null

Human Nesfatin-1 / Nucleobindin-2 ELISA Kit

SKU:
HUFI02041
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P80303
Sensitivity:
0.188ng/ml
Range:
0.313-20ng/ml
ELISA Type:
Competitive
Synonyms:
NEFA
Reactivity:
Human
Research Area:
Signal Transduction
€599
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Human Nesfatin-1/Nucleobindin-2 ELISA Kit

The Human Nesfatin-1 Nucleobindin-2 ELISA Kit is a powerful tool for the accurate measurement of Nesfatin-1 levels in human biological samples. With its high sensitivity and specificity, this kit provides reliable and reproducible results, making it suitable for a variety of research applications.Nesfatin-1, also known as nucleobindin-2, is a peptide hormone that is involved in the regulation of food intake, energy balance, and metabolism. It has been implicated in conditions such as obesity, diabetes, and metabolic syndrome, making it a valuable biomarker for studying these diseases and potential therapeutic interventions.

This ELISA kit allows for easy and efficient quantification of Nesfatin-1 levels in serum, plasma, and cell culture samples, enabling researchers to gain valuable insights into the role of this hormone in various physiological and pathological processes. Upgrade your research capabilities with the Human Nesfatin-1 Nucleobindin-2 ELISA Kit from AssayGenie.

Product Name:Human Nesfatin-1 / Nucleobindin-2 ELISA Kit
Product Code:HUFI02041
Size:96 Assays
Alias:NEFA
Detection method:Competitive ELISA, Coated with Antibody
Application:This immunoassay kit allows for the in vitro quantitative determination of Human NEFA concentrations in serum plasma and other biological fluids.
Sensitivity:0.188ng/ml
Range:0.313-20ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Human NEFA and the recovery rates were calculated by comparing the measured value to the expected amount of Human NEFA in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)90-10497
EDTA plasma(n=5)87-10598
UFH plasma(n=5)86-10499
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human NEFA and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)92-103%87-105%85-105%
EDTA plasma(n=5)85-99%89-101%83-101%
UFH plasma(n=5)81-100%81-94%81-99%
CV(%):Intra-Assay: CV<8%
Inter-Assay: CV<10%
ComponentQuantityStorage
ELISA Microplate(Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)60ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipettetips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotP80303
UniProt Protein Function:NUCB2: Calcium-binding protein. May have a role in calcium homeostasis. Belongs to the nucleobindin family. 2 isoforms of the human protein are produced by alternative splicing.
UniProt Protein Details:Protein type:Vesicle; Secreted, signal peptide; Secreted

Chromosomal Location of Human Ortholog: 11p15.1

Cellular Component: Golgi apparatus; extracellular space; endoplasmic reticulum; ER-Golgi intermediate compartment; plasma membrane; nuclear envelope; cytosol

Molecular Function:protein binding; DNA binding; calcium ion binding

NCBI Summary:This gene encodes a protein with a suggested role in calcium level maintenance, eating regulation in the hypothalamus, and release of tumor necrosis factor from vascular endothelial cells. This protein binds calcium and has EF-folding domains. [provided by RefSeq, Oct 2011]
UniProt Code:P80303
NCBI GenInfo Identifier:224471846
NCBI Gene ID:4925
NCBI Accession:P80303.2
UniProt Secondary Accession:P80303,Q8NFT5, A8K642, D3DQX5,
UniProt Related Accession:P80303
Molecular Weight:50,201 Da
NCBI Full Name:Nucleobindin-2
NCBI Synonym Full Names:nucleobindin 2
NCBI Official Symbol:NUCB2
NCBI Official Synonym Symbols:NEFA; HEL-S-109
NCBI Protein Information:nucleobindin-2; nesfatin 1; nesfatin-1; prepronefastin; prepronesfatin; nucleobinding 2; DNA-binding protein NEFA; gastric cancer antigen Zg4; epididymis secretory protein Li 109
UniProt Protein Name:Nucleobindin-2
UniProt Synonym Protein Names:DNA-binding protein NEFA; Gastric cancer antigen Zg4; PrepronesfatinCleaved into the following chain:Nesfatin-1
Protein Family:Nucleobindin
UniProt Gene Name:NUCB2
UniProt Entry Name:NUCB2_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Equilibrate the TMB substrate for at least 30 min at 37°C beforeuse. When diluting samples and reagents, they must be mixed completely andevenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coatedplate respectively, and then, record their positions. It isrecommended to measure each standard and sample in duplicate. Washplate 2 times before adding standard, sample and control (zero) wells!
2.Add Sample and Biotin-detection antibody: Add 50µL of Standard, Blank or Sample per well. The blankwell is added with Sample Dilution Buffer. Immediately add 50 µL of biotin-labelled antibody workingsolution to each well. Cover with the plate sealer provided. Gently tap the plate to ensure thoroughmixing. Incubate for 45 minutes at 37°C. (Solutions are added to the bottom of micro-ELISA platewell, avoid touching plate walls and foaming).
3.Wash: Aspirate each well and wash, repeating the process three timesWash by filling each well with Wash Buffer (approximately 350µL)using a squirt bottle, multi-channel pipette, manifold dispenser orautomated washer. Complete removal of liquid at each step is essentialto good performance. After the last wash, remove any remaining WashBuffer by aspirating or decanting. Invert the plate and pat it againstthick clean absorbent paper.
4.HRP-Streptavidin Conjugate(SABC): Add 100µL of SABC workingsolution to each well. Cover with a new Plate sealer. Incubate for30minutes at 37°C.
5.Wash: Repeat the aspiration/wash process for five times.
6.TMB Substrate: Add 90µL of TMB Substrate to each well. Coverwith a new Plate sealer. Incubate for about 10-20 minutes at 37°C.Protect from light. The reaction time can be shortened or extendedaccording to the actual color change, but not more than 30minutes.When apparent gradient appeared in standard wells, you can terminatethe reaction.
7.Stop: Add 50µL of Stop Solution to each well. Color turn toyellow immediately. The adding order of stop solution should be as thesame as the substrate solution.
8.OD Measurement: Determine the optical density (OD Value) of each wellat once, using a microplate reader set to 450 nm. You should open themicroplate reader ahead, preheat the instrument, and set the testing parameters.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample TypeProtocol
SerumIf using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

PlasmaCollect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal FluidCollect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatantCollect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysatesSolubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenatesThe preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysatesRinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast MilkCollect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products