Name:Tumor necrosis factor alpha-induced protein 2
NCBI Synonym Full Names:TNF alpha induced protein 2
NCBI Official Symbol:TNFAIP2  
NCBI Official Synonym Symbols:B94; EXOC3L3  
NCBI Protein Information:tumor necrosis factor alpha-induced protein 2
UniProt Protein Name:Tumor necrosis factor alpha-induced protein 2
UniProt Synonym Protein Names:Primary response gene B94 protein
Protein Family:Tumor necrosis factor alpha-induced protein
UniProt Gene Name:TNFAIP2  
UniProt Entry Name:TNAP2_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3.Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6.Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9.Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample TypeProtocol
SerumIf using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

PlasmaCollect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal FluidCollect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatantCollect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysatesSolubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenatesThe preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysatesRinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast MilkCollect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products