null

Human Proteinase-activated receptor 4 / PAR4 ELISA Kit

SKU:
HUFI01999
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q96RI0
Sensitivity:
0.469ng/ml
Range:
0.781-50ng/ml
ELISA Type:
Sandwich
Synonyms:
F2RL3, Coagulation factor II receptor-like 3, Thrombin receptor-like 3,
Reactivity:
Human
Research Area:
Cardiovascular
$719
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Human Proteinase-activated receptor 4/PAR4 ELISA Kit

The Human Proteinase-Activated Receptor 4 (PAR4) ELISA Kit is a highly sensitive and specific assay designed for the accurate detection of PAR4 levels in human serum, plasma, and cell culture supernatants. This kit provides reliable and reproducible results, making it suitable for various research applications.Proteinase-activated receptor 4 (PAR4) is a key player in the regulation of platelet activation and function, making it an important target for studying thrombosis and other cardiovascular disorders.

By accurately measuring PAR4 levels, researchers can gain valuable insights into the mechanisms underlying these conditions and potentially identify novel therapeutic targets.Whether investigating cardiovascular diseases, coagulation disorders, or other related conditions, the Human PAR4 ELISA Kit offers a convenient and reliable solution for studying the role of PAR4 in human health and disease. Trust AssayGenie for high-quality ELISA kits that empower your research endeavors.

Product Name:Human Proteinase-activated receptor 4 / PAR4 ELISA Kit
Product Code:HUFI01999
Size:96 Assays
Alias:F2RL3, Coagulation factor II receptor-like 3, Thrombin receptor-like 3
Detection method:Sandwich ELISA, Double Antibody
Application:This immunoassay kit allows for the in vitro quantitative determination of Human F2RL3 concentrations in serum plasma and other biological fluids.
Sensitivity:0.469ng/ml
Range:0.781-50ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Human F2RL3 and the recovery rates were calculated by comparing the measured value to the expected amount of Human F2RL3 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)93-10497
EDTA plasma(n=5)90-10298
UFH plasma(n=5)86-10597
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human F2RL3 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)86-103%90-105%93-105%
EDTA plasma(n=5)90-101%87-98%83-98%
UFH plasma(n=5)80-97%87-93%82-94%
CV(%):Intra-Assay: CV<8%
Inter-Assay: CV<10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotQ96RI0
UniProt Protein Function:PAR4: a G-protein coupled receptor for activated thrombin or trypsin. Coupled to G proteins that stimulate phosphoinositide hydrolysis. Plays a role in platelets activation. Thrombin requires PAR4 for full spreading on a fibrinogen matrix. Widely expressed, with highest levels in lung, pancreas, thyroid, testis and small intestine. Not expressed in brain, kidney, spinal cord and peripheral blood leukocytes. Also detected in platelets. A proteolytic cleavage generates a new N-terminus that functions as a tethered ligand.
UniProt Protein Details:Protein type:Membrane protein, integral; GPCR, family 1; Membrane protein, multi-pass; Receptor, GPCR

Chromosomal Location of Human Ortholog: 19p12

Cellular Component: extracellular region; integral to plasma membrane; plasma membrane

Molecular Function:thrombin receptor activity

Biological Process: blood coagulation; G-protein signaling, coupled to IP3 second messenger (phospholipase C activating); platelet activation; platelet dense granule organization and biogenesis; positive regulation of release of sequestered calcium ion into cytosol; response to wounding; signal transduction

NCBI Summary:Coagulation factor II (thrombin) receptor-like 3 (F2RL3) is a member of the large family of 7-transmembrane-region receptors that couple to guanosine-nucleotide-binding proteins. F2RL3 is also a member of the protease-activated receptor family. F2RL3 is activated by proteolytic cleavage of its extracellular amino terminus. The new amino terminus functions as a tethered ligand and activates the receptor. F2RL3 is activated by thrombin and trypsin. [provided by RefSeq, Jul 2008]
UniProt Code:Q96RI0
NCBI GenInfo Identifier:116242700
NCBI Gene ID:9002
NCBI Accession:Q96RI0.3
UniProt Secondary Accession:Q96RI0,O76067, Q6DK42,
UniProt Related Accession:Q96RI0
Molecular Weight:41,133 Da
NCBI Full Name:Proteinase-activated receptor 4
NCBI Synonym Full Names:F2R like thrombin/trypsin receptor 3
NCBI Official Symbol:F2RL3
NCBI Official Synonym Symbols:PAR4
NCBI Protein Information:proteinase-activated receptor 4
UniProt Protein Name:Proteinase-activated receptor 4
UniProt Synonym Protein Names:Coagulation factor II receptor-like 3; Thrombin receptor-like 3
Protein Family:Proteinase-activated receptor
UniProt Gene Name:F2RL3
UniProt Entry Name:PAR4_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3.Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6.Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9.Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample TypeProtocol
SerumIf using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

PlasmaCollect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal FluidCollect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatantCollect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysatesSolubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenatesThe preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysatesRinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast MilkCollect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products