Human NCOR2 / Nuclear Receptor Corepressor ELISA Kit (HUFI00643)
- SKU:
- HUFI00643
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- O75376
- Sensitivity:
- 9.375pg/ml
- Range:
- 15.625-1000pg/ml
- ELISA Type:
- Sandwich
- Synonyms:
- NCOR1, N-CoR, N-CoR1, TRAC1, hN-CoR, nuclear receptor corepressor 1, nuclear receptor co-repressor 1
- Reactivity:
- Human
- Research Area:
- Cell Biology
Description
Human NCOR2/Nuclear Receptor Corepressor ELISA Kit
The Human NCOR2 (Nuclear Receptor Corepressor 2) ELISA Kit is specifically designed for the quantitative detection of NCOR2 levels in human samples including serum, plasma, and cell culture supernatants. This kit offers high sensitivity and accuracy, ensuring consistent and dependable results for various research applications.NCOR2 is a key protein involved in transcriptional regulation, acting as a corepressor for nuclear receptors. Dysregulation of NCOR2 has been implicated in various diseases such as cancer, metabolic disorders, and neurological conditions.
Therefore, accurate measurement of NCOR2 levels is crucial for understanding its role in disease pathogenesis and developing potential therapeutic interventions.With its reliable performance and ease of use, the Human NCOR2 ELISA Kit is an essential tool for researchers studying the molecular mechanisms of disease and exploring novel treatment options. Get your kit today and advance your research with confidence.
| Product Name: | Human NCOR2 / Nuclear Receptor Corepressor ELISA Kit |
| Product Code: | HUFI00643 |
| Size: | 96 Assays |
| Alias: | NCOR1, N-CoR, N-CoR1, TRAC1, hN-CoR, nuclear receptor corepressor 1, nuclear receptor co-repressor 1 |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human NCOR1 concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 9.375pg/ml |
| Range: | 15.625-1000pg/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human NCOR1 and the recovery rates were calculated by comparing the measured value to the expected amount of Human NCOR1 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human NCOR1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | O75376 |
| UniProt Protein Function: | N-CoR1: is a protein that regulates the activity of some transcription factors, including nuclear receptors, by promoting histone deacetylation and chromatin condensation, thereby altering the accessibility of various genes to the transcriptional machinery. Is known to play a role genetic programming including that for myogenesis. Is a component of a large corepressor complex that contains SIN3A/B and histone deacetylases HDAC1 and HDAC2. This complex associates with the thyroid and the retinoic acid receptors in the absence of ligand. Interacts with the catalytic domain of HDAC9. Increased expression correlates with the loss of vitamin D responsiveness in aggressive androgen-independent prostate cancer cells. Its gene tends to be overexpressed in multiple-myeloma cell lines. |
| UniProt Protein Details: | Protein type:Nuclear receptor co-regulator; Transcription, coactivator/corepressor Chromosomal Location of Human Ortholog: 17p11.2 Cellular Component: histone deacetylase complex; membrane; nuclear chromatin; nucleoplasm; nucleus; Sin3 complex; spindle microtubule; transcriptional repressor complex Molecular Function:histone deacetylase binding; ligand-dependent nuclear receptor binding; nuclear hormone receptor binding; protein binding; thyroid hormone receptor binding; transcription corepressor activity Biological Process: cellular lipid metabolic process; circadian rhythm; negative regulation of JNK cascade; negative regulation of transcription from RNA polymerase II promoter; spindle assembly; transcription from RNA polymerase II promoter |
| NCBI Summary: | This gene encodes a protein that mediates ligand-independent transcription repression of thyroid-hormone and retinoic-acid receptors by promoting chromatin condensation and preventing access of the transcription machinery. It is part of a complex which also includes histone deacetylases and transcriptional regulators similar to the yeast protein Sin3p. This gene is located between the Charcot-Marie-Tooth and Smith-Magenis syndrome critical regions on chromosome 17. Alternate splicing results in multiple transcript variants. Pseudogenes of this gene are found on chromosomes 17 and 20.[provided by RefSeq, Jun 2010] |
| UniProt Code: | O75376 |
| NCBI GenInfo Identifier: | 47117817 |
| NCBI Gene ID: | 9611 |
| NCBI Accession: | O75376.2 |
| UniProt Secondary Accession: | O75376,Q86YY0, Q9UPV5, Q9UQ18, B3DLF8, E9PGV6, |
| UniProt Related Accession: | O75376 |
| Molecular Weight: | |
| NCBI Full Name: | Nuclear receptor corepressor 1 |
| NCBI Synonym Full Names: | nuclear receptor corepressor 1 |
| NCBI Official Symbol: | NCOR1 |
| NCBI Official Synonym Symbols: | N-CoR; TRAC1; N-CoR1; hN-CoR; PPP1R109 |
| NCBI Protein Information: | nuclear receptor corepressor 1 |
| UniProt Protein Name: | Nuclear receptor corepressor 1 |
| Protein Family: | Nuclear receptor corepressor |
| UniProt Gene Name: | NCOR1 |
| UniProt Entry Name: | NCOR1_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human Nuclear receptor corepressor 2 (NCOR2) ELISA Kit (HUEB0594)
Mouse NCOR2 / Nuclear Receptor Corepressor ELISA Kit
Rat NCOR2 / Nuclear Receptor Corepressor ELISA Kit
Mouse Nuclear receptor corepressor 2 (Ncor2) ELISA Kit (MOEB0295)
