Human SNAP25 / Synaptosomal-associated protein 25 ELISA Kit
- SKU:
- HUFI01449
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P60880
- Sensitivity:
- 0.469ng/ml
- Range:
- 0.781-50ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- SNAP25, Synaptosomal-associated protein 25, SNAP-25, Super protein, SUP, Synaptosomal-associated 25 kDa protein, SNAP, RIC4, SEC9, SNAP, RIC-4, SNAP-25
- Reactivity:
- Human
- Research Area:
- Cell Biology
Description
Human SNAP25/Synaptosomal-associated protein 25 ELISA Kit
The Human SNAP25 (Synaptosomal-Associated Protein 25) ELISA Kit is a powerful tool for the precise measurement of SNAP25 levels in human biological samples such as serum, plasma, and cell culture supernatants. This kit offers exceptional sensitivity and specificity, ensuring accurate and consistent results that are essential for a wide range of research applications.SNAP25 is a critical protein involved in synaptic function and neurotransmitter release, playing a key role in processes such as memory formation, learning, and cognition. Dysregulation of SNAP25 has been linked to various neurological disorders, including Alzheimer's disease, Parkinson's disease, and schizophrenia, making it a valuable biomarker for understanding these conditions and developing potential treatments.
With its advanced technology and reliable performance, the Human SNAP25 ELISA Kit serves as a valuable tool for researchers studying the intricate mechanisms of synaptic transmission and synaptic dysfunction in both health and disease. Order yours today and unlock new insights into the complex world of neurobiology.
| Product Name: | Human SNAP25 / Synaptosomal-associated protein 25 ELISA Kit |
| Product Code: | HUFI01449 |
| Size: | 96 Assays |
| Alias: | SNAP25, Synaptosomal-associated protein 25, SNAP-25, Super protein, SUP, Synaptosomal-associated 25 kDa protein, SNAP, RIC4, SEC9, SNAP, RIC-4, SNAP-25 |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human SNAP25 concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 0.469ng/ml |
| Range: | 0.781-50ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human SNAP25 and the recovery rates were calculated by comparing the measured value to the expected amount of Human SNAP25 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human SNAP25 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | P60880 |
| UniProt Protein Function: | Function: t-SNARE involved in the molecular regulation of neurotransmitter release. May play an important role in the synaptic function of specific neuronal systems. Associates with proteins involved in vesicle docking and membrane fusion. Regulates plasma membrane recycling through its interaction with CENPF. |
| UniProt Protein Details: | Subunit structure: Part of the SNARE core complex containing SNAP25, VAMP2 and STX1A. This complex binds CPLX1. Interacts with CENPF, TRIM9, RIMS1, SNAPIN, OTOF and HGS. Binds STXBP6. Found in a ternary complex with STX1A and VAMP8. Found in a complex containing SYT1, SV2B and syntaxin-1 Subcellular location: Cytoplasm ۼ perinuclear region By similarity. Cell membrane; Lipid-anchor. Cell junction ۼ synapse ۼ synaptosome. Note: Membrane association requires palmitoylation. Expressed throughout cytoplasm, concentrating at the perinuclear region Tissue specificity: Neurons of the neocortex, hippocampus, piriform cortex, anterior thalamic nuclei, pontine nuclei, and granule cells of the cerebellum. Post-translational modification: Palmitoylated. Cys-85 appears to be the main site, and palmitoylation is required for membrane association Miscellaneous: When cloned and expressed in Eschericia coli, where protein palmitoylation does not occur, Cys-85, Cys-88, Cys-90 and Cys-92 in the protein sequence readily form an iron-sulfur cluster instead. Sequence similarities: Belongs to the SNAP-25 family.Contains 2 t-SNARE coiled-coil homology domains. |
| NCBI Summary: | Synaptic vesicle membrane docking and fusion is mediated by SNAREs (soluble N-ethylmaleimide-sensitive factor attachment protein receptors) located on the vesicle membrane (v-SNAREs) and the target membrane (t-SNAREs). The assembled v-SNARE/t-SNARE complex consists of a bundle of four helices, one of which is supplied by v-SNARE and the other three by t-SNARE. For t-SNAREs on the plasma membrane, the protein syntaxin supplies one helix and the protein encoded by this gene contributes the other two. Therefore, this gene product is a presynaptic plasma membrane protein involved in the regulation of neurotransmitter release. Two alternative transcript variants encoding different protein isoforms have been described for this gene. [provided by RefSeq] |
| UniProt Code: | P60880 |
| NCBI GenInfo Identifier: | 46397726 |
| NCBI Gene ID: | 6616 |
| NCBI Accession: | P60880.1 |
| UniProt Secondary Accession: | P60880,P13795, P36974, P70557, P70558, Q53EM2, Q5U0B5 Q8IXK3, Q96FM2, B2RAU4, D3DW16, D3DW17, |
| UniProt Related Accession: | P60880 |
| Molecular Weight: | |
| NCBI Full Name: | Synaptosomal-associated protein 25 |
| NCBI Synonym Full Names: | synaptosomal-associated protein, 25kDa |
| NCBI Official Symbol: | SNAP25 |
| NCBI Official Synonym Symbols: | RIC4; SEC9; SNAP; RIC-4; SNAP-25; FLJ23079; bA416N4.2; dJ1068F16.2 |
| NCBI Protein Information: | synaptosomal-associated protein 25; SUP; super protein; OTTHUMP00000030267; OTTHUMP00000030268; synaptosomal-associated 25 kDa protein; resistance to inhibitors of cholinesterase 4 homolog |
| UniProt Protein Name: | Synaptosomal-associated protein 25 |
| UniProt Synonym Protein Names: | Super protein; SUP; Synaptosomal-associated 25 kDa protein |
| Protein Family: | Synaptosomal-associated protein |
| UniProt Gene Name: | SNAP25 |
| UniProt Entry Name: | SNP25_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human Synaptosomal-associated protein 25 (SNAP25) ELISA Kit (HUEB1711)
Human Synaptosomal Associated Protein 25kDa (SNAP25) ELISA Kit
Mouse SNAP25 / Synaptosomal-associated protein 25 ELISA Kit
Mouse Synaptosomal-associated protein 25 (Snap25) ELISA Kit (MOEB1452)
Rat Synaptosomal-associated protein 25 (Snap25) ELISA Kit (RTEB1068)
Chicken Synaptosomal-associated protein 25 (SNAP25) ELISA Kit (CHEB0346)
Bovine Synaptosomal-associated protein 25 (SNAP25) ELISA Kit (BOEB0765)
Mouse Synaptosomal Associated Protein 25kDa (SNAP25) ELISA Kit
