Human Ryanodine receptor 1 (RYR1) ELISA Kit (HUEB1526)
- SKU:
- HUEB1526
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P21817
- Range:
- 0.156-10 ng/mL
- ELISA Type:
- Sandwich
- Synonyms:
- RYR1, Ryanodine receptor 1, RYR-1, RyR1, Type 1 ryanodine receptor, Skeletal muscle-type ryanodine receptor, Skeletal muscle calcium release channel
- Reactivity:
- Human
Description
Human Ryanodine receptor 1 (RYR1) ELISA Kit
The Human Ryanodine Receptor 1 (RYR1) ELISA Kit is a powerful tool for the accurate and reliable detection of RYR1 levels in human biological samples. This kit is specially designed for use with serum, plasma, and cell culture supernatants, providing researchers with a versatile solution for their studies.Ryanodine Receptor 1 is a critical protein involved in muscle contraction, specifically in skeletal muscle. Mutations in the RYR1 gene have been linked to various muscle disorders, including malignant hyperthermia and central core disease.
The ability to measure RYR1 levels accurately can aid in the diagnosis and understanding of these conditions, as well as in the development of potential treatments.With its high sensitivity and specificity, the Human RYR1 ELISA Kit offers researchers a reliable and reproducible method for quantifying RYR1 levels in human samples. By facilitating the study of RYR1 and its role in muscle function, this kit provides valuable insights into muscle disorders and potential therapeutic strategies.
| Product Name: | Human Ryanodine receptor 1 (RYR1) ELISA Kit |
| SKU: | HUEB1526 |
| Size: | 96T |
| Target: | Human Ryanodine receptor 1 (RYR1) |
| Synonyms: | Skeletal muscle calcium release channel, Skeletal muscle ryanodine receptor, Skeletal muscle-type ryanodine receptor, Type 1 ryanodine receptor, RYR-1, RYDR |
| Assay Type: | Sandwich |
| Detection Method: | ELISA |
| Reactivity: | Human |
| Detection Range: | 0.156-10ng/mL |
| Sensitivity: | 0.067ng/mL |
| Intra CV: | 8.6% | ||||||||||||||||||||
| Inter CV: | 10.3% | ||||||||||||||||||||
| Linearity: |
| ||||||||||||||||||||
| Recovery: |
| ||||||||||||||||||||
| Function: | Calcium channel that mediates the release of Ca(2+) from the sarcoplasmic reticulum into the cytoplasm and thereby plays a key role in triggering muscle contraction following depolarization of T-tubules. Repeated very high-level exercise increases the open probability of the channel and leads to Ca(2+) leaking into the cytoplasm. Can also mediate the release of Ca(2+) from intracellular stores in neurons, and may thereby promote prolonged Ca(2+) signaling in the brain. Required for normal embryonic development of muscle fibers and skeletal muscle. Required for normal heart morphogenesis, skin development and ossification during embryogenesis. |
| Uniprot: | P21817 |
| Sample Type: | Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids |
| Specificity: | Natural and recombinant human Ryanodine receptor 1 |
| Sub Unit: | Homotetramer. Can also form heterotetramers with RYR2. Interacts with CALM; CALM with bound calcium inhibits the RYR1 channel activity. Interacts with S100A1. Interacts with FKBP1A; this stabilizes the closed conformation of the channel. Interacts with CACNA1S; interaction with CACNA1S is important for activation of the RYR1 channel. Interacts with CACNB1. Interacts with TRDN and ASPH; these interactions stimulate RYR1 channel activity (By similarity). Identified in a complex composed of RYR1, PDE4D, PKA, FKBP1A and protein phosphatase 1 (PP1). Repeated very high-level exercise decreases interaction with PDE4D and protein phosphatase 1 (PP1). Interacts with SELENON. |
| Subcellular Location: | Sarcoplasmic reticulum membrane Multi-pass membrane protein Membrane Multi-pass membrane protein Sarcoplasmic reticulum The number of predicted transmembrane domains varies between orthologs, but both N-terminus and C-terminus seem to be cytoplasmic. |
| Storage: | Please see kit components below for exact storage details |
| Note: | For research use only |
| UniProt Protein Function: | RYR1: Calcium channel that controls communication between transverse-tubules and sarcoplasmic reticulum. Contraction of skeletal muscle is triggered by release of calcium ions from SR following depolarization of T-tubules. Can mediate the release of Ca(2+) from intracellular stores in neurons, and may thereby promote prolonged Ca(2+) signaling in the brain. Required for normal development of muscle fibers, skeletal muscle, heart morphogenesis, and skin development and ossification during embryogenesis. Defects in RYR1 are the cause of malignant hyperthermia susceptibility type 1 (MHS1) and central core disease of muscle (CCD). CCD is an autosomal dominant congenital myopathy, but a severe autosomal recessive form also exists. Defects in RYR1 are the cause of multiminicore disease with external ophthalmoplegia (MMDO), congenital myopathy with fiber-type disproportion (CFTD). Defects in RYR1 may be a cause of Samaritan myopathy, a congenital myopathy with benign course. Belongs to the ryanodine receptor (TC 1.A.3.1) family. RYR1 subfamily. 3 isoforms of the human protein are produced by alternative splicing. |
| UniProt Protein Details: | Protein type:Transporter; Transporter, ion channel; Membrane protein, integral; Membrane protein, multi-pass; Channel, calcium Chromosomal Location of Human Ortholog: 19q13.1 Cellular Component: I band; sarcoplasmic reticulum membrane; smooth endoplasmic reticulum; sarcoplasmic reticulum; integral to plasma membrane; cytoplasm; junctional membrane complex; T-tubule; plasma membrane; cell cortex Molecular Function:voltage-gated calcium channel activity; calmodulin binding; protein binding; protease binding; calcium-release channel activity; calcium channel activity; ryanodine-sensitive calcium-release channel activity Biological Process: skin development; cytosolic calcium ion homeostasis; muscle contraction; calcium ion transport; release of sequestered calcium ion into cytosol; response to hypoxia; skeletal muscle fiber development; release of sequestered calcium ion by sarcoplasmic reticulum into cytosol; transmembrane transport; response to caffeine Disease: Minicore Myopathy With External Ophthalmoplegia; Malignant Hyperthermia, Susceptibility To, 1; Central Core Disease Of Muscle; Myopathy, Congenital, With Fiber-type Disproportion |
| NCBI Summary: | This gene encodes a ryanodine receptor found in skeletal muscle. The encoded protein functions as a calcium release channel in the sarcoplasmic reticulum but also serves to connect the sarcoplasmic reticulum and transverse tubule. Mutations in this gene are associated with malignant hyperthermia susceptibility, central core disease, and minicore myopathy with external ophthalmoplegia. Alternatively spliced transcripts encoding different isoforms have been described. [provided by RefSeq, Jul 2008] |
| UniProt Code: | P21817 |
| NCBI GenInfo Identifier: | 108935904 |
| NCBI Gene ID: | 6261 |
| NCBI Accession: | P21817.3 |
| UniProt Related Accession: | P21817 |
| Molecular Weight: | |
| NCBI Full Name: | Ryanodine receptor 1 |
| NCBI Synonym Full Names: | ryanodine receptor 1 |
| NCBI Official Symbol: | RYR1 |
| NCBI Official Synonym Symbols: | CCO; MHS; RYR; MHS1; RYDR; SKRR; RYR-1; PPP1R137 |
| NCBI Protein Information: | ryanodine receptor 1 |
| UniProt Protein Name: | Ryanodine receptor 1 |
| UniProt Synonym Protein Names: | Skeletal muscle calcium release channel; Skeletal muscle ryanodine receptor; Skeletal muscle-type ryanodine receptor; Type 1 ryanodine receptor |
| Protein Family: | Ryanodine receptor |
| UniProt Gene Name: | RYR1 |
| UniProt Entry Name: | RYR1_HUMAN |
| Component | Quantity (96 Assays) | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | -20°C |
| Lyophilized Standard | 2 | -20°C |
| Sample Diluent | 20ml | -20°C |
| Assay Diluent A | 10mL | -20°C |
| Assay Diluent B | 10mL | -20°C |
| Detection Reagent A | 120µL | -20°C |
| Detection Reagent B | 120µL | -20°C |
| Wash Buffer | 30mL | 4°C |
| Substrate | 10mL | 4°C |
| Stop Solution | 10mL | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.
| Step | |
| 1. | Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C. |
| 2. | Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform. |
| 3. | Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper. |
| 4. | Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C. |
| 5. | Repeat the wash process for five times as conducted in step 3. |
| 6. | Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction. |
| 7. | Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing. |
| 8. | Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters. |
| 9. | After experiment, store all reagents according to the specified storage temperature respectively until their expiry. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human Ryanodine receptor 1 / RYR1 ELISA Kit
Human Ryanodine Receptor 1, Skeletal (RYR1) ELISA Kit
Porcine Ryanodine receptor 1 (RYR1) ELISA Kit (PREB0389)
Rat Ryanodine Receptor 1, Skeletal (RYR1) ELISA Kit
Mouse Ryanodine Receptor 1, Skeletal (RYR1) ELISA Kit
Human Ryanodine receptor 2 / RYR2 ELISA Kit
Human Ryanodine Receptor 2, Cardiac (RYR2) ELISA Kit
Human Ryanodine receptor 2 (RYR2) ELISA Kit (HUEB1458)
