Human RGS1 ELISA Kit
- SKU:
- HUFI00920
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- Q08116
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- RGS1, Regulator of G-protein signaling 1, 1R20, BL34, IER1, B-cell activation protein BL34, Early response protein 1R20
- Reactivity:
- Human
Frequently bought together:
Description
Human RGS1 ELISA Kit
The Human RGS1 (Regulator of G-protein Signaling 1) ELISA Kit is a specialized assay designed for the accurate quantification of RGS1 levels in human biological samples such as serum, plasma, and cell culture supernatants. This kit offers high sensitivity and specificity, ensuring reliable and reproducible results for a variety of research applications.RGS1 is a key regulator of G-protein signaling pathways, influencing cellular processes and responses to extracellular signals. Dysregulation of RGS1 has been linked to various diseases, including cancer, autoimmune disorders, and neurological conditions.
Therefore, measuring RGS1 levels can provide valuable insights into disease mechanisms and potential therapeutic targets.With the Human RGS1 ELISA Kit, researchers can easily and effectively measure RGS1 expression levels in human samples, facilitating studies on disease pathogenesis, biomarker discovery, and drug development. Trust in the accuracy and precision of this kit to enhance your research outcomes and advance scientific understanding in various fields.
| Product Name: | Human RGS1 ELISA Kit |
| Product Code: | HUFI00920 |
| Size: | 96 Assays |
| Alias: | RGS1, Regulator of G-protein signaling 1, 1R20, BL34, IER1, B-cell activation protein BL34, Early response protein 1R20 |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human RGS1 concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 0.094ng/ml |
| Range: | 0.156-10ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human RGS1 and the recovery rates were calculated by comparing the measured value to the expected amount of Human RGS1 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human RGS1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | Q08116 |
| UniProt Protein Function: | RGS1: Inhibits signal transduction by increasing the GTPase activity of G protein alpha subunits thereby driving them into their inactive GDP-bound form. This protein may be involved in the regulation of B-cell activation and proliferation. 2 isoforms of the human protein are produced by alternative splicing. |
| UniProt Protein Details: | Chromosomal Location of Human Ortholog: 1q31 Cellular Component: cytosol; extrinsic to internal side of plasma membrane; plasma membrane Molecular Function:calmodulin binding; G-protein alpha-subunit binding; GTPase activator activity Biological Process: G-protein coupled receptor protein signaling pathway; G-protein signaling, adenylate cyclase inhibiting pathway; immune response; positive regulation of GTPase activity; signal transduction |
| NCBI Summary: | This gene encodes a member of the regulator of G-protein signalling family. This protein is located on the cytosolic side of the plasma membrane and contains a conserved, 120 amino acid motif called the RGS domain. The protein attenuates the signalling activity of G-proteins by binding to activated, GTP-bound G alpha subunits and acting as a GTPase activating protein (GAP), increasing the rate of conversion of the GTP to GDP. This hydrolysis allows the G alpha subunits to bind G beta/gamma subunit heterodimers, forming inactive G-protein heterotrimers, thereby terminating the signal. [provided by RefSeq, Jul 2008] |
| UniProt Code: | Q08116 |
| NCBI GenInfo Identifier: | 229470360 |
| NCBI Gene ID: | 5996 |
| NCBI Accession: | Q08116.3 |
| UniProt Secondary Accession: | Q08116,Q07918, Q9H1W2, B2RDM9, B4DZY0, |
| UniProt Related Accession: | Q08116 |
| Molecular Weight: | 19,134 Da |
| NCBI Full Name: | Regulator of G-protein signaling 1 |
| NCBI Synonym Full Names: | regulator of G-protein signaling 1 |
| NCBI Official Symbol: | RGS1Â Â |
| NCBI Official Synonym Symbols: | 1R20; BL34; IER1; IR20; HEL-S-87Â Â |
| NCBI Protein Information: | regulator of G-protein signaling 1 |
| UniProt Protein Name: | Regulator of G-protein signaling 1 |
| UniProt Synonym Protein Names: | B-cell activation protein BL34 |
| Protein Family: | Regulator of G-protein signaling |
| UniProt Gene Name: | RGS1Â Â |
| UniProt Entry Name: | RGS1_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human Regulator of G-protein signaling 1 (RGS1) ELISA Kit (HUEB1014)
€649
Mouse Regulator of G-protein signaling 1 (Rgs1) ELISA Kit (MOEB0780)
€649
Rat Regulator of G-protein signaling 1 (Rgs1) ELISA Kit (RTEB0598)
€649
Human Regulator of G-protein signaling 10 (RGS10) ELISA Kit (HUEB0520)
€649
Human RGS12 (Regulator of G-protein signaling 12) ELISA Kit (HUFI03391)
€599
Human Regulator of G-protein signaling 19 (RGS19) ELISA Kit (HUEB2461)
€649