Human OLIG2 (Oligodendrocyte transcription factor 2) ELISA Kit (HUFI07413)
- SKU:
- HUFI07413
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- Q13516
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- BHLHB1, bHLHe19, OLIG2, OLIGO2, PRKCBP2, RACK17
- Reactivity:
- Human
Frequently bought together:
Description
Human OLIG2 (Oligodendrocyte transcription factor 2) ELISA Kit (HUFI07413)
The Human Olig2 (Oligodendrocyte Transcription Factor 2) ELISA Kit is designed for the accurate detection of Olig2 levels in human serum, plasma, and cell culture supernatants. This kit features high sensitivity and specificity, ensuring reliable and reproducible results, making it ideal for a wide range of research applications.Olig2 is a key transcription factor involved in the development and differentiation of oligodendrocytes, crucial for myelination in the central nervous system.
Dysregulation of Olig2 has been implicated in various neurological disorders, including multiple sclerosis, brain tumors, and spinal cord injuries, highlighting its importance as a biomarker for studying these conditions and potential therapeutic targets.Overall, the Human Olig2 ELISA Kit provides researchers with a valuable tool for investigating the role of Olig2 in health and disease, offering the precision and accuracy needed for meaningful results in their studies.
| Product Name: | Human OLIG2 (Oligodendrocyte transcription factor 2) ELISA Kit |
| Product Code: | HUFI07413 |
| Size: | 96 Assays |
| Alias: | BHLHB1 ELISA Kit, bHLHe19 ELISA Kit, OLIG2 ELISA Kit, OLIGO2 ELISA Kit, PRKCBP2 ELISA Kit, RACK17 ELISA Kit |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human OLIG2 (Oligodendrocyte transcription factor 2) concentrations in serum plasma and other biological fluids. |
| Sensitivity: | < 0.094ng/ml |
| Range: | 0.156-10ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human OLIG2 (Oligodendrocyte transcription factor 2) and the recovery rates were calculated by comparing the measured value to the expected amount of Human OLIG2 (Oligodendrocyte transcription factor 2) in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human OLIG2 (Oligodendrocyte transcription factor 2) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| UniProt Protein Function: | OLIG2: Required for oligodendrocyte and motor neuron specification in the spinal cord, as well as for the development of somatic motor neurons in the hindbrain. Cooperates with OLIG1 to establish the pMN domain of the embryonic neural tube. Antagonist of V2 interneuron and of NKX2-2-induced V3 interneuron development. A chromosomal aberration involving OLIG2 may be a cause of a form of T-cell acute lymphoblastic leukemia (T-ALL). Translocation t(14;21)(q11.2;q22) with TCRA. |
| UniProt Protein Details: | Protein type:Transcription factor; Oncoprotein Chromosomal Location of Human Ortholog: 21q22.11 |
| NCBI Summary: | This gene encodes a basic helix-loop-helix transcription factor which is expressed in oligodendroglial tumors of the brain. The protein is an essential regulator of ventral neuroectodermal progenitor cell fate. The gene is involved in a chromosomal translocation t(14;21)(q11.2;q22) associated with T-cell acute lymphoblastic leukemia. Its chromosomal location is within a region of chromosome 21 which has been suggested to play a role in learning deficits associated with Down syndrome. [provided by RefSeq, Jul 2008] |
| UniProt Code: | Q13516 |
| NCBI GenInfo Identifier: | 22261817 |
| NCBI Gene ID: | 10215 |
| NCBI Accession: | Q13516.2 |
| UniProt Secondary Accession: | Q13516,Q05BP9, Q49AL3, Q86X04, Q9NZ14, B3KRF3, |
| UniProt Related Accession: | Q13516 |
| Molecular Weight: | 32,385 Da |
| NCBI Full Name: | Oligodendrocyte transcription factor 2 |
| NCBI Synonym Full Names: | oligodendrocyte lineage transcription factor 2 |
| NCBI Official Symbol: | OLIG2 |
| NCBI Official Synonym Symbols: | BHLHB1; OLIGO2; RACK17; PRKCBP2; bHLHe19 |
| NCBI Protein Information: | oligodendrocyte transcription factor 2 |
| UniProt Protein Name: | Oligodendrocyte transcription factor 2 |
| UniProt Synonym Protein Names: | Class B basic helix-loop-helix protein 1; bHLHb1; Class E basic helix-loop-helix protein 19; bHLHe19; Protein kinase C-binding protein 2; Protein kinase C-binding protein RACK17 |
| Protein Family: | Oligodendrocyte transcription factor |
| UniProt Gene Name: | OLIG2 |
| UniProt Entry Name: | OLIG2_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37 °C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37 °C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37 °C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37 °C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human ATF1 / Activating Transcription Factor 2 ELISA Kit
€599
Human ATF2 / Activating Transcription Factor 2 ELISA Kit
€599
Human Transcription termination factor 2 (TTF2) ELISA Kit (HUEB2466)
€649
Human YY1 Transcription Factor (YY1) ELISA Kit
€649
Human Transcription factor SOX-2 (SOX2) ELISA Kit (HUEB0657)
€649
Human E2F1(Transcription factor E2F1) ELISA Kit
€599
Human Transcription Factor A, Mitochondrial (TFAM) ELISA Kit
€649
Human Twist Transcription Factor (TWIST) ELISA Kit
€649