Human Paxillin ELISA Kit
- SKU:
- HUFI02700
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P49023
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- Pax
- Reactivity:
- Human
Description
Human Paxillin ELISA Kit
The Human Paxillin ELISA Kit is a valuable tool for researchers looking to quantify levels of paxillin in human samples such as serum, plasma, and cell culture supernatants. Paxillin is a key adapter protein involved in cell adhesion and migration, playing a critical role in various cellular processes.This kit offers unparalleled sensitivity and specificity, ensuring accurate and reliable results for a range of research applications. By measuring paxillin levels, researchers can gain insights into cell signaling pathways, cytoskeletal dynamics, and the progression of diseases such as cancer, cardiovascular disorders, and neurodegenerative conditions.
With its user-friendly protocols and high-quality components, the Human Paxillin ELISA Kit is an essential tool for studying paxillin biology and its implications in various physiological and pathological processes. Unlock the potential of your research with this innovative kit from Assay Genie.
| Product Name: | Human Paxillin ELISA Kit |
| Product Code: | HUFI02700 |
| Size: | 96 Assays |
| Alias: | Pax |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human Pax concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 0.094ng/ml |
| Range: | 0.156-10ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human Pax and the recovery rates were calculated by comparing the measured value to the expected amount of Human Pax in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human Pax and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | P49023 |
| UniProt Protein Function: | PXN: a multi-domain cytoskeletal protein involved in actin-membrane attachment that localizes primarily to focal adhesion sites to the extracellular matrix. Phosphorylated by focal adhesion kinase (FAK) and is a component of integrin signaling. Its phosphorylation provides docking sites for recruitment of signaling molecules to focal adhesions. Binds in vitro to vinculin as well as to the SH3 domain of c-SRC and, when tyrosine phosphorylated, to the Crk SH2 domain. Interacts with GIT1, NUDT16L1/SDOS, PARVA and TGFB1I1. Component of cytoplasmic complexes, which also contain GIT1, ARHGEF6 and PAK1. Binds DDEF2. Interacts with unphosphorylated ITGA4. Interacts with RNF5.Three alternatively-spliced isoforms have been described. Isoform beta binds to focal adhesion kinase but weakly to vinculin. Isoform gamma binds to vinculin but only weakly to focal adhesion kinase. |
| UniProt Protein Details: | Protein type:Adaptor/scaffold; Cytoskeletal; Motility/polarity/chemotaxis; Cell adhesion Chromosomal Location of Human Ortholog: 12q24.31 Cellular Component: nucleoplasm; microtubule associated complex; focal adhesion; lamellipodium; cytoplasm; stress fiber; plasma membrane; cell cortex; cytosol Molecular Function:integrin binding; protein binding; zinc ion binding; beta-catenin binding; BH4 domain binding; protein kinase binding; vinculin binding Biological Process: integrin-mediated signaling pathway; lamellipodium biogenesis; epidermal growth factor receptor signaling pathway; focal adhesion formation; regulation of cell shape; peptidyl-tyrosine phosphorylation; branching morphogenesis of a tube; muscle contraction; activation of MAPK activity; transforming growth factor beta receptor signaling pathway; signal complex assembly; cytoskeleton organization and biogenesis; vascular endothelial growth factor receptor signaling pathway; signal transduction; cell adhesion |
| NCBI Summary: | This gene encodes a cytoskeletal protein involved in actin-membrane attachment at sites of cell adhesion to the extracellular matrix (focal adhesion). Alternatively spliced transcript variants encoding different isoforms have been described for this gene. These isoforms exhibit different expression pattern, and have different biochemical, as well as physiological properties (PMID:9054445). [provided by RefSeq, Aug 2011] |
| UniProt Code: | P49023 |
| NCBI GenInfo Identifier: | 317373486 |
| NCBI Gene ID: | 5829 |
| NCBI Accession: | P49023.3 |
| UniProt Secondary Accession: | P49023,O14970, O14971, O60360, Q5HYA4, B2RAI3, B7ZMB4 |
| UniProt Related Accession: | P49023 |
| Molecular Weight: | 68kDa |
| NCBI Full Name: | Paxillin |
| NCBI Synonym Full Names: | paxillin |
| NCBI Official Symbol: | PXNÂ Â |
| NCBI Protein Information: | paxillin |
| UniProt Protein Name: | Paxillin |
| Protein Family: | Paxillin |
| UniProt Gene Name: | PXNÂ Â |
| UniProt Entry Name: | PAXI_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human Paxillin (Pax) ELISA Kit
Human Paxillin (PXN) ELISA Kit (HUEB1983)
Paxillin Colorimetric Cell-Based ELISA Kit
Human Pax (Paxillin) CLIA Kit (HUES01216)
Paxillin (Phospho-Tyr31) Colorimetric Cell-Based ELISA Kit
