Human NFATC1 / Nuclear factor of activated T-cells, cytoplasmic 1 ELISA Kit (HUFI01483)
- SKU:
- HUFI01483
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- O95644
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- NFATC1, NFAT2, NFAT transcription complex cytosolic component, NFATC, NF-ATC, NF-ATc1, nuclear factor of activated T-cells, cytoplasmic, calcineurin-dependent 1, Nuclear Factor of Activated T Cells C1
- Reactivity:
- Human
- Research Area:
- Epigenetics and Nuclear Signaling
Frequently bought together:
Description
Human NFATC1/Nuclear factor of activated T-cells, cytoplasmic 1 ELISA Kit
The Human NFATC1 (Nuclear Factor of Activated T-Cells Cytoplasmic 1) ELISA Kit is specifically designed for the precise measurement of NFATC1 levels in human serum, plasma, and cell culture supernatants. With its high sensitivity and specificity, this kit provides accurate and reproducible results, making it suitable for a variety of research applications.NFATC1 is a transcription factor that plays a critical role in immune response regulation, cell differentiation, and proliferation. Dysregulation of NFATC1 has been linked to various diseases, including autoimmune disorders and cancer.
Therefore, measuring NFATC1 levels can provide valuable insights into the pathogenesis of these conditions and may lead to the development of novel therapeutic strategies.Overall, the Human NFATC1 ELISA Kit is a valuable tool for researchers studying immune system function, cell signaling pathways, and disease mechanisms associated with NFATC1 dysregulation. Its reliability and accuracy make it an indispensable asset for advancing research in the field.
| Product Name: | Human NFATC1 / Nuclear factor of activated T-cells, cytoplasmic 1 ELISA Kit |
| Product Code: | HUFI01483 |
| Size: | 96 Assays |
| Alias: | NFATC1, NFAT2, NFAT transcription complex cytosolic component, NFATC, NF-ATC, NF-ATc1, nuclear factor of activated T-cells, cytoplasmic, calcineurin-dependent 1, Nuclear Factor of Activated T Cells C1 |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human NFATC1 concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 0.094ng/ml |
| Range: | 0.156-10ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human NFATC1 and the recovery rates were calculated by comparing the measured value to the expected amount of Human NFATC1 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human NFATC1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | O95644 |
| UniProt Protein Function: | NFAT2: a transcription factor that plays a role in the inducible expression of cytokine genes in T cells, especially in the induction of the IL-2 and IL-4. Also control gene expression in embryonic cardiac cells. Could regulate not only the activation and proliferation but also the differentiation and programmed death of lymphoid and nonlymphoid cells. Six splice variant isoforms have been identified. Expressed in thymus, peripheral leukocytes as T-cells and spleen. Isoforms A are preferentially expressed in effector T-cells (thymus and peripheral leukocytes) whereas isoforms B and isoforms C are preferentially expressed in naive T-cells (spleen). Isoforms B are expressed in naive T-cells after first antigen exposure and isoforms A are expressed in effector T-cells after second antigen exposure. |
| UniProt Protein Details: | Protein type:DNA-binding; Transcription factor Chromosomal Location of Human Ortholog: 18q23 Cellular Component: nucleoplasm; transcription factor complex; nuclear chromatin; cytoplasm; cytosol; nucleus Molecular Function:RNA polymerase II transcription factor activity, enhancer binding; protein binding; mitogen-activated protein kinase p38 binding; FK506 binding; transcription factor activity Biological Process: transcription from RNA polymerase II promoter; positive regulation of transcription, DNA-dependent; calcium ion transport; heart development; innate immune response; epithelial to mesenchymal transition; positive regulation of transcription from RNA polymerase II promoter; osteoclast differentiation; G1/S transition of mitotic cell cycle |
| NCBI Summary: | The product of this gene is a component of the nuclear factor of activated T cells DNA-binding transcription complex. This complex consists of at least two components: a preexisting cytosolic component that translocates to the nucleus upon T cell receptor (TCR) stimulation, and an inducible nuclear component. Proteins belonging to this family of transcription factors play a central role in inducible gene transcription during immune response. The product of this gene is an inducible nuclear component. It functions as a major molecular target for the immunosuppressive drugs such as cyclosporin A. Multiple alternatively spliced transcript variants encoding distinct isoforms have been identified for this gene. Different isoforms of this protein may regulate inducible expression of different cytokine genes. [provided by RefSeq, Jul 2013] |
| UniProt Code: | O95644 |
| NCBI GenInfo Identifier: | 8928220 |
| NCBI Gene ID: | 4772 |
| NCBI Accession: | O95644.3 |
| UniProt Secondary Accession: | O95644,Q12865, Q15793, Q2M1S3, B5B2M4, B5B2M5, B5B2M6 B5B2M7, B5B2M8, B5B2M9, B5B2N1, |
| UniProt Related Accession: | O95644 |
| Molecular Weight: | |
| NCBI Full Name: | Nuclear factor of activated T-cells, cytoplasmic 1 |
| NCBI Synonym Full Names: | nuclear factor of activated T-cells, cytoplasmic, calcineurin-dependent 1 |
| NCBI Official Symbol: | NFATC1 |
| NCBI Official Synonym Symbols: | NFAT2; NFATc; NF-ATC |
| NCBI Protein Information: | nuclear factor of activated T-cells, cytoplasmic 1; NFAT transcription complex cytosolic component |
| UniProt Protein Name: | Nuclear factor of activated T-cells, cytoplasmic 1 |
| UniProt Synonym Protein Names: | NFAT transcription complex cytosolic component; NF-ATc; NFATc |
| UniProt Gene Name: | NFATC1 |
| UniProt Entry Name: | NFAC1_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human Nuclear factor of activated T-cells, cytoplasmic 1 (NFATC1) ELISA Kit (HUEB1745)
$779
Rat NFATC1(Nuclear factor of activated T-cells, cytoplasmic 1) ELISA Kit
$719
Porcine Nuclear factor of activated T-cells, cytoplasmic 1 (NFATC1) ELISA Kit (PREB0430)
$839
Bovine Nuclear factor of activated T-cells, cytoplasmic 1 (NFATC1) ELISA Kit (BOEB0776)
$839
Mouse Nuclear factor of activated T-cells, cytoplasmic 1 (Nfatc1) ELISA Kit (MOEB1487)
$779