null

Human Peroxidasin homolog / PXDN ELISA Kit

SKU:
HUFI00846
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q92626
Sensitivity:
46.875pg/ml
Range:
78.125-5000pg/ml
ELISA Type:
Sandwich
Synonyms:
PXDN, Peroxidasin homolog, p53-responsive gene 2 protein, Melanoma-associated antigen MG50, Vascular peroxidase 1, MG50, VPO, VPO1
Reactivity:
Human
Research Area:
Signal Transduction
$719
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Human Peroxidasin homolog/PXDN ELISA Kit

The Human Peroxidasin Homolog (PXDN) ELISA Kit is specifically designed for the accurate detection of PXDN levels in human serum, plasma, and cell culture supernatants. This advanced kit offers high sensitivity and specificity, ensuring reliable and reproducible results for a variety of research applications.Peroxidasin homolog (PXDN) is a key protein involved in extracellular matrix formation and tissue development. It plays a critical role in processes such as wound healing, tissue regeneration, and cell migration. Studies have shown that dysregulation of PXDN expression can contribute to diseases such as fibrosis, cancer, and cardiovascular disorders, making it a valuable biomarker for investigating these conditions and exploring potential therapies.

With its superior performance and ease-of-use, the Human PXDN ELISA Kit is an essential tool for researchers studying the role of PXDN in human health and disease. Trust in this kit to deliver accurate and precise measurements, allowing for meaningful insights into PXDN biology and its impact on various pathological processes.

Product Name:Human Peroxidasin homolog / PXDN ELISA Kit
Product Code:HUFI00846
Size:96 Assays
Alias:PXDN, Peroxidasin homolog, p53-responsive gene 2 protein, Melanoma-associated antigen MG50, Vascular peroxidase 1, MG50, VPO, VPO1
Detection method:Sandwich ELISA, Double Antibody
Application:This immunoassay kit allows for the in vitro quantitative determination of Human PXDN concentrations in serum plasma and other biological fluids.
Sensitivity:46.875pg/ml
Range:78.125-5000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Human PXDN and the recovery rates were calculated by comparing the measured value to the expected amount of Human PXDN in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)85-10090
EDTA plasma(n=5)85-10294
UFH plasma(n=5)88-10495
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human PXDN and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)85-90%85-105%88-103%
EDTA plasma(n=5)86-101%83-98%89-100%
UFH plasma(n=5)84-95%86-99%82-89%
CV(%):Intra-Assay: CV<8%
Inter-Assay: CV<10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotQ92626
UniProt Protein Function:PXDN: Displays low peroxidase activity and is likely to participate in H(2)O(2) metabolism and peroxidative reactions in the cardiovascular system. Plays a role in extracellular matrix formation. Belongs to the peroxidase family. XPO subfamily. 2 isoforms of the human protein are produced by alternative splicing.
UniProt Protein Details:Protein type:EC 1.11.1.7; Oxidoreductase; Secreted; Secreted, signal peptide

Chromosomal Location of Human Ortholog: 2p25.3

Cellular Component: endoplasmic reticulum; extracellular matrix; extracellular region; extracellular space; proteinaceous extracellular matrix

Molecular Function:extracellular matrix structural constituent; heme binding; interleukin-1 receptor antagonist activity; metal ion binding; peroxidase activity

Biological Process: extracellular matrix organization; hydrogen peroxide catabolic process; immune response; negative regulation of cytokine and chemokine mediated signaling pathway; response to oxidative stress

Disease: Corneal Opacification With Other Ocular Anomalies

NCBI Summary:This gene encodes a heme-containing peroxidase that is secreted into the extracellular matrix. It is involved in extracellular matrix formation, and may function in the physiological and pathological fibrogenic response in fibrotic kidney. Mutations in this gene cause corneal opacification and other ocular anomalies, and also microphthalmia and anterior segment dysgenesis. [provided by RefSeq, Aug 2014]
UniProt Code:Q92626
NCBI GenInfo Identifier:109150416
NCBI Gene ID:7837
NCBI Accession:NP_036425.1
UniProt Secondary Accession:Q92626,Q4KMG2, A8QM65, D6W4Y0,
UniProt Related Accession:Q92626
Molecular Weight:
NCBI Full Name:peroxidasin homolog
NCBI Synonym Full Names:peroxidasin
NCBI Official Symbol:PXDN
NCBI Official Synonym Symbols:PXN; VPO; MG50; PRG2; ASGD7; COPOA; D2S448; D2S448E
NCBI Protein Information:peroxidasin homolog
UniProt Protein Name:Peroxidasin homolog
UniProt Synonym Protein Names:Melanoma-associated antigen MG50; Vascular peroxidase 1; p53-responsive gene 2 protein
UniProt Gene Name:PXDN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3.Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6.Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9.Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample TypeProtocol
SerumIf using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

PlasmaCollect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal FluidCollect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatantCollect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysatesSolubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenatesThe preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysatesRinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast MilkCollect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products