null

Human PAWR(PRKC apoptosis WT1 regulator protein) ELISA Kit

SKU:
HUFI03290
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q96IZ0
Sensitivity:
0.094ng/ml
Range:
0.156-10ng/ml
ELISA Type:
Sandwich
Synonyms:
Par 4, PAR4, PAWR, Prostate apoptosis response 4 protein
Reactivity:
Human
$719
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Human PAWR (PRKC apoptosis WT1 regulator protein) ELISA Kit

The Human PAWR (PRKC, apoptosis, WT1, regulator) ELISA Kit is a reliable and sensitive assay designed for the accurate detection of PAWR protein levels in human samples including serum, plasma, and cell culture supernatants. This ELISA kit offers high specificity and reproducibility, providing researchers with trustworthy results for a variety of research applications.PAWR, also known as PRKC apoptosis WT1 regulator protein, is a key regulator involved in apoptosis and the modulation of protein kinase C (PRKC) signaling pathways. Dysregulation of PAWR has been implicated in various diseases such as cancer, neurodegenerative disorders, and cardiovascular diseases, underscoring its importance as a potential biomarker for disease progression and therapeutic research.

By utilizing the Human PAWR ELISA Kit, researchers can accurately quantify PAWR levels in biological samples, allowing for a deeper understanding of its role in disease pathogenesis and the development of targeted interventions. Trust this ELISA kit to provide dependable results for your research needs in studying PAWR-related mechanisms and diseases.

Product Name:Human PAWR(PRKC apoptosis WT1 regulator protein) ELISA Kit
Product Code:HUFI03290
Size:96 Assays
Alias:Par 4, PAR4, PAWR, Prostate apoptosis response 4 protein
Detection method:Sandwich ELISA, Double Antibody
Application:This immunoassay kit allows for the in vitro quantitative determination of Human PAWR concentrations in serum plasma and other biological fluids.
Sensitivity:0.094ng/ml
Range:0.156-10ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Human PAWR and the recovery rates were calculated by comparing the measured value to the expected amount of Human PAWR in samples. Enquire for more information.
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human PAWR and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. Enquire for more information.
CV(%):Intra-Assay: CV<8%
Inter-Assay: CV<10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotQ96IZ0
UniProt Protein Function:PAR-4: a proapoptotic protein that drives trafficking and activation of Fas and Fasl to induce prostate cancer cell apoptosis and tumor regression. Capable of selectively inducing apoptosis in cancer cells, sensitizing the cells to diverse apoptotic stimuli and causing regression of tumors in animal models. Induces apoptosis in certain cancer cells by activation of the Fas prodeath pathway and coparallel inhibition of NF-kappaB transcriptional activity. Inhibits the transcriptional activation and augments the transcriptional repression mediated by WT1. Down-regulates the anti-apoptotic protein BCL2 via its interaction with WT1. Seems also to be a transcriptional repressor by itself. May be directly involved in regulating the amyloid precursor protein (APP) cleavage activity of BACE1.
UniProt Protein Details:Protein type:Apoptosis

Chromosomal Location of Human Ortholog: 12q21

Cellular Component: cytoplasm; plasma membrane; actin filament; nucleus; actin cytoskeleton

Molecular Function:protein binding; leucine zipper domain binding; enzyme binding; actin binding; transcription corepressor activity

Biological Process: negative regulation of cell proliferation; actin filament bundle formation; negative regulation of T cell proliferation; interleukin-2 biosynthetic process; transcription, DNA-dependent; apoptosis; positive regulation of apoptosis; negative regulation of T cell receptor signaling pathway; negative regulation of B cell proliferation; negative regulation of transcription from RNA polymerase II promoter; positive regulation of amyloid precursor protein biosynthetic process

NCBI Summary:The tumor suppressor WT1 represses and activates transcription. The protein encoded by this gene is a WT1-interacting protein that itself functions as a transcriptional repressor. It contains a putative leucine zipper domain which interacts with the zinc finger DNA binding domain of WT1. This protein is specifically upregulated during apoptosis of prostate cells. [provided by RefSeq, Jul 2008]
UniProt Code:Q96IZ0
NCBI GenInfo Identifier:66773935
NCBI Gene ID:5074
NCBI Accession:Q96IZ0.1
UniProt Secondary Accession:Q96IZ0,O75796, Q6FHY9, Q8N700,
UniProt Related Accession:Q96IZ0
Molecular Weight:340
NCBI Full Name:PRKC apoptosis WT1 regulator protein
NCBI Synonym Full Names:PRKC, apoptosis, WT1, regulator
NCBI Official Symbol:PAWR  
NCBI Official Synonym Symbols:PAR4; Par-4  
NCBI Protein Information:PRKC apoptosis WT1 regulator protein; WT1-interacting protein; prostate apoptosis response-4; transcriptional repressor PAR4; prostate apoptosis response 4 protein; prostate apoptosis response protein 4; prostate apoptosis response protein PAR-4
UniProt Protein Name:PRKC apoptosis WT1 regulator protein
UniProt Synonym Protein Names:Prostate apoptosis response 4 protein; Par-4
Protein Family:PRKC apoptosis WT1 regulator protein
UniProt Gene Name:PAWR  
UniProt Entry Name:PAWR_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3.Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6.Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9.Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample TypeProtocol
SerumIf using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

PlasmaCollect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal FluidCollect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatantCollect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysatesSolubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenatesThe preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysatesRinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast MilkCollect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products