Human POMT1 ELISA Kit (HUFI01077)- High Sensitivity

Product Name:	Human POMT1 ELISA Kit
Product Code:	HUFI01077
Size:	96 Assays
Alias:	POMT1, Protein O-mannosyl-transferase 1, RT, LGMD2K, MDDGA1, MDDGB1, MDDGC1, Dolichyl-phosphate-mannose--protein mannosyltransferase 1
Detection method:	Sandwich ELISA, Double Antibody
Application:	This immunoassay kit allows for the in vitro quantitative determination of Human POMT1 concentrations in serum plasma and other biological fluids.
Sensitivity:	0.469ng/ml
Range:	0.781-50ng/ml
Storage:	4°C for 6 months
Note:	For Research Use Only

Recovery:

Matrices listed below were spiked with certain level of Human POMT1 and the recovery rates were calculated by comparing the measured value to the expected amount of Human POMT1 in samples.

Matrix	Recovery range(%)	Average(%)
serum(n=5)	86-105	95
EDTA plasma(n=5)	87-100	97
UFH plasma(n=5)	85-101	90

Linearity:

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human POMT1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample	1:2	1:4	1:8
serum(n=5)	87-100%	96-105%	88-101%
EDTA plasma(n=5)	83-100%	82-101%	87-100%
UFH plasma(n=5)	89-98%	80-100%	80-100%

CV(%):

Intra-Assay: CV<8%
Inter-Assay: CV<10%

Component	Quantity	Storage
ELISA Microplate (Dismountable)	8×12 strips	4°C for 6 months
Lyophilized Standard	2	4°C/-20°C
Sample/Standard Dilution Buffer	20ml	4°C
Biotin-labeled Antibody(Concentrated)	120ul	4°C (Protect from light)
Antibody Dilution Buffer	10ml	4°C
HRP-Streptavidin Conjugate(SABC)	120ul	4°C (Protect from light)
SABC Dilution Buffer	10ml	4°C
TMB Substrate	10ml	4°C (Protect from light)
Stop Solution	10ml	4°C
Wash Buffer(25X)	30ml	4°C
Plate Sealer	5	-

Other materials and equipment required:

Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir

Uniprot

Q9Y6A1

UniProt Protein Function:	POMT1: Transfers mannosyl residues to the hydroxyl group of serine or threonine residues. Coexpression of both POMT1 and POMT2 is necessary for enzyme activity, expression of either POMT1 or POMT2 alone is insufficient. Defects in POMT1 are the cause of muscular dystrophy- dystroglycanopathy congenital with mental retardation type B1 (MDDGB1); also called muscular dystrophy congenital POMT1-related. MDDGB1 is an autosomal recessive disorder characterized by congenital muscular dystrophy associated with mental retardation and mild structural brain abnormalities. Defects in POMT1 are the cause of muscular dystrophy- dystroglycanopathy congenital with brain and eye anomalies type A1 (MDDGA1); also known as hydrocephalus-agyria-retinal dysplasia or HARD syndrome. MDDGA1 is an autosomal recessive disorder characterized by cobblestone lissencephaly, hydrocephalus, agyria, retinal displasia, with or without encephalocele. It is often associated with congenital muscular dystrophy and usually lethal within the first few months of life. Included diseases are the more severe Walker-Warburg syndrome and the slightly less severe muscle-eye-brain disease. Defects in POMT1 are the cause of muscular dystrophy- dystroglycanopathy limb-girdle type C1 (MDDGC1); also called autosomal recessive limb-girdle muscular dystrophy with mental retardation. MDDGC1 is a novel form of recessive limb girdle muscular dystrophy with mild mental retardation without any obvious structural brain abnormality, associated with an abnormal alpha-dystroglycan pattern in the muscle. MDDGC1 is a significantly milder allelic form of WWS. Belongs to the glycosyltransferase 39 family. 4 isoforms of the human protein are produced by alternative splicing.
UniProt Protein Details:	Protein type:EC 2.4.1.109; Glycan Metabolism - O-mannosyl glycan biosynthesis; Membrane protein, multi-pass; Membrane protein, integral; Transferase Chromosomal Location of Human Ortholog: 9q34.1 Cellular Component: endoplasmic reticulum; endoplasmic reticulum membrane Molecular Function:dolichyl-phosphate-mannose-protein mannosyltransferase activity; mannosyltransferase activity Biological Process: carbohydrate metabolic process; cell wall mannoprotein biosynthetic process; multicellular organismal development; protein amino acid O-linked glycosylation Disease: Muscular Dystrophy-dystroglycanopathy (congenital With Brain And Eye Anomalies), Type A, 1; Muscular Dystrophy-dystroglycanopathy (congenital With Mental Retardation), Type B, 1; Muscular Dystrophy-dystroglycanopathy (limb-girdle), Type C, 1
NCBI Summary:	The protein encoded by this gene is an O-mannosyltransferase that requires interaction with the product of the POMT2 gene for enzymatic function. The encoded protein is found in the membrane of the endoplasmic reticulum. Defects in this gene are a cause of Walker-Warburg syndrome (WWS) and limb-girdle muscular dystrophy type 2K (LGMD2K). Several transcript variants encoding different isoforms have been found for this gene.[provided by RefSeq, Oct 2008]
UniProt Code:	Q9Y6A1
NCBI GenInfo Identifier:	332278226
NCBI Gene ID:	10585
NCBI Accession:	Q9Y6A1.3
UniProt Secondary Accession:	Q9Y6A1,Q5JT01, Q5JT06, Q5JT08, Q8NC91, Q8TCA9, Q9NX32 Q9NX82, Q9UNT2, B3KQG0, B4DIF0,
UniProt Related Accession:	Q9Y6A1
Molecular Weight:	69,531 Da
NCBI Full Name:	Protein O-mannosyl-transferase 1
NCBI Synonym Full Names:	protein O-mannosyltransferase 1
NCBI Official Symbol:	POMT1
NCBI Official Synonym Symbols:	RT; LGMD2K; MDDGA1; MDDGB1; MDDGC1
NCBI Protein Information:	protein O-mannosyl-transferase 1
UniProt Protein Name:	Protein O-mannosyl-transferase 1
UniProt Synonym Protein Names:	Dolichyl-phosphate-mannose--protein mannosyltransferase 1
Protein Family:	Protein O-mannosyl-transferase
UniProt Gene Name:	POMT1
UniProt Entry Name:	POMT1_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

Step	Protocol
1.	Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.	Aliquot 0.1ml standard solutions into the standard wells.
3.	Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.	Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.	Seal the plate with a cover and incubate at 37 °C for 90 min.
6.	Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.	Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.	Seal the plate with a cover and incubate at 37°C for 60 min.
9.	Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.	Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.	Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.	Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.	Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14.	Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma	Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Elotuzumab Biosimilar HDBS0002: A New Frontier in Multiple Myeloma Treatment

Daratumumab Biosimilar HDBS0004: Advancing CD38-Targeted Therapy

Cobolimab Biosimilar HDBS0008: Expanding Access to TIM-3 Immune Checkpoint Inhibition

Human POMT1 ELISA Kit

Description